PLA05A-050-R中文资料
https://www.wendangku.net/doc/1917919316.html, 5.0 Watt – Unregulated Wall Plug
PLA05A Linear Replacement
Features
? EISA Level IV Compliant ? Lower Cost than Regulated ? 90 – 264 VAC Input Range ? Zero Minimum Load ? High Efficiency ? Light Weight
? Double Insulated
Applications
? Wireless Communications ? Blue Tooth Device Charger ? Cordless Head Set
? Cell Phone
Safety Approvals
? UL / cUL 60950-1
Mechanical Characteristics
? Length: 66.5 mm (3.07 in) ? Height: 36 mm (1.57 in) ? Width: 28 mm (1.26 in) ? Weight: 70 g ( 2.47 oz)
Dimension Diagram Unit: mm (inch)
Output Voltage / Current Characteristics Curve
Model Nameplate
Voltage PLA05A-050-R 5.0 V PLA05A-090-R 9.0
V
PLA05A-120-R 12.0
V
PLA05A-050-R
PLA05A-090-R
PLA05A-120-R
PLA05A Characteristics
INPUT: Immunity
AC Input Voltage Range EN61000-4-2, Level 3
90 to 264VAC EN61000-4-5, Level 3
AC Inrush Current
40A max @ 240VAC, 25°C General
Input Power Saving Leakage Current
<0.3W max @ 120/240VAC, no load ≤ 10 uA max
California Energy Commission Compliant,
Dielectric Withstand (Hi-pot)
Level IV 3KVAC, Primary to Secondary
MTBF (Full Load, 25°C)
Efficiency
≥ 64.4% 100K Hrs. min. at max load, 25°C ambient and
120VAC
OUTPUT:
DC Output Connector
Ripple (1) 2.1 mm x 5.5 mm Center Positive
300 mVp-p
AC Input Clip
Fixed US blade
Over Voltage Protection
5VDC: OVP shall not exceed 9V Max
9VDC: OVP shall not exceed 16.2V Max
12VDC: OVP shall not exceed 21V Max
Hold-up Time
10 ms (min) @ 120VAC, Half Load
Short Circuit Protection
Auto Recovery
ENVIRONMENTAL:
Operation Temperature (Convection)
0°C ~ 50°C
Storage Temperature
-40°C ~ 85°C
Humidity
90% RH Max
Emissions
FCC Class B
EN55022 class B
Note: (1) Measured after 10 minutes with by-pass
capacitors 0.1uf / 10uf at output connector terminal and
oscilloscope set at 20 MHz.
Phihong reserves the right to make changes without
further notice. Please consult Phihong USA and visit
https://www.wendangku.net/doc/1917919316.html, for the most up-to-date
specifications.
11-11-08