文档库 最新最全的文档下载
当前位置:文档库 › 量具中英文对照

量具中英文对照

量具中英文对照
量具中英文对照

量具中英文对照

卡尺类

1.游标卡尺vernier caliper

2.带表卡尺dial caliper

3.电子数显卡尺

calliper with electronic digital display

4.深度标游卡尺depth vernier caliper

5.电子数显深度卡尺

depth caliper with electronic digital display

6.带表高度卡尺dial height calliper

7.高度游标卡尺height vernier caliper

8.电子数显高度卡尺height caliper with electronic digital display

9.焊接检验尺calliper for welding inspection

千分尺类

1.测微头micrometer head

2.外径千分尺external micrometer

3.杠杆千分尺micrometer with dial comparator

4.带计数器千分尺micrometer with counter

5.电子数显外径千分尺

micrometer with electronic digital display

6.小测头千分尺small anvil micrometer

7.尖头千分尺point micrometer

8.板厚千分尺sheet metal micrometer

9.壁厚千分尺tube micrometer

10.叶片千分尺blade micrometer

11.奇数沟千分尺odd fluted micrometer

12.深度千分尺depth micrometer

13.内径千分尺internal micrometer

14.单杆式内径千分尺

single-body internal micrometer

15.表式内径千分尺 dail internal micrometer

16.三爪式内径千分尺

three point internal micrometer

17.电子数显三爪式内径千分尺

three point internal micrometer

18.内测千分尺inside micrometer

长度测量器具

量具类

1.量块gauge block

2.光滑极限量规plain limit gauge

3.塞规plug gauge

4.环规ring gauge 卡规snap gauge

5.塞尺feeler gauge

6.钢直尺steel gauge

7.精密玻璃线纹尺precision glass linear scale

8.精密金属线纹尺precision metal linear scale

9.半径样板radius template

测量器具术语

1.实物量具示值误差error of indication of a material measure

2.测量仪器示值误差error of indication of a measuring instrument

3.重复性误差repeatability error of a measuring instrument

4.回程误差hysteresis error

5.测量力变化variation of measuring force

6.测量力落差hysteresis of measuring force

7.偏移误差bias error (of a measuring instrument)

8.允许误差maximum permissible errors(of measuring instruments)

9.跟踪误差tracking error (of a measuring instrument)

10.响应率误差response-law error (of a measuring instrument)

11.量化误差quantization error (of a measuring instrument)

12.基值误差datum error (of a measuring instrument)

13.零值误差zero error (of a measuring instrument)

14.影响误差influence error

15.引用误差fiducial error

16.位置误差position error

17.线性误差linear error

18.响应特性曲线response characteristic curve

19.误差曲线error curve

20.校准曲线calibration curve

21.修正曲线correction curve

测量器具术语

1.标称值nominal value

2.示值indication(of a measuring instrument)

3.标尺范围scale range

4.标称范围nominal range

5.标尺长度scale length

6.标尺分度scale division

7.分度值value of a scale division

8.标尺间距scale spacing

9.线性标尺linear scale

10.非线性标尺non-linear scale

11.标尺标数scale numbering

12.测量仪器的零位zero of a measuring instrument

13.量程span

14.测量范围measuring range

15.额定工作条件vated operating conditions

16.极限条件reference condition

17.标准条件reference condition

18.仪器常数instrument constant

19.响应特性response characteristic

20.灵敏度senstivity

21.鉴别力discrimination

22.分辨力resolution(of an indicating device)

23.死区dead band

24.准确度accuracy of a measuring instruments

25.准确度等级accuracy class

26.重复性

repeatability of a measuring instrument

27.示值变动性varation of indication

28.稳定度stability

29.可靠性reliability

30.回程hysteresis

31.漂移drift

32.响应时间response time

33.测量力(简称“测力”)measuring force

几何量测量器具术语

1.几何量具测量器具

dimensional measuring instruments

2.长度测量器具length measuring instruments

3.角度测量器具angle measuring instruments

4.坐标测量机coordinate measuring machine

5.形状和位置误差测量器具form and position error measuring instruments

6.表面质量测量器具

surface quality measuring instruments

7.齿轮测量器具gear measuring instruments

8.实物量具(简称“量具”)material measure

9.测量仪器(简称“量仪”)measuring instruments

10.测量链measuring chain

11.测量装置measuring system

12.指示式测量仪器

indicating(measuring )instrument 13.记录式测量仪器

recording(measuring)instrument

14.累计式测量仪器

totalizing(measuring)instrument

15.积分式测量仪器

integrating(measuring)instrument

16.模拟式测量仪器analogue(measuring)instrument

17.数字式测量仪器digital(measuring)instrument

18.测量变换器measuring transducer

19.传感器sensor

20.指示装置indicating device

21.记录装置recording device

22.记录载体recording medium

23.标尺标记scale mark

24.指示器index

25.标尺scale

26.度盘dail

一般术语:

1.几何量 geometrical product

2.量值value(of a quantity)

3.真值true value(of a quantity)

4.约定真值

conventional true value(of a quantity)

5.单位unit(of measurement)

6.测量measurement

7.测试measurement and test

8.检验inspecte

9.静态测量static measurement

10.动态测量dynamic measurement

11.测量原理principle of measurement

12.测量方法method of measurement

13.测量程序measurement procedure

14.被测量measurand

15.影响量influence quantity

16.变换值transformed value(of a measurand)

17.测量信号measurement signal

18.直接测量法direct method of measurement

19.间接测量法indirect method of measurement

20.定义测量法definitive method of measurement

21.直接比较测量法

direct-comparison method of measurement

22.替代测量法substitution method of measurement

23.微差测量法differential method of measurement

24.零位测量法nulll method of measurement

25.测量结果result of a measurement

26.测得值measured value

27.实际值actual value

28.未修正结果

uncorrected result (of a measurement)

29.已修正结果corrected result(of a measurement)

