SABIC PC 1414 物性表

LEXAN* EXL1414T Resin

Polycarbonate

SABIC Innovative Plastics

https://www.wendangku.net/doc/3815208504.html,/prospector

Technical Data

1of 4

Form No.TDS-78422-en

temperature (-40°C)ductility in combination with medium flow characteristics and excellent processability with opportunities for shorter IM

cycle times compared to standard PC.Lexan EXL1414T resin is a general purpose product available in transparent and opaque colors and is an

1Features ?Copolymer ?Ductile

?Fast Molding Cycle ?General Purpose ?Good Processability ?Medium Flow

Uses ?General Purpose Appearance

?Clear/Transparent ?Opaque

Processing Method ?

Injection Molding

Specific Gravity

1.19g/cm3ISO 1183Melt Mass-Flow Rate (MFR)(300°C/1.2kg)10g/10min ASTM D1238Melt Volume-Flow Rate (MVR)(300°C/1.2kg)9.50cm3/10min

ISO 1133

Molding Shrinkage Internal Method

Flow:3.20mm

0.40to 0.80%Across Flow:3.20mm 0.40to 0.80%

Water Absorption ISO 62

Saturation,23°C

0.12%

-- 42190MPa ASTM D638--2310MPa ISO 527-2/1Tensile Strength

Yield 557.6MPa ASTM D638Yield

56.8MPa ISO 527-2/50Break 559.1MPa ASTM D638Break

55.3MPa ISO 527-2/50Tensile Elongation

Yield 5 5.6%ASTM D638Yield

5.4%ISO 527-2/50Break 5120%ASTM D638Break

110%ISO 527-2/50Flexural Modulus

50.0mm Span 62180MPa ASTM D790-- 7

2120MPa ISO 178Flexural Strength

-- 7, 8

88.6MPa ISO 178Yield,50.0mm Span 6

92.0MPa

ASTM D790

2of 4

Form No.TDS-78422-en

Charpy Notched Impact Strength

-30°C 60

kJ/m223°C

70kJ/m2

Charpy Unnotched Impact Strength 9ISO 179/1eU

-30°C No Break 23°C

No Break

Notched Izod Impact

-30°C 710J/m ASTM D25623°C 820J/m

ASTM D256-30°C 1055kJ/m2ISO 180/1A 23°C 10

65kJ/m2

ISO 180/1A Unnotched Izod Impact Strength 10ISO 180/1U

-30°C No Break 23°C

No Break

Instrumented Dart Impact ASTM D3763

-30°C,Total Energy 77.4J

1.8MPa,Unannealed,3.20mm 121°C ASTM D6481.8MPa,Unannealed,64.0mm Span 11116°C ISO 75-2/Af Vicat Softening

Temperature

--139°C ASTM D1525 12ISO 306/B120 12--138°C ISO 306/B50Ball Pressure Test (125°C)Pass

IEC 60695-10-2CLTE

Flow:-40to 95°C 0.000067cm/cm/°C ASTM E831Flow:23to 80°C

0.000067cm/cm/°C ISO 11359-2Transverse:-40to 95°C 0.000080cm/cm/°C ASTM E831Transverse:23to 80°C 0.000080cm/cm/°C

ISO 11359-2RTI Elec 130°C UL 7460.800mm HB 3.00mm

V-2 Glow Wire Flammability Index (3.00mm)960°C

IEC 60695-2-12Glow Wire Ignition Temperature IEC 60695-2-13

0.800mm 850°C Haze (2540μm) 3.0%ASTM D1003

Drying Time

3.0to

4.0hr

3of 4

Form No.TDS-78422-en

Suggested Max Moisture 0.020% Suggested Shot Size 40to 60% Rear Temperature 271to 293°C Middle Temperature 282to 304°C Front Temperature 293to 316°C Nozzle Temperature 288to 310°C Processing (Melt)Temp 293to 316°C Mold Temperature 71.1to 93.3°C Back Pressure 0.345to 0.689MPa

Screw Speed 40to 70rpm Vent Depth

0.025to 0.076mm

Notes

1 These links provide you with access to supplier literature.We work hard to keep them up to date;however you may find the most current literature from the supplier.

2

A UL Yellow Card contains UL-verified flammability and electrical characteristics.UL IDES continually works to link Yellow Cards to individual plastic materials in Prospector,however this list may not include all of the appropriate links.It is important that you verify the association between these Yellow Cards and the plastic material found in Prospector.For a complete listing of Yellow Cards,visit the UL Yellow Card Search.

3 Typical properties:these are not to be construed as specifications.

4 50mm/min

5 Type I,50mm/min

6 1.3mm/min

7 2.0mm/min

8 Yield

9

80*10*3sp=62mm 10 80*10*3

11

80*10*4mm

12

Rate A (50°C/h),Loading 2(50N)

4of 4

Form No.TDS-78422-en

Where to Buy

Pittsfield,MA USA

Telephone

:800-845-0600Web :https://www.wendangku.net/doc/3815208504.html,/Telephone :800-531-7106

Web :https://www.wendangku.net/doc/3815208504.html,/Availability :North America

Founded in1986and based in Laramie,Wyoming,IDES is now part of the UL family of companies.UL is a premier global independent safety science company with more than a century of proven history.Employing nearly10,000 professionals in over100countries,UL has five distinct business units--Product Safety,Environment,Life&Health, Knowledge Services and Verification Services--to meet the expanding needs of our customers and to deliver on our public safety mission.

Alternative Resins Search–find replacement plastics within minutes.

Automotive Plastics Search–easily locate automotive approved plastics.

Curve Data–view,overlay and export curve data.

For more information,call:800.788.4668or307.742.9227ext.220