当前位置：文档库 › TMP122中文资料

TMP122中文资料

TMP122TMP124

SBOS272B – JUNE 2003 – REVISED DECEMBER 2003

https://www.wendangku.net/doc/423558077.html,

DESCRIPTION

The TMP122 and TMP124 are SPI-compatible temperature sensors available in SOT23-6 and SO-8 packages. Requir-ing only a pull-up resistor for complete function, the TMP122and TMP124 temperature sensors are capable of measuring temperatures within 2°C of accuracy over a temperature range of –40°C to +125°C, with operation up to 150°C.Programmable resolution, programmable set points and shut down function provide versatility for any application. Low supply current and a supply range from 2.7V to 5.5V make the TMP122 and TMP124 excellent candidates for low-power applications.

The TMP122 and TMP124 are ideal for extended thermal measurement in a variety of communication, computer, con-sumer, environmental, industrial, and instrumentation appli-cations.

FEATURES

q DIGITAL OUTPUT: SPI-Compatible Interface q PROGRAMMABLE RESOLUTION:9- to 12-Bits + Sign q ACCURACY:

±1.5°C from –25°C to +85°C (max)±2.0°C from –40°C to +125°C (max)q LOW QUIESCENT CURRENT: 50μA q WIDE SUPPLY RANGE: 2.7V to 5.5V q TINY SOT23-6 AND SO-8 PACKAGES q OPERATION TO 150°C

q PROGRAMMABLE HIGH/LOW SETPOINTS

1.5°C Accurate Programmable Digital Temperature Sensors

with SPI? Interface

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

APPLICATIONS

q POWER-SUPPLY TEMPERATURE MONITORING q COMPUTER PERIPHERAL THERMAL PROTECTION q NOTEBOOK COMPUTERS q CELL PHONES

q BATTERY MANAGEMENT q OFFICE MACHINES

q THERMOSTAT CONTROLS

q ENVIRONMENTAL MONITORING and HVAC

ELECTROMECHANICAL DEVICE TEMPERATURE

TMP122

SO/I

SCK

SPI is a registered trademark of Motorola. All other trademarks are the property of their respective owners.

V+

ALERT

PRODUCTION DATA information is current as of publication date.Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

TMP122, TMP124

SBOS272B

https://www.wendangku.net/doc/423558077.html,

ABSOLUTE MAXIMUM RATINGS (1)

Power Supply, V+..................................................................................7V Input Voltage (2).......................................................................–0.3V to 7V Input Current.....................................................................................10mA Operating Temperature Range ......................................–55°C to +150°C Storage Temperature Range .........................................–60°C to +150°C Junction Temperature (T J Max)....................................................+150°C Lead Temperature (soldering).......................................................+300°C NOTES: (1) Stresses above those listed under “Absolute Maximum Ratings ”may cause permanent damage to the device. Exposure to absolute maximum conditions for extended periods may affect device reliability. (2) Input voltage rating applies to all TMP122 and TMP124 input voltages.

ELECTROSTATIC

DISCHARGE SENSITIVITY

This integrated circuit can be damaged by ESD. Texas Instru-ments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.

SPECIFIED PACKAGE TEMPERATURE

PACKAGE ORDERING TRANSPORT PRODUCT PACKAGE-LEAD

DESIGNATOR (1)

RANGE MARKING NUMBER MEDIA, QUANTITY TMP122

SOT23-6

DBV

–40°C to +125°C

T122

TMP122AIDBVT Tape and Reel, 250"""""TMP122AIDBVR Tape and Reel, 3000

TMP124SO-8D –40°C to +125°C

T124

TMP124AID Rails, 100

TMP124AIDR

Tape and Reel, 2500

PACKAGE/ORDERING INFORMATION

NOTE: (1) For the most current specifications and package information, refer to our web site at https://www.wendangku.net/doc/423558077.html,.