30.测量的准确度accuracy of measurement

31.测量的重复性repeatability of measurement

32.测量复现性reproducibility of measurements

33.实验标准偏差experimental standard deviation

34.测量不确定度uncertainty of measurement

35.测量绝对误差 absolute error of measurement

36.相对误差 relative error

37.随机误差random error

38.系统误差 systematic error

39.修正值correction

40.修正系数correction factor

41.人员误差personal error

42.环境误差environmental error

43.方法误差error of method

44.调整误差adjustment error

45.读数误差reading error

46.视差parallax error

47.估读误差 interpolation error

48.粗大误差parasitic error

49.检定verification

50.校准calibration

51.调准gauging

52.调整adjustment

1.刀口型直尺:knife straigjht edge

2.刀口尺: knife straigjht edge

3.三棱尺three edges straigjht edge

4.四棱尺four edges straigjht edge

5.条式和框式水平仪

bar form and square levels

6.合像水平仪 imaging level meter

7铸铁平板 cast iron surface plate

8.岩石平板 granite surface plate

9.铸铁平尺cast iron straigjht edge

10.钢平尺和岩石平尺

steel and granite straigjht edge

11.圆度仪 roundness measuring instrument

12.电子水平仪electronic level meter

13.表面粗糙度比较样块铸造表面

roughness comparison specimens cast surface 14.表面粗糙度比较样块磨、车、铣、插及刨加工表面Roughness comparisonspecimens-ground, turned, bored,milled,shape and planed 15.表面粗糙度比较样块电火花加工表面

roughness comparison specimens spark-erostion machining surfaces

16.表面粗糙度比较样块抛光加工表面

roughness comparison specimens pollshed surfaces

17.接触式仪器的标称特性

18.轮廓profiles

19.轨迹轮廓 traced profile

20.基准轮廓 reference profile

21.总轮廓 total profile

22.原始轮廓 primary profile

23.残余轮廓residual profile

24.触针式仪器stylus instrument

25.感应位移数字存储触针式量仪displacement sensitive,digitally storing stylus instrument

26.触针式仪器的部件stylus instrument components

27.测量环measurement loop

28.导向基准renfence guide

29.驱动器drive unit

30.测头(传感器)probe(pick-up)

31.拾取单元tracing element

32.针尖stylus tip

33.转换器transducer

34.放大器amplifier

35.模/数转换器analog-to-digital converter

36.数据输入data input

37.数据输出data output

38.轮廓滤波和评定

profile filtering and evaluation

39.轮廓记录器profile recorder

40.仪器的计量特性

metrological characteristics of the instrument

41.静测力的变化change of static measuring force

42.静态测力 static measuring force

43.动态测量力 dynamic measuring force

44.滞后hysteresis

45.测头的测量范围

transmission function for the sine waves

46.仪器的测量范围

measuring range of the instrument

47.模数转换器的量化步距

quantization step of the ADC

48.仪器分辨力 instrument resolution

49.量程分辨力比range-to-resolution ratio

50.测头线性偏差probe linearity deviation

51.短波传输界限

short-wave transmission limitation

52.轮廓垂直成分传输

vertical profile component transmission

53表面粗糙度比较样块抛丸、喷砂加工表面roughness comparison specimens shot blasted and blasted surfaces

54产品结构几何量计术规范

(GPS)geometrical product specifications(GPS) 55表面结构 surface texture

56接触式仪器的标称特性 nominal characteristics of contact instruments

57公法线千分尺micrometer for mearsuring root tangent lenghths of gear teeth

58最大允许误差 maximum permissible error

59圆柱直齿渐开线花键量规 gauges for straight cylindrical involute splines

60齿厚游标卡尺 Gear tooth vernier calipers

61齿轮渐开线样板the involute master of gear 62齿轮螺旋线样板 the helix master of gear

63矩形花键量规gauges for straight –sided splines

64测量蜗杆 master worm

65万能测齿仪

universal gear measuring instrument

66万能渐开线检查仪

universal involute measuring instrument

67齿轮齿距测量仪

gear circular pictch measuring instrument

68万能齿轮测量机

Universal gear measuring machine

69齿轮螺旋线测量仪

gear helix measuring instrument

70便携式齿轮齿距测量仪

manual gear circular pitch measuring instrument 71便携式齿轮基节测量仪

manual gear base pitch measuring instrument

72立式滚刀测量仪

vertical hob measuring instrument

73齿轮双面啮合综合测量仪

Gear dual-flank measuring instrument

74齿轮单面啮合整体误差测量仪

Gear single-flank meshing integrated error measuring instrument

75梯形螺纹量规

gauges for metric trapezoidal screw threads 76工作螺纹量规

work gauges for metric trapezoidal screw threads 77校对螺纹量规check gauges for metric trapezoidal screw threads

78.梯形螺纹量规型式与尺寸 Types and dimensions of metric trapezoidal screw threads

79.普通螺纹量规型式与尺寸 Types and dimensions of gauges purpose screw threads

80.非螺纹密封的管螺纹量规Gauges for pipe threads prcessure-tight joints are not made on the threads

81.螺纹千分尺

Screw thread micrometer

82.最大允许误差 maximum permissible error

83.间隙螺纹量规 Clearance screw gauge

84.量针Bar gauge

85.螺纹样板 Screw thread template

86.用螺纹密封的管螺纹量规

Gauges for pipe threads where pressure-tight joints are made on the threads

87.刀具预调测量仪精度

Accuracy of the presetting instrument

88.薄膜式气动量仪

Membrane type pneumatic measuring instrument 89.光栅线位移测量系统

Grating linear displacement measuring system 90.光栅角位移测量系统

Grating angular displacement measuring system 91.磁栅线位移测量系统

Magnet-grid linear displacement measuring system 92.量块附件

Accessories for gauge blocks

93.V形架

Vee blocks

94.比较仪座

Comparator stand

95.磁性表座

Magnetic stand

96.万能表座

Universal stand for dial indicator

1.刀口型直尺:knife straigjht edge

2.刀口尺: knife straigjht edge

3.三棱尺three edges straigjht edge

4.四棱尺four edges straigjht edge

5.条式和框式水平仪bar form and square levels

6.合像水平仪imaging level meter

7铸铁平板cast iron surface plate

8.岩石平板granite surface plate

9.铸铁平尺cast iron straigjht edge

10.钢平尺和岩石平尺steel and granite straigjht edge

11.圆度仪roundness measuring instrument

12.电子水平仪electronic level meter

13.表面粗糙度比较样块铸造表面roughness comparison specimens cast surface

14.表面粗糙度比较样块磨、车、铣、插及刨加工表面roughness comparison specimens-ground,turned,bored,milled,shape and planed

