Description
Features
? RoHS compliant/Lead-
free
? Ultra low insertion loss
? Surface mountable
? 5kA surge capability
tested with 8/20μS–
Pulse as de?ned by IEC
61000-4-5
? Excellent response to
fast rising transients
? Can be used to meet
Telcordia GR1089
without series
resistance
? 10/700 6kV capability,
as per ITU-T Rec. K.21,
enhanced test level
? 2000 A 2/10μs surge
rating
? Meet FCC part 68
10/160μs waveform,
200A test and 10/560μs
waveform 100A test
? Halogen-free
Applications
? Broadband equipment
? ADSL equipment
? XDSL equipment
? Satellite and CATV
equipment
? General telecom
equipment
Agency Approvals
?SL1002A Series
2 Electrode GDT Graphical Symbol
The Broadband Optimized? SL1002A series has
been especially developed for use in broadband
equipment. Special design features provide high
levels of protection against fast rising transients
in the 100V/μs to 1kV/μs range usually caused by
lightning disturbances. These devices have ultra low
capacitance (typically 1.2pF or less) and present
insigni?cant signal losses up to 1.5GHz. These
devices are extremely robust and are able to divert
a 5000A pulse without destruction. For AC Power
Cross of long duration, overcurrent protection is
recommended.
?2009 Littelfuse, Inc.
36
SL1002A Series
Electrical Characteristics
Product Characteristics
Voltage vs. Time Characteristics
Notes:
1. At delivery AQL 0.65 level II, DIN ISO 2859
2. In ionized mode
3. In ionized mode, tested according to ITU-T Rec. K.12
4. Comparable to the silicon measurement Switching Voltage (Vs)
5. Reference REA PE-80, 0.2A. Tested to ITU-T Rec. K.12 and REA PE-80 < 150 msecs.
6. 300 Applications [150(+) & 150(-)]7
. 10x[5x (+) & 5x (-)] Applications
Device Dimensions Insertion Loss Characteristics
'SM' Type Surface Mount Devices
Typical Insertion Loss Characteristics (600V)
'C' Type Core Devices
Typical Insertion Loss Characteristics (90V)
-18 -16
-14 -12 -10 -8 -6 -4 -2 0 2 1.E+07 1.E+08 1.E+09 1.E+10 1.E+11 S 21 [d B ]
Frequency [Hz]
S 21 [d B ]
Frequency [Hz]
-16 -14
-12 -10 -8 -6 -4 -2 0 2 1.E+07 1.E+08 1.E+09 1.E+10 1.E+11
?2009 Littelfuse, Inc.
38
SL1002A Series
Soldering Parameters - Re?ow Soldering (Surface Mount Devices)
Soldering Parameters - Wave Soldering (Thru-Hole Devices)
Soldering Parameters - Hand Soldering
T T e m p e r a t u r e (°C ) - M e a s u r e d o n b o t t o m s i d e o f b o a r d
Solder Dwell T ime:
2-5 seconds
Recommended Process Parameters:
Solder Iron Temperature: 350° C +/- 5°C Heating Time: 5 seconds max.
Packaging
‘C’ Type Core Items: Package bulk pack in polybag, 1000 pcs/bag
Part Numbering System and Ordering Information
C = Core (Packed in polybag, 1000pcs/bag)
SM = Surface Mount (Packed in carrier and tape, 1000pcs/reel)
Voltage
Surge Capability Pin Con?guration
SL1002 A XXX X X
'SM' Type Surface Mount Items: Packaged tape and reel carrier, 1000 pcs/reel (speci?cations below)