PIN CONFIGURATIONS

TMP122, TMP124

SBOS272B

https://www.wendangku.net/doc/423558077.html,

PARAMETER

CONDITION

MIN TYP

MAX UNITS TEMPERATURE INPUT Range

–40

+125°C Accuracy (Temperature Error)

–25°C to +85°C ±0.5±1.5°C –40°C to +125°C ±1.0±2.0°C –55°C to +150°C

±1.5°C vs Supply –0.3

0.1+0.3

°C/V Resolution (1)

Selectable

±0.0625°C

DIGITAL INPUT/OUTPUT Input Logic Levels:V IH 0.7(V+)

V V IL

0.3(V+)V Input Current, SO/I, SCK, CS 0V ≤ V IN ≤ V+±1μA Output Logic Levels:V OL SO/I I SINK = 3mA 0.4

V V OH SO/I I SOURCE = 2mA (V+)–0.4

V V OL ALERT

I SINK = 4mA 0.4V Leakage Current ALERT

0V ≤ V IN ≤ 6V ±1

μA Input Capacitance, SO/I, SCK, CS, ALERT 2.5

pF Resolution

Selectable 9 to 12 + Sign

Bits Conversion Time

9-Bit + Sign 3040ms 10-Bit + Sign 6080ms 11-Bit + Sign 120160ms 12-Bit + Sign

240

320ms POWER SUPPLY Operating Range 2.7

5.5V Quiescent Current I Q Serial Bus Inactive 5075μA Shutdown Current I SD

Serial Bus Inactive

0.1

1μA TEMPERATURE RANGE Specified Range –40+125°C Operating Range –55+150°C Storage Range

–60

+150

°C Thermal Resistance, θJA

SOT23-6 Surface-Mount 200°C/W SO-8 Surface-Mount

150°C/W

NOTE: (1) Specified for 12-bit resolution.

ELECTRICAL CHARACTERISTICS

At T A = –40°C to +125°C, and V+ = 2.7V to 5.5V, unless otherwise noted.

TMP122, TMP124

SBOS272B

https://www.wendangku.net/doc/423558077.html,

TYPICAL CHARACTERISTICS

At T A = +25°C, and V+ = 5.0V, unless otherwise noted.

QUIESCENT CURRENT vs TEMPERATURE

Temperature (°C)–60

–40–20

100

120140

I Q (μA )

1.00.90.8

0.70.6

0.50.40.30.20.10.0–0.1

SHUTDOWN CURRENT vs TEMPERATURE

Temperature (°C)

–60

–40–20

100

120140

I S D (μA

)

400

300

200

100

CONVERSION TIME vs TEMPERATURE

Temperature (°C)

–60

–40–20

100

120140

C o n v e r s i o n T i m e (m s )

2.01.5

1.00.50.0–0.5–1.0–1.5

–2.0

TEMPERATURE ACCURACY vs TEMPERATURE

Temperature (°C)

–60–40–20

80100120160

140T e m p e r a t u r e E r r o r (°C

)

元器件交易网https://www.wendangku.net/doc/423558077.html,

TMP122, TMP124

SBOS272B

https://www.wendangku.net/doc/423558077.html,

APPLICATIONS INFORMATION

The TMP122 and TMP124 digital temperature sensors are optimal for thermal management and thermal protection appli-cations. The TMP122/TMP124 are SPI interface-compatible and specified for a temperature range of –40°C to +125°C.The TMP122/TMP124 require minimal external components for operation, needing only a pull-up resistor on the ALERT pin and a bypass capacitor on the supply. Bypass capacitors of 0.1μF is recommended. Figure 1 shows typical connec-tions for the TMP122 and TMP124.