15.表面粗糙度比较样块电火花加工表面roughness comparison specimens spark-erostion machining surfaces

16.表面粗糙度比较样块抛光加工表面roughness comparison specimens pollshed surfaces

17.接触式仪器的标称特性

18.轮廓profiles

19.轨迹轮廓traced profile

20.基准轮廓reference profile

21.总轮廓total profile

22.原始轮廓primary profile

23.残余轮廓residual profile

24.触针式仪器stylus instrument

25.感应位移数字存储触针式量仪displacement sensitive,digitally storing stylus instrument

26.触针式仪器的部件stylus instrument components

27.测量环measurement loop

28.导向基准renfence guide

29.驱动器drive unit

30.测头(传感器) probe(pick-up)

31.拾取单元tracing element

32.针尖stylus tip

33.转换器transducer

34.放大器amplifier

35.模/数转换器analog-to-digital converter

36.数据输入data input

37.数据输出data output

38.轮廓滤波和评定

profile filtering and evaluation

39.轮廓记录器profile recorder

40.仪器的计量特性metrological characteristics of the instrument 41.静测力的变化change of static measuring force

42.静态测力static measuring force

43.动态测量力dynamic measuring force

44.滞后hysteresis

45.测头的测量范围transmission function for the sine waves

46.仪器的测量范围measuring range of the instrument

47.模数转换器的量化步距quantization step of the ADC

48.仪器分辨力instrument resolution

49.量程分辨力比range-to-resolution ratio

50.测头线性偏差probe linearity deviation

51.短波传输界限short-wave transmission limitation

52.轮廓垂直成分传输vertical profile component transmission1

53表面粗糙度比较样块抛丸、喷砂加工表面roughness comparison specimens shot blasted and blasted surfaces

54产品结构几何量计术规范(GPS)geometrical product specifications(GPS)

55表面结构surface texture

56接触式仪器的标称特性nominal characteristics of contact instruments

57公法线千分尺micrometer for mearsuring root tangent lenghths of gear teeth

58最大允许误差maximum permissible error

59圆柱直齿渐开线花键量规gauges for straight cylindrical involute splines

60齿厚游标卡尺Gear tooth vernier calipers

61齿轮渐开线样板the involute master of gear 62齿轮螺旋线样板the helix master of gear

63矩形花键量规

gauges for straight–sided splines

64测量蜗杆master worm

65万能测齿仪universal gear measuring instrument 66万能渐开线检查仪universal involute measuring instrument

67齿轮齿距测量仪

gear circular pictchmeasuring instrument

68万能齿轮测量机

Universal gear measuring machine

69齿轮螺旋线测量仪

gear helix measuring instrument

70便携式齿轮齿距测量仪

manual gear circular pitch measuring instrument 71便携式齿轮基节测量仪

manual gear base pitch measuring instrument

72立式滚刀测量仪

vertical hob measuring instrument

73齿轮双面啮合综合测量仪

Gear dual-flank measuring instrument

74齿轮单面啮合整体误差测量仪Gear single-flank meshing integrated error measuring instrument 75梯形螺纹量规gauges for metric trapezoidal screw threads

76工作螺纹量规work gauges for metric trapezoidal screw threads

77校对螺纹量规check gauges for metric trapezoidal screw threads

78.梯形螺纹量规型式与尺寸Types and dimensions of metric trapezoidal screw threads

79.普通螺纹量规型式与尺寸Types and dimensions of gauges purpose screw threads

80.非螺纹密封的管螺纹量规Gauges for pipe threads prcessure-tight joints are not made on the threads

81.螺纹千分尺Screw thread micrometer

82.最大允许误差maximum permissible error

83.间隙螺纹量规Clearance screw gauge

84.量针Bar gauge

85.螺纹样板Screw thread template

86.用螺纹密封的管螺纹量规Gauges for pipe threads where pressure-tight joints are made on the threads

87.刀具预调测量仪精度

Accuracy of the presetting instrument

88.薄膜式气动量仪

Membrane type pneumatic measuring instrument 89.光栅线位移测量系统

Grating linear displacement measuring system 90.光栅角位移测量系统

Grating angular displacement measuring system 91.磁栅线位移测量系统Magnet-grid linear displacement measuring system

92.量块附件Accessories for gauge blocks

93.V形架Vee blocks

94.比较仪座Comparator stand

95.磁性表座Magnetic stand

96.万能表座Universal stand for dial indicator

量具中英文对照

量具中英文对照 卡尺类 1.游标卡尺vernier caliper 2.带表卡尺dial caliper 3.电子数显卡尺 calliper with electronic digital display 4.深度标游卡尺depth vernier caliper 5.电子数显深度卡尺 depth caliper with electronic digital display 6.带表高度卡尺dial height calliper 7.高度游标卡尺height vernier caliper 8.电子数显高度卡尺height caliper with electronic digital display 9.焊接检验尺calliper for welding inspection 千分尺类 1.测微头micrometer head 2.外径千分尺external micrometer 3.杠杆千分尺micrometer with dial comparator 4.带计数器千分尺micrometer with counter 5.电子数显外径千分尺 micrometer with electronic digital display 6.小测头千分尺small anvil micrometer 7.尖头千分尺point micrometer 8.板厚千分尺sheet metal micrometer 9.壁厚千分尺tube micrometer 10.叶片千分尺blade micrometer 11.奇数沟千分尺odd fluted micrometer 12.深度千分尺depth micrometer 13.内径千分尺internal micrometer 14.单杆式内径千分尺 single-body internal micrometer 15.表式内径千分尺 dail internal micrometer 16.三爪式内径千分尺 three point internal micrometer 17.电子数显三爪式内径千分尺 three point internal micrometer 18.内测千分尺inside micrometer 长度测量器具 量具类 1.量块gauge block 2.光滑极限量规plain limit gauge 3.塞规plug gauge 4.环规ring gauge 卡规snap gauge 5.塞尺feeler gauge 6.钢直尺steel gauge 7.精密玻璃线纹尺precision glass linear scale 8.精密金属线纹尺precision metal linear scale 9.半径样板radius template 测量器具术语 1.实物量具示值误差error of indication of a material measure 2.测量仪器示值误差error of indication of a measuring instrument 3.重复性误差repeatability error of a measuring instrument 4.回程误差hysteresis error 5.测量力变化variation of measuring force 6.测量力落差hysteresis of measuring force 7.偏移误差bias error (of a measuring instrument) 8.允许误差maximum permissible errors(of measuring instruments) 9.跟踪误差tracking error (of a measuring instrument) 10.响应率误差response-law error (of a measuring instrument) 11.量化误差quantization error (of a measuring instrument) 12.基值误差datum error (of a measuring instrument) 13.零值误差zero error (of a measuring instrument) 14.影响误差influence error 15.引用误差fiducial error 16.位置误差position error 17.线性误差linear error 18.响应特性曲线response characteristic curve 19.误差曲线error curve 20.校准曲线calibration curve 21.修正曲线correction curve 测量器具术语 1.标称值nominal value 2.示值indication(of a measuring instrument) 3.标尺范围scale range 4.标称范围nominal range 5.标尺长度scale length 6.标尺分度scale division

