SEN-R-956-017中文资料
TECHNICAL DATA SHEET 4200…SURFACE MOUNT DIE WITH HEAT ABSORBING STANDOFF TERMINAL STRIPS TRANSIENT VOLTAGE SUPPRESSOR 500 WATT SERIES Glass Passivated Die Plus Dual Heat Strips
Features:
? Low Profile
? Broad Voltage Range Available - - 6.8 to 200 Volts ? Broad Spectrum Transient Suppression
? Rapid Response - - 4 nanoseconds typical
? Built-in Heat Absorbing Terminations
? Electrically Similar to Mil-Prf-19500/516 Applications:
? Connector I/O Surge Suppression
? Data Line Protection Description: This is a bipolar transient voltage suppressor series extending from 6.8 volts to 200 volts intended for surface mount applications.
Each device comes as a “Cell” with its own heat absorbing terminals pre-bonded at high temperature. This permits mounting on printed circuit boards that cannot provide their own heat sinking. Each terminal is silver plated and is solderable permitting solder down attachment with a very small footprint. Each unit is bi-symmetrical so any orientation can be used.
ELECTRICAL CHARACTERISTICS
PARAMETER SYMBOL Test Conditions Min TYP Max.Units Response Turn-on Time ton 2 5 ns
Transient Energy Pulse (Cell) Ep 1 10uS rise, I= 0.5Ip at t=100us (exponential
decay)
1500 W
Transient Energy Pulse (Cell) Ep 2 10uS rise, I= 0.5Ip at t=1.0mS (exponential
decay)
500 W
Transient Energy Pulse (Cell) Ep 3 10uS rise, I= 0.5Ip at t=10mS (exponential
decay)
150 W
Transient Energy Pulse (Cell) Ep 4 10uS rise, I= 0.5Ip at t=50mS (exponential
decay)
70 W
Transient Energy Pulse
(Cell)
Ep 5 10uS rise, I= 0.5Ip at t=50mS (step pulse) 50 W Electrical Parameters See Table
Maximum Solder
Temperature
Tmax 10 second exposure 300 oC Thermal Resistance (J-C) ΤJC Assume heat sink on terminal strip ends 18 30 oC/W
Note 1: “Die Only” configuration requires user to provide adequate energy absorption. Note 2: Terminal strips are 0.009” to 0.011” thick copper with nickel and silver plate.
0.034"0.039"
Typ
0.052"0.056"
0.0115"0.0155"
Bipolar Die Only
SEN-R-956-XXX 500Watt TVS Series
Nominal Vz min Vz max TC (nom) Ir max Part Vz Iz @ Iz @ Iz of Vz Vr @ Vr Vcc Ip Number (V) (mA) (V) (V) (%.°C) (V) (uA) (V) (A) SEN-R-956-001 6.8 10 6.40 7.25 0.050 5.0 1600 9.2 54.3 SEN-R-956-002 7.2 10 6.67 7.67 0.060 6.0 1600 10.3 48.5 SEN-R-956-003 7.8 10 7.22 8.30 0.060 6.5 1000 11.2 44.6 SEN-R-956-004 8.4 10 7.78 8.95 0.060 7.0 400 12.0 41.7 SEN-R-956-005 9.0 1 8.33 9.58 0.070 7.5 200 12.9 38.8 SEN-R-956-006 9.6 1 8.89 10.23 0.070 8.0 100 13.6 36.8 SEN-R-956-007 10 1 9.44 10.82 0.070 8.5 20 14.4 34.7 SEN-R-956-008 11 1 10.00 11.50 0.080 9.0 10 15.4 32.5 SEN-R-956-009 12 1 11.10 12.80 0.080 10.0 5 17.0 29.4 SEN-R-956-010 13 1 12.20 14.00 0.080 11.0 5 18.2 27.5 SEN-R-956-011 14 1 13.30 15.50 0.085 12.0 5 19.9 25.1 SEN-R-956-012 15 1 14.40 16.50 0.085 13.0 5 21.5 23.3 SEN-R-956-013 17 1 15.60 17.90 0.085 14.0 5 23.2 21.6 SEN-R-956-014 18 1 16.70 19.20 0.090 15.0 5 24.4 20.5 SEN-R-956-015 19 1 17.80 20.50 0.090 16.0 5 26.0 19.2 SEN-R-956-016 20 1 18.90 21.70 0.090 17.0 5 27.6 18.1 SEN-R-956-017 22 1 20.00 23.30 0.095 18.0 5 29.2 17.1 SEN-R-956-018 24 1 22.20 25.50 0.095 20.0 5 32.4 15.4 SEN-R-956-019 26 1 24.40 28.00 0.095 22.0 5 35.5 14.1 SEN-R-956-020 29 1 26.70 30.70 0.095 24.0 5 38.9 12.9 SEN-R-956-021 31 1 28.90 33.20 0.095 26.0 5 42.1 11.9 SEN-R-956-022 33 1 31.10 35.80 0.095 28.0 5 45.4 11.0 SEN-R-956-023 36 1 33.30 38.30 0.095 30.0 5 48.4 10.3 SEN-R-956-024 39 1 36.70 42.20 0.100 33.0 5 53.3 9.4 SEN-R-956-025 43 1 40.00 46.00 0.100 36.0 5 58.1 8.6 SEN-R-956-026 48 1 44.40 51.10 0.100 40.0 5 64.5 7.8 SEN-R-956-027 51 1 47.80 54.90 0.100 43.0 5 69.4 7.2 SEN-R-956-028 54 1 50.00 57.50 0.100 45.0 5 72.7 6.9 SEN-R-956-029 57 1 53.30 61.30 0.100 48.0 5 77.4 6.5 SEN-R-956-030 61 1 56.7 65.2 0.100 51.0 5 82.4 6.1 SEN-R-956-031 65 1 60.0 69.0 0.100 54.0 5 87.1 5.7 SEN-R-956-032 69 1 64.4 74.1 0.105 58.0 5 93.6 5.3 SEN-R-956-033 72 1 66.7 76.7 0.105 60.0 5 96.8 5.2 SEN-R-956-034 76 1 71.1 81.8 0.105 64.0 5 103.0 4.9 SEN-R-956-035 84 1 77.8 89.5 0.110 70.0 5 113.0 4.4 SEN-R-956-036 90 1 83.3 95.8 0.110 75.0 5 121.0 4.1 SEN-R-956-037 93 1 86.7 99.7 0.110 78.0 5 126.0 4.0 SEN-R-956-038 101 1 94.4 108.2 0.110 85.0 5 137.0 3.6 SEN-R-956-039 108 1 100.0 115.5 0.110 90.0 5 146.0 3.4 SEN-R-956-040 120 1 111.0 128.0 0.110 100.0 5 162.0 3.1 SEN-R-956-041 131 1 122.0 140.5 0.110 110.0 5 177.0 2.8 SEN-R-956-042 143 1 133.0 153.0 0.110 120.0 5 193.0 2.6 SEN-R-956-043 155 1 144.0 165.5 0.110 130.0 5 209.0 2.4 SEN-R-956-044 180 1 167.0 192.5 0.110 150.0 5 243.0 2.1 SEN-R-956-045 192 1 178.0 205.0 0.110 160.0 5 259.0 1.9 SEN-R-956-046 203 1 189.0 217.5 0.110 170.0 5 275.0 1.8
1
Time (s)
Clamp Power vs Time for Sensitron 500W TVS Series
Time (mS)
Exponential Decay Pulse Waveform
Rated Vz of Device (V)
Reverse Junction Capacitance for Sensitron 500W TVS
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement.
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.