P Series
P Series
The CHAMELEON Adaptable Module for General Purpose, DC Applications
The DC version of the “P Series” power entry module offers
full flexibility of design in the most compact package. It is
a general purpose filter specifically designed for DC
applications up to 80VDC. This module comes in snap-in
or flange mount versions for easy mounting. It also allows
for a single or dual fuse option.
The DC version of the “P Series” was designed to address
the increasing demand for filtering on central office
equipment and customer premises equipment, but not
restricted to this type of equipment. Some examples
include routers, desktop servers and switches multiplexors,
aggregators, concentrators, etc.
The DC versions of the P Series mates with a standard
MOLEX connector (HCS Series) which is readily available
and better prevents accidental connection to AC power.
Minimum insertion loss in dB:
Line-to-ground in 50 ohm circuit
Current Frequency-MHz
Rating.03.1.15.51351030
03A7
1721273340445032
6A-812172332364430
10A-35101323273527
Line-to-line in 50 ohm circuit
Current Frequency-MHz
Rating.10.15.51351030
03A24121530485045
6A24121522425545
10A24121522425545
Specifications
Hipot rating (one minute):
line-to-ground2250 VDC
line-to-line1450 VDC
Fuseholder:1/4" x 1 1/4" or
Accepts one or two fuses*5x20 mm
Rated voltage(max):80 VDC
Terminals:.187 x .032 [4.8 x .81]terminal tabs
Operating Ambient Temperature Range:
(@ rated current I r)-10?C to +40?C
In an ambient, T a,higher than +40?C, the maximum
operating current, I o,is as follows:
*Conversion clip provided on fuseholder for single fuse
models.
Electrical Schematic
UL Recognized
CSA Certified
TUV Approved
LINE LOAD
85 - T a
45
I o=I r
154
The CHAMELEON Adaptable Module for General Purpose, DC Applications (Continued)
155
DC Filters
P Series
Case Styles
Case Dimensions
Part No.A B C D
E
F (max)(max)(max)PE
1.980
2.130 2.310 1.120 2.201 1.57550.2954.1058.6728.4555.9140.00PS
1.240
2.130 2.310 1.120 2.201—
31.50
54.1058.67
28.45
55.91
Part Numbers
PE000DD3D PS000DD3D PE000DD6D PS000DD6D PE000DDXD PS000DDXD PE000SD3D PS000SD3D PE000SD6D PS000SD6D PE000SDXD
PS000SDXD DC Connector No.
GA210
PE
PS
Recommended Panel Cutout
+.008/-.000+.20/-.00
+.008/-.000+.20/-.00
Ordering Information
Mounting Style E =Mounting ears S =Snap-in
Extender Options 0=None
Switch Options 0=No switch
Input Voltage Select 0=Single voltage Fuse Options D =Dual fuse S =Single fuse Shield Options D =Complete shield
(DC version)Filter Current 3=3amps 6=6amps X =10amps Filter Type D =DC version P S 000D D 3D
Max..020.508
R Min.
(1)Note:The external
edges (installation side)on the "D" sides of the cutout should have a minimum .020" radius.For optional retention against extraction, the corresponding inner edge should be sharp,without paint or coatings.Edge coatings, including anodization are also discouraged for good shield contact.
Mating Connectors
CORCOM Part Number:
GA210-Custom connector assembly with 2, 36” long 18
gauge wires to mate with P Series filter
MOLEX Component Part Numbers:03-12-1026Connector housing to mate with P Series 18-12-1222
Female Terminal (2 needed per housing)
Red Black