实验仪器名称中英文对照表

实验仪器名称中英文对照表 仪器中文名称仪器英文名称英文缩写 原子发射光谱仪Atomic Emission Spectrometer AES 电感偶合等离子体发射光谱仪Inductive Coupled Plasma Emission Spectrometer ICP 直流等离子体发射光谱仪 Direct Current Plasma Emission Spectrometer DCP 紫外-可见光分光光度计 UV-Visible Spectrophotometer UV-Vis 微波等离子体光谱仪 Microwave Inductive Plasma Emission Spectrometer MIP 原子吸收光谱仪Atomic Absorption Spectroscopy AAS 原子荧光光谱仪Atomic Fluorescence Spectroscopy AFS 傅里叶变换红外光谱仪FT-IR Spectrometer FTIR 傅里叶变换拉曼光谱仪FT-Raman Spectrometer FTIR-Raman 气相色谱仪 Gas Chromatograph GC 高压/效液相色谱仪High Pressure/Performance Liquid Chromatography HPLC 离子色谱仪 Ion Chromatograph 凝胶渗透色谱仪Gel Permeation Chromatograph GPC 体积排阻色谱 Size Exclusion Chromatograph SEC X射线荧光光谱仪 X-Ray Fluorescence Spectrometer XRF X射线衍射仪X-Ray Diffractomer XRD 同位素X荧光光谱仪Isotope X-Ray Fluorescence Spectrometer 电子能谱仪 Electron Energy Disperse Spectroscopy 能谱仪 Energy Disperse Spectroscopy EDS 质谱仪 Mass Spectrometer MS ICP-质谱联用仪ICP-MS ICP-MS 气相色谱-质谱联用仪 GC-MS GC-MS 液相色谱-质谱联用仪 LC-MS LC-MS 核磁共振波谱仪Nuclear Magnetic Resonance Spectrometer NMR 电子顺磁共振波谱仪 Electron Paramagnetic Resonance Spectrometer ESR 极谱仪 Polarograph 伏安仪 Voltammerter 自动滴定仪 Automatic Titrator 电导仪 Conductivity Meter pH计 pH Meter 水质分析仪 Water Test Kits 电泳仪 Electrophoresis System 表面科学Surface Science 电子显微镜 Electro Microscopy 光学显微镜 Optical Microscopy 金相显微镜 Metallurgical Microscopy 扫描探针显微镜Scanning Probe Microscopy 表面分析仪 Surface Analyzer 无损检测仪 Instrument for Nondestructive Testing 物性分析Physical Property Analysis

常用管道、阀门、材料中英文名称对照

目录 1 管道组成件Piping component (1) 1.1 管子Pipe (1) 1.2 管件Fitting (2) 1.3 弯管Bend (3) 1.4 法兰Flange (FLG) (4) 1.5 垫片Gasket (GSKT) (5) 1.6 阀门Valve (6) 1.7 管道特殊件Piping Specialty (10) 1.8 端部连接End Connection (12) 1 管道组成件Piping component 1.1 管子Pipe 管子(按照配管标准规格制造的) pipe 管子(不按配管标准规格制造的其他用管) tube 钢管steel pipe 铸铁管cast iron pipe 衬里管lined pipe 复合管clad pipe 碳钢管carbon steel pipe 合金钢管alloy steel pipe 不锈钢stainless steel pipe 奥氏体不锈钢管austenitic stainless steel pipe 铁合金钢管ferritic alloy steel pipe 轧制钢管wrought-steel pipe 锻铁管wrought-iron pipe 无缝钢管seamless (SMLS) steel pipe 焊接钢管welded steel pipe 电阻焊钢管electric-resistance welded steel pipe

电熔(弧)焊钢板卷管electric-fusion (arc)-welded steel-plate pipe 螺旋焊接钢管spiral welded steel pipe 镀锌钢管galvanized steel pipe 热轧无缝钢管hot-rolling seamless pipe 冷拔无缝钢管cold-drawing seamless pipe 水煤气钢管water-gas steel pipe 塑料管plastic pipe 玻璃管glass tube 橡胶管rubber tube 直管run pipe; straight pipe 1.2 管件Fitting 弯头elbow 异径弯头reducing elbow 带支座弯头base elbow k半径弯头long radius elbow 短半径弯头short radius elbow 长半径180°弯头long radius return 短半径180°弯头short radius return 带侧向口的弯头(右向或左向)side outlet elbow (right hand or left hand) 双支管弯头(形)double branch elbow 三通tee 异径三通reducing tee 等径三通straight tee 带侧向口的三通(右向或左向)side outlet tee (right hand or 1eft hand) 异径三通(分支口为异径)reducing tee (reducing on outlet) 异径三通(一个直通口为异径)reducing tee (reducing on one run) 带支座三通base tee 异径三通(一个直通口及分支口为异径)reducing tee (reducing on one run and outlet) 异径三通(两个直通口为异径,双头式)reducing tee (reducing on both runs, bull head) 45°斜三通45° lateral 45°斜三通(支管为异径)45° lateral (reducing on branch) 45°斜三通(一个直通口为异径) 45° lateral (reducing on one run) 45°斜三通(一个直通口及支管为异径) 45° lateral (reducing on one run and branch) Y型三通(俗称裤衩)true “Y” 四通cross 等径四通straight cross 异径四通reducing cross

