TDS Ultramid KXA-1552 final

Product Description

Halogen-free FR PA9T, 45% glass fiber reinforced

Product description

Physical form and storage

Product safety

Note

BASF South East Asia Pte Ltd

7 Temasek Boulevard #35-01, Suntec Tower One, Singapore 038987

Low warpage, high flow FR long-chain PPA, 45% glass fiber reinforced

The product is supplied dry and ready to use in moisture-proof ackaging in the form of cylindrical or flat pellets. Its bulk density is about 0,7g/cm3. Standard packs are the special 25kg bag and the 000kg bulk container (octagonal IBC=intermediate bulk container made from corrugated board with a liner bag). Subject to agreement other forms of packaging and shipment in tankers by road or rail are also possible. All containers are tightly sealed and should be opened only immediately prior to processing. To ensure that the perfectly dry material delivered cannot absorb moisture from the air the containers must be stored in dry rooms and always carefully sealed again after portions of material have been withdrawn. The product can be kept indefinitely in the undamaged bags.

Experience has shown that product supplied in IBCs can be stored for about 3 months without any adverse effects on processing properties due to moisture absorption. Containers stored in cold

rooms should be allowed to equilibrate to normal temperature so that no condensation forms on the pellets.In case processing is done under conditions as recommended (cf. processing data sheet) melts are thermally stable and do not generate hazards by molecular degradation or the evolution of gases and apors. Like all thermoplastic polymers the product decomposes on exposure to excessive

thermal load, e.g. when it is overheated or as a result of cleaning by burning off. Further information is available from the safety data sheet.

The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our product, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the product for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein may change

without prior information and do not constitute the agreed contractual quality of the product. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. In order to check the availability of products please contact us or our sales agency.

Preliminary Ultramid?

Datasheet

Ultramid KXA-1552

01/2015

FR long-chain PPA, 45% GF

相关推荐
相关主题
热门推荐