FIGURE 1. Typical Connections of the TMP122 and https://www.wendangku.net/doc/423558077.html,MUNICATING WITH THE TMP122

The TMP122/TMP124 converts continuously. If CS is brought low during a conversion the conversion process continues, but the last completed conversion is available at the output regis-ter. Communication with the TMP122/TMP124 is initiated by pulling CS low. The first 16 clocks of data transfer will return temperature data from the temperature sensors. The 16-bit data word is clocked out sign bit first, followed by the MSB. Any portion of the 16-bit word may be read before raising CS . If the user wishes to continue with CS low, the following 16 clocks transfer in a READ or WRITE command. READ and WRITE commands are described in Tables I and II.

The READ command contains an embedded address in bits D4 and D3 to identify which register to read. Bits D4 and D3are internally registered and will hold their value following a READ command until a entire 16-bit read is completed by the user. The completion of the 16-bit READ acknowledges that the READ command has been completed. If the user issues a READ command and then raises CS with less than 16subsequent clocks, the data from that register will be available at the next fall of CS . The registered READ address will remain in effect until a full 16 clocks have been received. After the completion of a 16-bit READ from the part, the READ address is reset to return data from the Temperature Register.A WRITE command to a register will not change the READ address registered. For further discussion on the READ ad-dress register, see the Read Address Register section.Multiple commands may be strung together as illustrated in Figure 2. The TMP122/TMP124 accepts commands alternat-ing with 16-bit response data. On lowering CS , the part always responds with a READ from the address location indicated by the READ address register. If the next com-mand is a READ command then data is returned from the address specified by the READ command with the 16th clock resetting the READ address register to the default tempera-ture register. The TMP122/TMP124 then expect a 16-bit command. If the command is a WRITE command, then the 16 clocks following the command will again return tempera-ture data.

Figures 3, 4, 5, and 6 detail the communication sequences.

To maintain accuracy in applications requiring air or surface temperature measurement, care should be taken to isolate the package and leads from ambient air temperature.

Read Command D15D14D13D12D11D10D9D8D7D6D5D4D3D2D1D0Temperature

1000000000000000Configuration Register 1000000000001000Low Temp Threshold 1000000000010000High Temp Threshold

TABLE I. Read Command.

Write Command D15D14D13D12D11D10D9D8D7D6D5D4D3D2D1D0Configuration Register 0000D1D0R1R0F1F0POL TM1TM0010Low Temp Threshold T12T11T10T9T8T7T6T5T4T3T2T1T0100High Temp Threshold T12T11T10T9T8T7T6T5T4T3T2T1T0110Shutdown Command

TABLE II. Write Command.

16-Bit READ

SO/I

16-Bit READ COMMAND

16-Bit Response

16-Bit WRITE/Embedded Address

16-Bit READ

FIGURE 2.Multiple Command Sequence.

TMP122, TMP124

SBOS272B

https://www.wendangku.net/doc/423558077.html,

FIGURE 3. READ followed by WRITE COMMAND to T LOW /T HIGH Register.

SO/I

SCK SCK CS Z

D10

D11

D12

D13

D14

D15

SO/I

NOTE: (1) 0 indicates T LOW register, 1 indicates T HIGH register.

CS 0

0/1(1)

T10

T11

T12

SO/I

16-Bit READ

(Continued)

...

16-Bit WRITE/Embedded Address

...

SO/I

CS SCK SCK Z

D10

D11

D12

D13

D14

D15

SO/I

CS 0

TM0

TM1

POL

SO/I

16-Bit READ

16-Bit WRITE/Embedded Address

...

(Continued)

...

SO/I

CS Z

D10

D11

D12

D13

D14

D15

SO/I

CS Z

Z 1D3D4D5D6D7D8D9D10D11D12D13D14D15SO/I

CS 0

SO/I

16-Bit READ

16-Bit READ COMMAND

16-Bit Response

CS ...(Continued)

......

(Continued)

...

SCK SCK SCK SO/I

CS Z

D10

D11

D12

D13

D14

D15

SO/I

16-Bit READ

CS SCK FIGURE 4. READ followed by WRITE COMMAND to Configuration Register.