测量专业之计量器具中英文对照总会

计量器具中英文对照汇总表 计量器具中英文对照汇总表: 计量器具中英文对照汇总表-长度测量器具 量具类 1. 量块gaugeblock 2. 光滑极限量规plainlimit gauge 3. 塞规pluggauge 4. 环规ringgauge 卡规snap gauge 5. 塞尺feelergauge 6. 钢直尺steelgauge 7. 精密玻璃线纹尺precision glass linear scale 8. 精密金属线纹尺precision metal linear scale 9. 半径样板radiustemplate 卡尺类 1. 游标卡尺verniercaliper 2. 带表卡尺dialcaliper 3. 电子数显卡尺calliperwith electronic digital display 4. 深度标游卡尺depthvernier caliper 5. 电子数显深度卡尺depthcaliper with electronic digital display 6. 带表高度卡尺dialheight calliper 7. 高度游标卡尺heightvernier caliper 8. 电子数显高度卡尺heightcaliper with electronic digital display 9. 焊接检验尺calliperfor welding inspection 千分尺类 1. 测微头micrometerhead 2. 外径千分尺externalmicrometer 3. 杠杆千分尺micrometer with dial comparator 4. 带计数器千分尺micrometer with counter 5. 电子数显外径千分尺micrometer with electronic digital display 6. 小测头千分尺smallanvil micrometer 7. 尖头千分尺pointmicrometer 8. 板厚千分尺sheetmetal micrometer 9. 壁厚千分尺tubemicrometer 10. 叶片千分尺blademicrometer 11. 奇数沟千分尺oddfluted micrometer 12. 深度千分尺depthmicrometer 13. 内径千分尺internalmicrometer 14. 单杆式内径千分尺single-body internal micrometer

检验仪器名称中英文对照表

检验仪器名称中英文对照表 原子发射光谱仪-- Atomic Emission Spectrometer(AES) 电感偶合等离子体发射光谱仪Inductive Coupled Plasma Emission Spectrometer(ICP) 直流等离子体发射光谱仪-- Direct Current Plasma Emission Spectrometer(DCP) 紫外-可见光分光光度计-- UV-Visible Spectrophotometer(UV-Vis) 微波等离子体光谱仪-- Microwave Inductive Plasma Emission Spectrometer(MIP) 原子吸收光谱仪-- Atomic Absorption Spectroscopy(AAS) 原子荧光光谱仪-- Atomic Fluorescence Spectroscopy(AFS) 傅里叶变换红外光谱仪-- FT-IR Spectrometer(FTIR) 傅里叶变换拉曼光谱仪-- FT-Raman Spectrometer(FTIR-Raman) 气相色谱仪-- Gas Chromatograph(GC) 高压/效液相色谱仪High Pressure/Performance Liquid Chromatography(HPLC) 离子色谱仪-- Ion Chromatograph 凝胶渗透色谱仪-- Gel Permeation Chromatograph(GPC) 体积排阻色谱-- Size Exclusion Chromatograph(SEC) X射线荧光光谱仪-- X-Ray Fluorescence Spectrometer(XRF) X射线衍射仪-- X-Ray Diffractomer(XRD) 同位素X荧光光谱仪-- Isotope X-Ray Fluorescence Spectrometer 电子能谱仪-- Electron Energy Disperse Spectroscopy 能谱仪-- Energy Disperse Spectroscopy(EDS) 质谱仪-- Mass Spectrometer(MS) ICP-质谱联用仪-- ICP-MS 气相色谱-质谱联用仪-- GC-MS 液相色谱-质谱联用仪--LC-MS 核磁共振波谱仪-- Nuclear Magnetic Resonance Spectrometer(NMR) 电子顺磁共振波谱仪-- Electron Paramagnetic Resonance Spectrometer(ESR) 极谱仪-- Polarograph 伏安仪-- V oltammerter 自动滴定仪--Automatic Titrator 电导仪-- Conductivity Meter pH计-- pH Meter 水质分析仪-- Water Test Kits 电泳仪-- Electrophoresis System 表面科学-- Surface Science 电子显微镜-- Electro Microscopy 光学显微镜-- Optical Microscopy 金相显微镜-- Metallurgical Microscopy 扫描探针显微镜- Scanning Probe Microscopy 表面分析仪--Surface Analyzer 无损检测仪--Instrument for Nondestructive Testing 物性分析--Physical Property Analysis 热分析仪--Thermal Analyzer 粘度计--Viscometer

量具中英文对照

量具Measuring Tools 计量Gauging 卡尺――Caliper 0.02 游标卡尺-――Vernier Caliper数显卡尺――Digital Caliper带表卡尺――Digital Slide Caliper CA=Calipers卡尺 深度尺――depth gauge 0.02 数显深度尺――Digital depth gauge 外径深度尺――depth micrometer DI=Depth Indicator深度测试仪 千分尺micrometer 0.01 外径千分尺――external micrometer, 外径千分尺outside micrometer 内径千分尺――Internal micrometer内径千分尺micrometer inside caliper;inside micrometer 深度千分尺micrometer depth gauge; depth micrometer 卡钳式内径千分尺-Internal quick caliper dial gauge 外径千分尺标准棒――micrometer standard 外径千分尺架子――micrometer stand 带表外径千分尺――Indicator dial micrometer MI=Micrometer千分尺 千分表-Dial indicator 数显千分表-Digital indicator 千分表外径规―――Dial indicator snap gauges 平面规surface gauge 磁性吸座--Magnetic stand 孔的轮廓量规-Bore profile gauge KT 点接触杠杆千分表---Lever dial indicator point contact length 可调的磁力架----Magnetic stand with fine adjustment 高度尺height gauge 0.02 游标高度尺---Vernier height gauge 数显游标高度尺Digital height gauge MH=Height tester高度测试仪 尺规\刀规-Straight edge 板规plate gauge 中心规centre gauge 锥度规taper gauge 比例规proportional dividers 标准规standard gauge 齿轮规gear tooth gauge 分线规divider;dividers 工作量规working gauge 厚薄规feeler(gauge) 角规angle gauge 块规gauge(block) 量规gauge 螺距规screw pitch gauge 螺纹千分尺screw micrometer 内卡钳inside caliper 外卡钳outside caliper

