August 2006 Rev 31/13
STD15NF10
N-channel 100V - 0.060? - 23A - DP AK
Low gate charge STripFET? II Power MOSFET
General features
■Exceptional dv/dt capability ■100% avalanche tested
■
Application oriented characterization
Description
This MOSFET series realized with
STMicroelectronics unique ST ripFET process has specifically been designed to minimize input capacitance and gate charge. It is therefore suitable as primary switch in advanced high-efficiency, high-frequency isolated DC-DC converters for T elecom and Computer applications. It is also intended for any
applications with low gate drive requirements.
Applications
■
Switching application
Type V DSSS R DS(on)I D STD15NF10
100V
<0.065?
23A
https://www.wendangku.net/doc/0314034853.html,
Order codes
Part number Marking Package Packaging STD15NF10T4
D15NF10
DP AK
Tape & reel
Contents STD15NF10
Contents
1Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 6Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2/13
STD15NF10Electrical ratings
3/13
1 Electrical ratings
Table 1.
Absolute maximum ratings
Symbol Parameter
Value Unit V DS Drain-source voltage (V GS = 0)100V V DGR Drain-gate voltage (R GS = 20K ?)100V V GS Gate-source voltage
± 20V I D Drain current (continuous) at T C = 25°C 23A I D Drain current (continuous) at T C =100°C 16A I DM (1)1.Pulse width limited by safe operating area Drain current (pulsed)92A P TOT Total dissipation at T C = 25°C 70W Derating factor
0.46W/°C E AS (2)
2.Starting T J = 25 o C, I D = 10A, V DD = 30V
Single pulse avalanche energy
180mJ dv/dt (3)3.I SD ≤ 13A, di/dt ≤ 300 A/μs, V DS ≤ V (BR)DSS , T J ≤ T JMAX
Peak diode recovery voltage slope 9V/ns T stg Storage temperature
-55 to 175
°C
T J
Max. operating junction temperature
Table 2.
Thermal data
Symbol Parameter
Value Unit R thJC Thermal resistance junction-case Max 2.14°C/W R thJA Thermal resistance junction-ambient Max 100°C/W T l
Maximum lead temperature for soldering
purpose
300
°C
Electrical characteristics STD15NF10
4/13
2 Electrical characteristics
(T CASE = 25°C unless otherwise specified)Table 3.
On (1) /off states
1. Pulsed: Pulse duration = 300 μs, duty cycle 1.5%
Symbol Parameter
Test conditions Min.Typ.
Max.
Unit V (BR)DSS
Drain-source breakdown
voltage
I D = 250μA, V GS = 0100
V I DSS
Zero gate voltage drain current (V GS = 0)
V DS = Max rating V DS = Max rating, T C = 125°C 110
μA μA
I GSS Gate body leakage current (V DS = 0)
V GS = ±20V
±100nA V GS(th)Gate threshold voltage V DS = V GS , I D = 250μA 2
34V R DS(on)
Static drain-source on resistance
V GS = 10V , I D = 12A
0.06
0.065
?
Table 4.
Dynamic
Symbol Parameter
Test conditions Min.
Typ.Max.
Unit g fs (1)1.Pulsed: pulse duration=300μs, duty cycle 1.5%
Forward transconductance V DS = 15V , I D = 7.5A 12S C iss C oss C rss Input capacitance Output capacitance Reverse transfer capacitance V DS = 25V , f = 1 MHz, V GS = 0
87012550pF pF pF Q g Q gs Q gd
Total gate charge Gate-source charge Gate-drain charge
V DD = 80V , I D = 24A V GS = 10V
30610
21nC nC nC
Table 5.
Switching times
Symbol Parameter
Test conditions Min.
Typ.Max.
Unit t d(on)t r t d(off)t f
Turn-on delay time Rise time
Turn-off delay time Fall time
V DD = 30V , I D = 12A, R G = 4.7?, V GS = 10V Figure 12 on page 8
60454917
ns ns ns ns
STD15NF10Electrical characteristics
5/13
Table 6.
Source drain diode
Symbol Parameter
Test conditions
Min
Typ.
Max Unit I SD Source-drain current 23A I SDM (1)1.Pulse width limited by safe operating area.Source-drain current (pulsed)92A V SD (2)2.Pulsed: pulse duration=300μs, duty cycle 1.5%
Forward on voltage I SD = 20A, V GS = 0 1.5
V t rr Q rr I RRM
Reverse recovery time Reverse recovery charge Reverse recovery current
I SD = 24A,
di/dt = 100A/μs,
V DD = 30V , T J = 150°C Figure 14 on page 8
1003757.5
ns μC A
Electrical characteristics STD15NF10
6/13
2.1 Electrical characteristics (curves)
Figure 1.
Safe operating area Figure 2.
Thermal impedance
Figure 3.
Output characterisics Figure 4.
Transfer characteristics
Figure 5.
Transconductance Figure 6.
Static drain-source on resistance
STD15NF10Electrical characteristics
7/13
Figure 7.
Gate charge vs gate-source voltage Figure 8.
Capacitance variations
Figure 9.
Normalized gate threshold voltage
Figure 10.Normalized on resistance vs
Figure 11.Source-drain diode forward
Test circuit STD15NF10
8/13
3 Test circuit
Figure 12.Switching times test circuit for
Figure 13.Gate charge test circuit
Figure 14.Test circuit for inductive load
Figure 15.Unclamped Inductive load test
Figure 16.Unclamped inductive waveform
STD15NF10Package mechanical data 4 Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK?
packages. These packages have a Lead-free second level interconnect . The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: https://www.wendangku.net/doc/0314034853.html,
9/13
Package mechanical data STD15NF10
10/13
STD15NF10Packaging mechanical data
11/13
5 Packaging mechanical data
TAPE AND REEL SHIPMENT
DPAK FOOTPRINT
DIM.mm inch MIN.
MAX.MIN.
MAX.A 330
12.992
B 1.50.059
C 12.813.20.5040.520
D 20.20.795G 16.418.40.6450.724N 50
1.968
T
22.40.881
BASE QTY BULK QTY 2500
2500REEL MECHANICAL DATA
DIM.mm inch MIN.MAX.MIN.
MAX.
A0 6.87
0.2670.275B010.410.60.4090.417
B112.10.476
D 1.5 1.60.0590.063D1 1.50.059
E 1.65 1.850.0650.073
F 7.47.60.2910.299K0 2.55 2.750.1000.108P0 3.9 4.10.1530.161P17.98.10.3110.319P2 1.9 2.1
0.0750.082R
40
1.574
W
15.7
16.3
0.618
0.641
TAPE MECHANICAL DATA
All dimensions are in millimeters
Revision history STD15NF10
12/13
6 Revision history
Table 7.
Revision history
Date Revision
Changes
09-Sep-20044Complete document 08-Aug-2006
5
New template, updated SOA
STD15NF10
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNL ESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SAL E ST DISCL AIMS ANY EXPRESS OR IMPL IED WARRANTY WITH RESPECT TO THE USE AND/OR SAL E OF ST PRODUCTS INCL UDING WITHOUT L IMITATION IMPL IED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNL ESS EXPRESSL Y APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
? 2006 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
https://www.wendangku.net/doc/0314034853.html,
13/13