https://www.wendangku.net/doc/3f19001004.html, SELECTION GUIDE
FEATURES
■Wide Temperature Performance at Full 1W Load, –40°C to 85°C
■BS EN 60950 Certified
■ 5.2kVDC Isolation (1 Minute)
■Dual Outputs
■Power Sharing
■SIP Package Style
■Efficiency to 80%
■Power Density 0.42W/cm3
■5V & 12V Input
■5V, 9V, 12V & 15V Output
■Pin Compatible with NMV Series SIP DC/DC Converters
■Footprint 1.91cm2
■UL 94V-0 Package Material
■No Heatsink required
■Internal SMD Construction
■Toroidal Magnetics
■Fully Encapsulated
■MTTF up to 1.6 Million Hours
■Custom Solutions Available
DESCRIPTION
The NMJ series are dual output DC/DC converters in a 7 pin SIP package style offering pin and functionality compatibility with the NMV series SIP DC/DC converters. The series was tested by British Standards Institute (BSI) and received certificate number 8105 issue 2 confirming compliance with BS EN 60950 and IEC 950 safety standards for reinforced insulation. The NMJ series is suitable for applications where safety and miniaturisation are of paramount importance. EN 60950 is derived from IEC 950 and is equivalent to UL 1950 and CSA 950 standards.
Nominal
Input Output Output Isolation
Voltage Voltage Current Efficiency Capacitance MTTF1 Order Code(V)(V)(mA)(%)(pF)kHrs
NMJ0505S55±10065 1.61517 NMJ0509S59±5570 1.6619
NMJ0512S512±4270 1.8313
NMJ0515S515±3370 1.9172
NMJ1205S125±10065 1.8456
NMJ1209S129±5570 1.9318
NMJ1212S1212±4270 2.0211
NMJ1215S1215±3370 2.1136
When operated with additional external load capacitance the rise time of the input voltage will determine the maximum external capacitance value for guaranteed start up. The slower the rise time of the input voltage the
greater the maximum value of the additional external capacitance for reliable start up.
Parameter Conditions MIN TYP MAX Units
Continuous operation, 5V input types 4.55 5.5
Voltage Range
Continuous operation, 12V input types10.81213.2
V
Parameter Conditions MIN TYP MAX Units Rated Power2T A= –40°C to 85°C1W Output Voltage
Accuracy
See tolerance envelope–7.510%
Line Regulation High V
IN
to low V
IN
1.0 1.2%/%
10% load to rated load, 5V output types1015
Load Regulation
10% load to rated load, 9V output types610
% 10% load to rated load, 12V output types610
10% load to rated load, 15V output types610
Ripple & Noise BW=DC to 20MHz, all output types200mV p-p Zero Load Power5V output types275mW Consumption12V output types185
Short-circuit duration3 1 second
Lead temperature 1.5mm from case for 10 seconds300°C
Input voltage V
IN
, NMJ05 types7V
Input voltage V
IN
, NMJ12 types15V
INPUT CHARACTERISTICS
OUTPUT CHARACTERISTICS
ABSOLUTE MAXIMUM RATINGS
1Calculated using MIL-HDBK-217F with nominal input voltage at full load.
2See derating curve
3Supply voltage must be discontinued at the end of the short circuit duration.
All specifications typical at T A=25°C, nominal input voltage and rated output current unless otherwise specified.
NMJ SERIES
5.2kVDC Isolated 1W DC/DC Converters
C&D Technologies (NCL) Limited reserve the right to alter or improve the specification, internal design or manufacturing process at any time, without notice. Please check with your supplier or visit our web site to ensure that you have the current and complete specification for your product before use.? C&D Technologies (NCL) Limited 2003
NDC NM J.4
No part of this publication may be copied, transmitted or stored in a retrieval system or reproduced in any way including, but not limited to,photography, photocopy, magnetic or other recording means, without prior written permission from C&D Technologies (NCL) Limited.
Instructions for use are available from https://www.wendangku.net/doc/3f19001004.html,
C&D Technologies (NCL) Ltd Tanners Drive, Blakelands North Milton Keynes MK14 5BU, England Tel:+44 (0)1908 615232 Fax:+44 (0)1908 617545email: info@https://www.wendangku.net/doc/3f19001004.html, https://www.wendangku.net/doc/3f19001004.html,
C&D Technologies Inc.
3400 E Britannia Drive, Tucson,Arizona 85706, USA Tel: +1 (800) 547-2537Fax: +1 (520) 741-4598email: sales@https://www.wendangku.net/doc/3f19001004.html,
NMJ SERIES
5.2kVDC Isolated 1W DC/DC Converters
MECHANICAL DIMENSIONS
0.77 (19.50)
0.49(12.50)
0.18 (4.60)
0.14 (3.60)
0.022 (0.55)0.018 (0.45)
0.022 (0.55)0.018 (0.45)
0.094(2.40)
0.074±0.021.88±0.507 Pin SIP
167
V IN GND –V 0V +V Weight: 4.9g
All dimensions in mm XX.XX ±0.25mm. All pins on a 2.54mm pitch and within ±0.25mm of true position.
tolerance envelope
+10%+6%V nominal
temperature derating graph
2.0
1.51.00.50
+2.5%–4%
–7.5%
O u t p u t V o l t a g e
10
50
100Output Load Current (%)
-40
050100150
Ambient Temperature (°C)
85°C
Safe Operating Area
0.012 (0.30)0.007 (0.20)