量具中英文对照表

量具中英文对照表(机械专业) 游标卡尺-――Vernier Caliper 数显卡尺――Digital Caliper 带表卡尺――Digital Slide Caliper 深度――depth gauge 数显深度尺――Digital depth gauge 卡尺――Caliper 角尺――angle square 钢尺――steel rule 外径千分尺――external micrometer, 平面规surface gauge 外径千分尺――external micrometer 外径千分尺标准棒――micrometer standard 外径千分尺架子――micrometer stand 带表外径千分尺――Indicator dial micrometer 千分表外径规―――Dial indicator snap gauges 外径深度尺――depth micrometer 内径千分尺――Internal micrometer 花岗岩平台(精度1极)Granite table, accuracy 1装有T型槽的平台-Tenon and T-slot incl. installation 千分表-Dial indicator 数显千分表-Digital indicator 磁性吸座--Magnetic stand

孔的轮廓量规-Bore profile gauge KT 卡钳式内径千分尺-Internal quick caliper dial gauge 点接触杠杆千分表---Lever dial indicator point contact length 可调的磁力架----Magnetic stand with fine adjustment 游标高度尺---Vernier height gauge 游标高度尺Digital height gauge 尺规\刀规-Straight edge 直尺-steel ruler 角尺-Square 卷尺Locking tape measure

实验室常见仪器中英文对照表

实验室常见仪器中英文对照表 量杯measuring cup 烧杯beaker 量筒measuring flask/measuring cylinder 量筒graduated flask/measuring cylinder 坩埚crucible 坩埚钳crucible clamp 坩埚crucible pot, melting pot 试管test tube 试管架test tube holder 漏斗funnel 分液漏斗separatory funnel 烧瓶flask 锥形瓶conical flask 塞子stopper 洗瓶plastic wash bottle 滴定管burette 玻璃活塞stopcock 冷凝器condenser 试剂瓶reagent bottles 玻棒glass rod 搅拌棒stirring rod 蒸馏烧瓶distilling flask 碘量瓶iodine flask 表面皿watch glass 蒸发皿evaporating dish 容量瓶volumetric flask/measuring flask 移液管(one-mark) pipette 刻度移液管graduated pipettes 称量瓶weighing bottle 吸液管pipette 滤管filter 天平balance/scale 分析天平analytical balance 台秤platform balance 游码crossbeams and sliding weights 酒精灯alcohol burner 酒精喷灯blast alcohol burner 搅拌装置stirring device 洗耳球rubber suction bulb 研磨钵mortar 研磨棒pestle 玛瑙研钵agate mortar

量具中英文对照

量具中英文对照 量具 Measuring Tools 板规 plate gauge 比例规 proportional dividers 标准规 standard gauge 齿轮规 gear tooth gauge 丁字尺 T-square 分线规 divider;dividers 钢尺 steel rule 工作量规 working gauge 厚薄规 feeler(gauge) 角尺 angle square 角规 angle gauge 金属卷尺 metallic tape 卡尺 calipers;caliper 刻度尺 graduation ruler 块规 gauge(block) 量规 gauge 螺距规 screw pitch gauge 螺纹千分尺 screw micrometer 内径千分尺 micrometer inside caliper;inside micrometer 内卡钳 inside caliper 皮尺 tape(/measure) 平面规 surface gauge 千分表 dial indicator 千分尺 micrometer 曲尺carpenter’s square 三角尺 set square 深度千分尺 micrometer depth gauge; depth micrometer 椭圆规 ellipsograph 外径千分尺 outside micrometer 外卡钳 outside caliper 隙规 gap(/clearance) gauge 线规 wire gauge 斜角规 bevel square

游标卡尺 vernier caliper 圆规 compasses 折尺 folding pocket measure(/ruler) 直尺 straight edge 中心规 centre gauge 锥度规 taper gauge 组合角尺 combination set 可调的磁力架----Magnetic stand with fine adjustment 点接触杠杆千分表 ---Lever dial indicator point contact length 卡钳式内径千分尺-Internal quick caliper dial gauge 孔的轮廓量规-Bore profile gauge KT 磁性吸座--Magnetic stand 花岗岩平台(精度1极)Granite table, accuracy 1 外径千分尺标准棒――micrometer standard 装有T型槽的平台-Tenon and T-slot incl. installation

常用材料中英文对照表

常用原材料英文缩写与中文名称对照表A 英文缩写全称 A/MMA 丙烯腈/甲基丙烯酸甲酯共聚物 AA 丙烯酸 AAS 丙烯酸酯-丙烯酸酯-苯乙烯共聚物 ABFN 偶氮(二)甲酰胺 ABN 偶氮(二)异丁腈 ABPS 壬基苯氧基丙烷磺酸钠 B 英文缩写全称 BAA 正丁醛苯胺缩合物 BAC 碱式氯化铝 BACN 新型阻燃剂 BAD 双水杨酸双酚A酯 BAL 2,3-巯(基)丙醇 BBP 邻苯二甲酸丁苄酯 BBS N-叔丁基-乙-苯并噻唑次磺酰胺 BC 叶酸 BCD β-环糊精 BCG 苯顺二醇 BCNU 氯化亚硝脲 BD 丁二烯 BE 丙烯酸乳胶外墙涂料 BEE 苯偶姻乙醚 BFRM 硼纤维增强塑料 BG 丁二醇 BGE 反应性稀释剂 BHA 特丁基-4羟基茴香醚 BHT 二丁基羟基甲苯 BL 丁内酯 BLE 丙酮-二苯胺高温缩合物 BLP 粉末涂料流平剂 BMA 甲基丙烯酸丁酯 BMC 团状模塑料 BMU 氨基树脂皮革鞣剂