FIGURE 5. READ followed by READ COMMAND and Response.

FIGURE 6. Data READ.

TMP122, TMP124

SBOS272B

https://www.wendangku.net/doc/423558077.html,

READ ADDRESS REGISTER

Figure 7 shows the internal register structure of the TMP122/TMP124. Table III describes the addresses of the registers available. The READ address register uses the two bits to identify which of the data registers should respond to a read command. Following a complete 16-bit read, the READ address register is reset to the default power-up state of P1/P0 equal 0/0.

The user can obtain 9, 10, 11, or 12 bits of resolution by addressing the Configuration Register and setting the reso-lution bits accordingly. For 9-, 10-, or 11-bit resolution, the most significant bits in the Temperature Register are used with the unused LSBs set to zero.

CONFIGURATION REGISTER

The Configuration Register is a 16-bit read/write register used to store bits that control the operational modes of the temperature sensor. Read/write operations are performed MSB first. The format of the Configuration Register for the TMP122/TMP124 is shown in Table VI, followed by a break-down of the register bits. The power-up/reset value of the Configuration Register bits R1/R0 equal 1/1, all other bits equal zero.

TEMPERATURE

DIGITAL OUTPUT (1)

(°C)

(BINARY)HEX 150**** **** 0000 01114B071250011 1110 1000 01113E87250000 1100 1000 01110C870.06250000 0000 0000 1111000F 00000 0000 0000 01110007–0.06251111 1111 1111 1111FFFF –251111 0011 1000 0111F387–55

1110 0100 1000 0111

E487

NOTE: (1) The last 2 bits are high impedance and are shown as 11 in the table.

TABLE V. Temperature Data Format.

TEMPERATURE REGISTER

The Temperature Register of the TMP122/TMP124 is a 16-bit, signed read-only register that stores the output of the most recent conversion. The TMP122/TMP124 are speci-fied for the temperature range of –40°C to +125°C with operation from –55°C to +150°C. Up to 16 bits can be read to obtain data and are described in Table IV. The first 13 bits are used to indicate temperature where bit D2 is 1, and D1,D0 are in a high impedance state. Data format for tempera-ture is summarized in Table V. Following power-up or reset,the Temperature Register will read 0°C until the first conver-sion is complete.

SHUTDOWN MODE (SD)

The Shutdown Mode of the TMP122/TMP124 can be used to shut down all device circuitry except the serial interface.Shutdown mode occurs when the last 8 bits of the WRITE command are equal to 1, and will occur once the current conversion is completed, reducing current consumption to less than 1μA. To take the part out of shutdown, send any command or pattern after the 16-bit read with the last 8 bits not equal to one. Power on default is in active mode.

TABLE III. Pointer Addresses of the TMP122 and TMP124

Registers.

D15D14D13D12D11D10D9D80000D1D0R1R0D7D6D5D4D3D2D1D0F1

POL

TM1

TM0

TABLE VI. Configuration Register.

D15D14D13D12D11D10D9D8T12T11T10T9T8T7T6T5D7D6D5D4D3D2D1D0T4

TABLE IV. Temperature Register.

TMP122, TMP124

SBOS272B

https://www.wendangku.net/doc/423558077.html,

F1F0CONSECUTIVE FAULTS

0010121041

TABLE VIII. Fault Settings of the TMP122 and TMP124.

THERMOSTAT MODE (TM1/TM0)

The Thermostat Mode bits of the TMP122/TMP124 indicate to the device whether to operate in Comparator Mode, Interrupt Mode or Interrupt Comparator Mode. For more information on Comparator and Interrupt Mode, see text HIGH and LOW limit registers. The bit assignments for thermostat mode are described in Table VII. Power on default is comparator mode.

