Ansys如何添加径向载荷或者约束
添加约束时经常要用到添加径向载荷,如对一个圆上所有节点添加载荷或者约束,以实现支铰类型的约束。实现这一功能需按以下步骤进行。
1.在圆心点建立一圆柱坐标系。并命名如11。Workplane》local coordinate systems》create local cs》at specified loc,选择圆柱坐标系。
2.激活圆柱坐标系。Workplane》change active cs to》specified coord systems,输入坐标系编号。
3.旋转节点坐标系。Prep》modeling》move/modify》rotate node cs》to active cs。
4.添加约束或载荷时,选择对应方向即可。
(注:圆柱坐标系x,y,z分别对应r,theta,z)