BN 氮化硼 BNE 新型环氧树脂 BNS β-萘磺酸甲醛低缩合物 BOA 己二酸辛苄酯 BOP 邻苯二甲酰丁辛酯 BOPP 双轴向聚丙烯 BP 苯甲醇 BPA 双酚A BPBG 邻苯二甲酸丁(乙醇酸乙酯)酯 BPF 双酚F BPMC 2-仲丁基苯基-N-甲基氨基酸酯 BPO 过氧化苯甲酰 BPP 过氧化特戊酸特丁酯 BPPD 过氧化二碳酸二苯氧化酯 BPS 4,4’-硫代双(6-特丁基-3-甲基苯酚) BPTP 聚对苯二甲酸丁二醇酯 BR 丁二烯橡胶 BRN 青红光硫化黑 BROC 二溴(代)甲酚环氧丙基醚 BS 丁二烯-苯乙烯共聚物 BS-1S 新型密封胶 BSH 苯磺酰肼 BSU N,N’-双(三甲基硅烷)脲 BT 聚丁烯-1热塑性塑料 BTA 苯并三唑 BTX 苯-甲苯-二甲苯混合物 BX 渗透剂 BXA 己二酸二丁基二甘酯 BZ 二正丁基二硫代氨基甲酸锌 C 英文缩写全称 CA 醋酸纤维素 CAB 醋酸-丁酸纤维素 CAN 醋酸-硝酸纤维素 CAP 醋酸-丙酸纤维素 CBA 化学发泡剂

化学仪器设备名称(中英文对照)

原子发射光谱仪Atomic Emission Spectrometer AES 电感偶合等离子体发射光谱仪Inductive Coupled Plasma Emission Spectrometer ICP 直流等离子体发射光谱仪Direct Current Plasma Emission Spectrometer DCP 紫外-可见光分光光度计UV-Visible Spectrophotometer UV-Vis 微波等离子体光谱仪Microwave Inductive Plasma Emission Spectrometer MIP 原子吸收光谱仪Atomic Absorption Spectroscopy AAS 原子荧光光谱仪Atomic Fluorescence Spectroscopy AFS 傅里叶变换红外光谱仪FT-IR Spectrometer FTIR 傅里叶变换拉曼光谱仪FT-Raman Spectrometer FTIR-Raman 气相色谱仪Gas Chromatograph GC 高压/效液相色谱仪High Pressure/Performance Liquid Chromatography HPLC 离子色谱仪Ion Chromatograph 凝胶渗透色谱仪Gel Permeation Chromatograph GPC 体积排阻色谱Size Exclusion Chromatograph SEC X 射线荧光光谱仪X-Ray Fluorescence Spectrometer XRF X 射线衍射仪X-Ray Diffractomer XRD 同位素X 荧光光谱仪Isotope X-Ray Fluorescence Spectrometer 电子能谱仪Electron Energy Disperse Spectroscopy 能谱仪Energy Disperse Spectroscopy EDS 质谱仪Mass Spectrometer MS ICP-质谱联用仪ICP-MS ICP-MS 气相色谱-质谱联用仪GC-MS GC-MS 液相色谱-质谱联用仪LC-MS LC-MS 核磁共振波谱仪Nuclear Magnetic Resonance Spectrometer NMR 电子顺磁共振波谱仪Electron Paramagnetic Resonance Spectrometer ESR 极谱仪Polarograph 伏安仪V oltammerter 自动滴定仪Automatic Titrator 电导仪Conductivity Meter pH 计pH Meter 水质分析仪Water Test Kits 电泳仪Electrophoresis System 表面科学Surface Science 电子显微镜Electro Microscopy 光学显微镜Optical Microscopy 金相显微镜Metallurgical Microscopy 扫描探针显微镜Scanning Probe Microscopy 表面分析仪Surface Analyzer 无损检测仪Instrument for Nondestructive Testing 物性分析Physical Property Analysis 热分析仪Thermal Analyzer 粘度计Viscometer

vray各种材质中英文对照参数大全

1.白色乳胶漆 Diffuse (漫反射)245 Reflect (反射) 23 Hight glossiness (高光) 取消Trace reflections (跟踪反射) 2.清玻璃 Diffuse (漫反射)R30 G88 B98 Reflect (反射) 255 Hight glossiness (高光) Refl glossiness (光泽) Refract (折射) 255 开启Fresnel reflect (菲尼尔反射) 3.磨砂玻璃 Diffuse (漫反射)255 Diffuse (漫反射)/Refract (折射) 200 Subdivs (细分) 4 Glossiness(光泽度) IOR (折射率) 在Bump(凹凸)通道中添加Noise(澡波)贴图, 调整size(大小)开启Fresnel reflect (菲尼尔反射)4.不锈钢材质 Diffuse (漫反射)60 Reflect (反射) 200 Hight glossiness (高光) Refl glossiness (光泽)

5.白陶瓷 Diffuse (漫反射)250 在Reflect (反射)中添加 Falloff (衰减)贴图Falloff Fype (衰减类型)修 改为Fresne (菲尼尔衰减) Hight glossiness (高光) Refl glossiness (光泽) Subdivs (细分) 15 BRDF (双向反射分布函数)改为WARD (沃德)<高光区 域最大> Anisotropy(各向异性) Rotalion (旋转)70在Maps(贴图)通道中添加Output(输出) 修改Output(输出量) 6.铝塑板材质 Diffuse (漫反射)蓝灰色 Reflect (反射) 30 Hight glossiness (高光) glossiness (光泽) 7.白油 Diffuse (漫反射)250 Reflect (反射)25-30 Hight glossiness (高光)glossiness (光泽) Subdivs (细分) 12-16 8.沙发布纹(标准材质)standard 明暗器窗口中选择 oren-nayar-Blinn(合成异性)较柔软 Roughness(粗糙度)70 Diffuse (漫反射)添加Bitmap(位图)将贴图复制到Bump

