Operating Temperature Range
-40 ~ +105°C -25 ~ +105°C Rated Voltage Range 10 ~ 100Vdc 160 ~ 450Vdc Rated Capacitance Range 560 ~ 56,000μF
47 ~ 2,700μF
Capacitance Tolerance ±20% (M)Max. Leakage Current (μA)After 5 minutes (20°C)
3 x C(μF)V
Max. Tan δ
at 120Hz/20°C W.V. (Vdc)10162535506380100160~400420~450
Tan δ max.
0.550.500.450.400.350.300.250.200.15
0.20Surge Voltage
W.V. (Vdc)10162535506380100160180S.V. (Vdc)
132032446379100125200220W.V. (Vdc)200220250315350385400420450-S.V. (Vdc)
250270300365400435450470500-Ripple Current Correction Factors
Frequency (Hz)
50 (60)120500
1K
10K>
--
---Multiplier at 85°C
10 ~ 100Vdc 0.90 1.00 1.05 1.10 1.15-----160 ~ 250Vdc 0.80 1.00 1.20 1.30 1.50-----315 ~ 450Vdc
0.80 1.00 1.20 1.25 1.40-----Low Temperature
Stability (10 to 250Vdc)Temperature (°C)0-25-40-------Capacitance Change -5%-15%-30%-------Impedance Ratio 1.5
3
12-------
Load Life Test 3,000 hours at +105°C Capacitance Change
Within ±20% of initial measured value Tan δ
Less than 200% of speci? ed maximum value
Leakage Current Less than speci? ed maximum value Shelf Life Test 1,000 hours at +105°C
(no load)
Capacitance Change
Within ±20% of initial measured value Tan δ
Less than 200% of speci? ed maximum value
Leakage Current Less than speci? ed maximum value Surge Voltage Test
Per JIS-C-5141 (table #6, #4)Surge voltage applied: 30 seconds "On" and 5.5 minutes no voltage "Off"
Capacitance Change
Within ±20% of initial measured value Tan δLess than 200% of speci? ed maximum value
Leakage Current Less than speci? ed maximum value Soldering Effect
Refer to JISC5102.8.5
Capacitance Change
Within ±10% of initial measured value
Tan δ
Less than speci? ed maximum value Leakage Current
Less than speci? ed maximum value
Large Can Aluminum Electrolytic Capacitors
NRLRW Series
FEATURES
? EXPANDED VALUE RANGE
? LONG LIFE AT +105°C (3,000 HOURS)? HIGH RIPPLE CURRENT
? LOW PROFILE, HIGH DENSITY DESIGN
? SUITABLE FOR SWITCHING POWER SUPPLIES SPECIFICATIONS
RoHS Compliant
includes all homogeneous materials
*See Part Number System for Details
MECHANICAL CHARACTERISTICS:
1. Safety Vent:
The capacitors are provided with a pressure sensitive safety vent on the top of can which is normally covered by a PVC patch for the purpose of insulation. The vent is designed to rupture in the event that high internal gas pressure is developed by circuit mal f unc t ion or mis-use like reverse voltage.
2. Terminal Strength:
Each terminal of the capacitor shall withstand an axial pull force of 4.5Kg for a period 10 seconds or a radial bent force of 2.5Kg for a period of 30 seconds.
Recommended PC Board Mounting Holes:
Large Can Aluminum Electrolytic Capacitors NRLRW Series
Large Can Aluminum Electrolytic Capacitors NRLRW Series
Large Can Aluminum Electrolytic Capacitors NRLRW Series
Large Can Aluminum Electrolytic Capacitors NRLRW Series
Large Can Aluminum Electrolytic Capacitors NRLRW Series
Large Can Aluminum Electrolytic Capacitors NRLRW Series
Large Can Aluminum Electrolytic Capacitors NRLRW Series
Large Can Aluminum Electrolytic Capacitors NRLRW Series
Large Can Aluminum Electrolytic Capacitors NRLRW Series
Large Can Aluminum Electrolytic Capacitors NRLRW Series