TOSHIBA Transistor
Silicon NPN Epitaxial Type (PCT Process)
RN1601,RN1602,RN1603 RN1604,RN1605,RN1606
Switching, Inverter Circuit, Interface Circuit And Driver Circuit Applications
l Including two devices in SM6 (super mini type with 6 leads) l With built-in bias resistors l Simplify circuit design
l Reduce a quantity of parts and manufacturing process l Complementary to RN2601~RN2606
Equivalent Circuit and Bias Resistor Values
Equivalent Circuit (Top View)
Maximum Ratings (Ta = 25°C) (Q1, Q2 Common)
Characteristic Symbol
Rating Unit
Collector-base voltage V CBO 50 V Collector-emitter voltage RN1601~1606
V CEO
50 V
RN1601~1604 10
Emitter-base voltage RN1605, 1606
V EBO
5 V Collector current
I C 100 mA Collector power dissipation P C *
300 mW
Junction temperature T j 150 °C Storage temperature range
RN1601~1606 T stg
?55~150
°C
* Total rating
JEDEC ― EIAJ ―
TOSHIBA 2-3N1A Weight: 0.015g
Type No.
R1 (k ?)
R2
(k ?)RN1601 4.7 4.7 RN1602 10
10
RN1603 22 22
RN1604 47 47 RN1605 2.2
47 RN1606 4.7
47
Unit: mm
Electrical Characteristics (Ta = 25°C) (Q1, Q2 Common)
Characteristic Symbol Test
Circuit
Test Condition
Min Typ.
Max
Unit I CBO ― V CB = 50V, I E = 0 ― ― 100Collector cut-off current
RN1601~1606 I CEO
―
V CE = 50V, I B = 0
―
― 500
nA
RN1601 ― 0.82 ― 1.52RN1602
― 0.38 ― 0.71
RN1603 ― 0.17 ― 0.33
RN1604 ―
V E B = 10V, I C = 0
0.082 ― 0.15RN1605 ― 0.078 ― 0.145
Emitter cut-off current
RN1606 I EBO ―
V EB = 5V, I C = 0
0.074 ― 0.138mA
RN1601 ― 30 ― ― RN1602
― 50 ― ― RN1603 ― 70 ― ―
RN1604 ― 80 ― ― RN1605 ― 80 ― ― DC current gain
RN1606
h FE ― V CE = 5V, I C = 10mA
80
―
―
― Collector-emitter saturation voltage
RN1601~1606 V CE (sat) ―
I C = 5mA,
I B = 0.25mA
― 0.1 0.3 V
RN1601 ― 1.1 ― 2.0 RN1602
― 1.2 ― 2.4 RN1603 ― 1.3 ― 3.0
RN1604 ― 1.5 ― 5.0 RN1605 ― 0.6 ― 1.1 Input voltage (ON)
RN1606
V I (ON) ―
V CE = 0.2V, I C = 5mA
0.7
― 1.3
V RN1601~1604 ― 1.0 ― 1.5
Input voltage (OFF) RN1605~1606 V I (OFF) ― V CE = 5V, I C = 0.1mA 0.5 ― 0.8 V Translation frequency RN1601~1606
f T ― V CE = 10V, I C = 5mA ― 250 ― MHz Collector output capacitance
RN1601~1606 C ob ―
V CB = 10V, I E = 0
f = 1MHz
― 3 6 pF RN1601 ―
3.29
4.7 6.11
RN1602
― 7 10 13
RN1603 ― 15.4 22 28.6
RN1604 ― 32.9 47 61.1RN1605 ― 1.54 2.2 2.86Input resistor
RN1606 R1
―
― 3.29 4.7 6.11
k ?
RN1601~1605
― 0.9 1.0 1.1
RN1605 ― 0.0421 0.0468 0.0515Resistor ratio
RN1606
R1/R2
―
― 0.09 0.1 0.11
―
(Q1 Q2 Common)
(Q1, Q2 Common)
(Q1, Q2 Common)
Type Name Marking
RN1601
RN1602
RN1603
RN1604
RN1605
RN1606
· TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice.
000707EAA
RESTRICTIONS ON PRODUCT USE