仪器中文英文名称对照

仪器中文名称仪器英文名称英文缩写 原子发射光谱仪Atomic Emission Spectrometer AES 电感偶合等离子体发射光谱仪Inductive Coupled Plasma Emission Spectrometer ICP 直流等离子体发射光谱仪Direct Current Plasma Emission Spectrometer DCP 紫外-可见光分光光度计UV-Visible Spectrophotometer UV-Vis 微波等离子体光谱仪Microwave Inductive Plasma Emission Spectrometer MIP 原子吸收光谱仪Atomic Absorption Spectroscopy AAS 原子荧光光谱仪Atomic Fluorescence Spectroscopy AFS 傅里叶变换红外光谱仪FT-IR Spectrometer FTIR 傅里叶变换拉曼光谱仪FT-Raman Spectrometer FTIR-Raman 气相色谱仪Gas Chromatograph GC 高压/效液相色谱仪High Pressure/Performance Liquid Chromatography HPLC 离子色谱仪Ion Chromatograph 凝胶渗透色谱仪Gel Permeation Chromatograph GPC 体积排阻色谱Size Exclusion Chromatograph SEC X射线荧光光谱仪X-Ray Fluorescence Spectrometer XRF X射线衍射仪X-Ray Diffractomer XRD 同位素X荧光光谱仪Isotope X-Ray Fluorescence Spectrometer 电子能谱仪Electron Energy Disperse Spectroscopy 能谱仪Energy Disperse Spectroscopy EDS 质谱仪Mass Spectrometer MS ICP-质谱联用仪ICP-MS ICP-MS 气相色谱-质谱联用仪GC-MS GC-MS 液相色谱-质谱联用仪LC-MS LC-MS 核磁共振波谱仪Nuclear Magnetic Resonance Spectrometer NMR 电子顺磁共振波谱仪Electron Paramagnetic Resonance Spectrometer ESR 极谱仪Polarograph 伏安仪Voltammerter 自动滴定仪Automatic Titrator 电导仪Conductivity Meter pH计pH Meter 水质分析仪Water Test Kits 电泳仪Electrophoresis System 表面科学Surface Science 电子显微镜Electro Microscopy 光学显微镜Optical Microscopy 金相显微镜Metallurgical Microscopy 扫描探针显微镜Scanning Probe Microscopy 表面分析仪Surface Analyzer 无损检测仪Instrument for Nondestructive Testing 物性分析Physical Property Analysis 热分析仪Thermal Analyzer 粘度计Viscometer 流变仪Rheometer

分析仪器名称中英文对照表

仪器中文名称仪器英文名称英文缩写原子发射光谱仪Atomic Emission Spectrometer AES 电感偶合等离子体发射光谱仪Inductive Coupled Plasma Emission Spectrometer ICP 直流等离子体发射光谱仪 Direct Current Plasma Emission Spectrometer DCP 紫外-可见光分光光度计 UV-Visible Spectrophotometer UV-Vis 微波等离子体光谱仪 Microwave Inductive Plasma Emission Spectrometer MIP 原子吸收光谱仪Atomic Absorption Spectroscopy AAS 原子荧光光谱仪Atomic Fluorescence Spectroscopy AFS 傅里叶变换红外光谱仪FT-IR Spectrometer FTIR 傅里叶变换拉曼光谱仪FT-Raman Spectrometer FTIR-Raman 气相色谱仪 Gas Chromatograph GC 高压/效液相色谱仪High Pressure/Performance Liquid Chromatography HPLC 离子色谱仪 Ion Chromatograph 凝胶渗透色谱仪Gel Permeation Chromatograph GPC 体积排阻色谱 Size Exclusion Chromatograph SEC X射线荧光光谱仪 X-Ray Fluorescence Spectrometer XRF X射线衍射仪X-Ray Diffractomer XRD 同位素X荧光光谱仪Isotope X-Ray Fluorescence Spectrometer 电子能谱仪 Electron Energy Disperse Spectroscopy 能谱仪 Energy Disperse Spectroscopy EDS 质谱仪 Mass Spectrometer MS ICP-质谱联用仪ICP-MS ICP-MS 气相色谱-质谱联用仪 GC-MS GC-MS 液相色谱-质谱联用仪 LC-MS LC-MS 核磁共振波谱仪Nuclear Magnetic Resonance Spectrometer NMR 电子顺磁共振波谱仪 Electron Paramagnetic Resonance Spectrometer ESR 极谱仪 Polarograph 伏安仪 Voltammerter 自动滴定仪 Automatic Titrator 电导仪 Conductivity Meter pH计 pH Meter 水质分析仪 Water Test Kits 电泳仪 Electrophoresis System 表面科学Surface Science 电子显微镜 Electro Microscopy 光学显微镜 Optical Microscopy 金相显微镜 Metallurgical Microscopy 扫描探针显微镜Scanning Probe Microscopy

量具中英文对照资料讲解

量具中英文对照

量具 Measuring Tools 计量Gauging 卡尺――Caliper 0.02 游标卡尺-――Vernier Caliper数显卡尺――Digital Caliper带表卡尺――Digital Slide Caliper CA=Calipers卡尺 深度尺――depth gauge 0.02 数显深度尺――Digital depth gauge 外径深度尺――depth micrometer DI=Depth Indicator深度测试仪 千分尺 micrometer 0.01 外径千分尺――external micrometer, 外径千分尺 outside micrometer 内径千分尺――Internal micrometer内径千分尺 micrometer inside caliper;inside micrometer 深度千分尺 micrometer depth gauge; depth micrometer 卡钳式内径千分尺-Internal quick caliper dial gauge 外径千分尺标准棒――micrometer standard 外径千分尺架子――micrometer stand 带表外径千分尺――Indicator dial micrometer MI=Micrometer千分尺 千分表-Dial indicator 数显千分表-Digital indicator 千分表外径规―――Dial indicator snap gauges 平面规 surface gauge 磁性吸座--Magnetic stand 孔的轮廓量规-Bore profile gauge KT 点接触杠杆千分表 ---Lever dial indicator point contact length 可调的磁力架----Magnetic stand with fine adjustment 高度尺height gauge 0.02 游标高度尺 ---Vernier height gauge 数显游标高度尺Digital height gauge MH=Height tester高度测试仪 尺规\刀规-Straight edge 板规 plate gauge 中心规 centre gauge 锥度规 taper gauge 比例规 proportional dividers 标准规 standard gauge 齿轮规 gear tooth gauge 分线规 divider;dividers 工作量规 working gauge 厚薄规 feeler(gauge) 角规 angle gauge 块规 gauge(block) 量规 gauge 螺距规 screw pitch gauge 螺纹千分尺 screw micrometer 内卡钳 inside caliper 外卡钳 outside caliper

相关文档