FAULT QUEUE (F1/F0)

A fault condition occurs when the measured temperature exceeds the limits set in the T HIGH and T LOW registers. The Fault Queue is provided to prevent a false alert due to environmental noise and requires consecutive fault mea-surements to trigger the alert function of the TMP122/TMP124.Table VIII defines the number of consecutive faults required to trigger a consecutive alert condition. Power-on default for F1/F0 is 0/0.

HIGH AND LOW LIMIT REGISTERS

In Comparator Mode (TM1/TM0 = 0/0), the ALERT Pin of the TMP122/TMP124 becomes active when the temperature equals or exceeds the value in T HIGH and generates a consecutive number of faults according to fault bits F1 and F0. The ALERT pin will remain active until the temperature falls below the indicated T LOW value for the same number of faults.

In Interrupt Mode (TM1/TM0 = 0/1) the ALERT pin becomes active when the temperature equals or exceeds T HIGH for a consecutive number of fault conditions. The ALERT pin remains active until a read operation of any register occurs.The ALERT pin will also be cleared if the device is placed in Shutdown Mode. Once the ALERT pin is cleared, it will only become active again by the temperature falling below T LOW .When the temperature falls below T LOW , the ALERT pin becomes active and remains active until cleared by a read operation of any register. Once the ALERT pin is cleared, the above cycle will repeat with the ALERT pin becoming active when the temperature equals or exceeds T HIGH .

In Interrupt/Comparator Mode (TM1/TM0 = 1/0), the ALERT Pin of the TMP122/TMP124 becomes active when the tem-perature equals or exceeds the value in T HIGH and generates a consecutive number of faults according to fault bits F1 and F0. The ALERT pin will remain active until the temperature falls below the indicated T LOW value for the same number of faults and a communication with the device has occurred after that point.

Operational modes are represented in Figure 8. Tables IX and X describe the format for the T HIGH and T LOW registers.Power-up reset values for T HIGH and T LOW are: T HIGH = 80°C and T LOW = 75°C. The format of the data for T HIGH and T LOW is the same as for the Temperature Register.

All 13 bits for the Temperature, T HIGH , and T LOW registers are used in the comparisons for the ALERT function for all con-verter resolutions. The three LSBs in T HIGH and T LOW can affect the ALERT output even if the converter is configured for 9-bit resolution.

D15D14D13D12D11D10D9D8H12

H11H10H9H8H7H6H5D7D6D5D4D3D2D1D0H4

TABLE IX. T HIGH Register.

D15D14D13D12D11D10D9D8L12L11L10L9L8L7L6L5D7D6D5D4D3D2D1D0L4

TABLE X. T LOW Register.

FIGURE 8. ALERT Output Transfer Function Diagrams.

TMP122, TMP124

SBOS272B

https://www.wendangku.net/doc/423558077.html,

CONVERSION TIME

R1R0RESOLUTION

(typical)

009 Bits (0.5°C) plus sign 30ms 0110 Bits (0.25°C) plus sign 60ms 1011 Bits (0.125°C) plus sign 120ms 1

12 Bits (0.0625°C) plus sign

240ms

TABLE XI. Resolution of the TMP122 and TMP124.CONVERTER RESOLUTION (R1/R0)

The Converter Resolution Bits control the resolution of the internal Analog-to-Digital (A/D) converter. This allows the user to maximize efficiency by programming for higher resolution or faster conversion time. Table XI identifies the Resolution Bits and the relationship between resolution and conversion time.The TMP122/TMP124 have a default resolution of 12 bits.

DELAY TIME

The Delay Bits control the amount of time delay between each conversion. This feature allows the user to maximize power savings by eliminating unnecessary conversions, and minimiz-ing current consumption. During active conversion the TMP122/TMP124 typically requires 50μA of current for approximately 0.25s conversion time, and approximately 20μA for idle times between conversions. Delay settings are identified in Table XII as conversion time and period, and are shown in Figure 9.Default power up is D1/D0 equal 0/0. Conversion time and conversion periods scale with resolution. Conversion period denotes time between conversion starts.

FIGURE 9. Conversion Time and Period Description.

PARAMETER MIN MAX UNITS SCK Period

t 1100ns Data In to Rising Edge SCK Setup Time t 220

SCK Falling Edge to Output Data Delay t 330

ns SCK Rising Edge to Input Data Hold Time t 420ns CS to Rising Edge SCK Set-Up Time t 540

ns CS to Output Data Delay

t 630ns CS Rising Edge to Output High Impedance

t 7

TABLE XIII. Timing Description.

Timing Diagrams

The TMP122/TMP124 are SPI compatible. Figures 10 to 12describe the various timing parameters of the TMP122/TMP124 with timing definitions in Table XIII.

FIGURE 10. Output Data Timing Diagram.

FIGURE 11. High Impedance Output Timing Diagram.

FIGURE 12. Input Data Timing Diagram.

TMP122, TMP124 10

SBOS272B

https://www.wendangku.net/doc/423558077.html,

PACKAGING INFORMATION

Orderable Device Status (1)Package Type Package Drawing Pins Package Qty Eco Plan (2)

Lead/Ball Finish MSL Peak Temp (3)TMP122AIDBVR ACTIVE SOT-23DBV 63000None CU NIPDAU Level-1-235C-UNLIM TMP122AIDBVT ACTIVE SOT-23DBV 6250None CU NIPDAU Level-1-235C-UNLIM TMP124AID ACTIVE SOIC D 8100Pb-Free (RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-220C-UNLIM TMP124AIDR

ACTIVE

SOIC

2500

Pb-Free (RoHS)

CU NIPDAU

Level-2-260C-1YEAR/Level-1-220C-UNLIM

(1)

The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.

LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.

NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.

PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.

(2)

Eco Plan -May not be currently available -please check https://www.wendangku.net/doc/423558077.html,/productcontent for the latest availability information and additional product content details.

None:Not yet available Lead (Pb-Free).

Pb-Free (RoHS):TI's terms "Lead-Free"or "Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all 6substances,including the requirement that lead not exceed 0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.

Green (RoHS &no Sb/Br):TI defines "Green"to mean "Pb-Free"and in addition,uses package materials that do not contain halogens,including bromine (Br)or antimony (Sb)above 0.1%of total product weight.

(3)

MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications,and peak solder temperature.

Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty

as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.

In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.

PACKAGE OPTION ADDENDUM

https://www.wendangku.net/doc/423558077.html,

9-Dec-2004

Addendum-Page 1

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.

TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. T esting and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed.

TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. T o minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation.

Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:

Products Applications

Amplifiers https://www.wendangku.net/doc/423558077.html, Audio https://www.wendangku.net/doc/423558077.html,/audio

Data Converters https://www.wendangku.net/doc/423558077.html, Automotive https://www.wendangku.net/doc/423558077.html,/automotive

DSP https://www.wendangku.net/doc/423558077.html, Broadband https://www.wendangku.net/doc/423558077.html,/broadband

Interface https://www.wendangku.net/doc/423558077.html, Digital Control https://www.wendangku.net/doc/423558077.html,/digitalcontrol

Logic https://www.wendangku.net/doc/423558077.html, Military https://www.wendangku.net/doc/423558077.html,/military

Power Mgmt https://www.wendangku.net/doc/423558077.html, Optical Networking https://www.wendangku.net/doc/423558077.html,/opticalnetwork Microcontrollers https://www.wendangku.net/doc/423558077.html, Security https://www.wendangku.net/doc/423558077.html,/security

Telephony https://www.wendangku.net/doc/423558077.html,/telephony

Video & Imaging https://www.wendangku.net/doc/423558077.html,/video

Wireless https://www.wendangku.net/doc/423558077.html,/wireless

Mailing Address:Texas Instruments

Post Office Box 655303 Dallas, Texas 75265