1/16
March 2003
STP4NK60Z-STP4NK60ZFP-STB4NK60Z-1STB4NK60Z-STD4NK60Z-STD4NK60Z-1
N-CHANNEL600V-1.76?-4ATO-220/FP/DPAK/IPAK/D 2PAK/I 2PAK
Zener-Protected SuperMESH?Power MOSFET
s TYPICAL R DS (on)=1.76?
s EXTREMELY HIGH dv/dt CAPABILITY s 100%AVALANCHE TESTED s GATE CHARGE MINIMIZED
s VERY LOW INTRINSIC CAPACITANCES s
VERY GOOD MANUFACTURING REPEATIBILITY
DESCRIPTION
The SuperMESH?series is obtained through an extreme optimization of ST’s well established strip-based PowerMESH?layout.In addition to pushing on-resistance significantly down,special care is tak-en to ensure a very good dv/dt capability for the most demanding applications.Such series comple-ments ST full range of high voltage MOSFET s in-cluding revolutionary MDmesh?products.
APPLICATIONS
s HIGH CURRENT,HIGH SPEED SWITCHING s IDEAL FOR OFF-LINE POWER SUPPLIES,ADAPTORS AND PFC s LIGHTING
ORDERING INFORMATION
TYPE V DSS R DS(on)I D Pw STP4NK60Z STP4NK60ZFP STB4NK60Z STB4NK60Z-1STD4NK60Z STD4NK60Z-1
600V 600V 600V 600V 600V 600
V
<2?<2?<2?<2 ?<2?<2?
4A 4A 4A 4A 4A 4A
70W 25W 70W 70W 70W 70W
SALES TYPE MARKING PACKAGE PACKAGING
STP4NK60Z P4NK60Z TO-220TUBE STP4NK60ZFP P4NK60ZFP TO-220FP TUBE STB4NK60ZT4B4NK60Z D 2PAK TAPE &REEL
STB4NK60Z-1B4NK60Z I 2PAK TUBE STD4NK60ZT4D4NK60Z DPAK TAPE &REEL
STD4NK60Z-1
D4NK60Z
IPAK
TUBE
STP4NK60Z,STP4NK60ZFP,STB4NK60Z,STB4NK60Z-1,STD4NK60Z,STD4NK60Z-1
2/16
ABSOLUTE MAXIMUM RATINGS
( )Pulse width limited by safe operating area
(1)I SD ≤4A,di/dt ≤200A/μs,V DD ≤V (BR)DSS ,T j ≤T JMAX.(*)Limited only by maximum temperature allowed
THERMAL DATA
AVALANCHE CHARACTERISTICS
GATE-SOURCE ZENER DIODE
PROTECTION FEATURES OF GATE-TO-SOURCE ZENER DIODES
The built-in back-to-back Zener diodes have specifically been designed to enhance not only the device’s ESD capability,but also to make them safely absorb possible voltage transients that may occasionally be applied from gate to source.In this respect the Zener voltage is appropriate to achieve an efficient and cost-effective intervention to protect the device’s integrity.These integrated Zener diodes thus avoid the usage of external components.
Symbol
Parameter
Value
Unit
STP4NK60Z STB4NK60Z STB4NK60Z-1
STP4NK60ZFP
STD4NK60Z STD4NK60Z-1
V DS Drain-source Voltage (V GS =0)600V V DGR Drain-gate Voltage (R GS =20k ?)600V V GS Gate-source Voltage
±30V I D Drain Current (continuous)at T C =25°C 44(*)4A I D Drain Current (continuous)at T C =100°C 2.5 2.5(*) 2.5A I DM ( )Drain Current (pulsed)1616(*)16A P TOT Total Dissipation at T C =25°C 702570W Derating Factor
0.56
0.20.56
W/°C V ESD(G-S)Gate source ESD(HBM-C=100pF,R=1.5K ?)3000V dv/dt (1)Peak Diode Recovery voltage slope 4.5V/ns V ISO Insulation Withstand Voltage (DC)-2500-V T j T stg
Operating Junction Temperature Storage Temperature
-55to 150-55to 150
°C °C
TO-220D 2PAK I 2PAK
TO-220FP
DPAK IPAK Rthj-case Thermal Resistance Junction-case Max 1.78
5
1.78°C/W Rthj-amb
Thermal Resistance Junction-ambient Max
62.5
100
°C/W T l
Maximum Lead Temperature For Soldering Purpose
300°C
Symbol Parameter
Max Value
Unit I AR Avalanche Current,Repetitive or Not-Repetitive (pulse width limited by T j max)
4A E AS
Single Pulse Avalanche Energy
(starting T j =25°C,I D =I AR ,V DD =50V)
120
mJ
Symbol Parameter
Test Conditions
Min.Typ.
Max.
Unit BV GSO
Gate-Source Breakdown Voltage
Igs=±1mA (Open Drain)
30
V
3/16
STP4NK60Z,STP4NK60ZFP,STB4NK60Z,STB4NK60Z-1,STD4NK60Z,STD4NK60Z-1
ELECTRICAL CHARACTERISTICS (TCASE =25°C UNLESS OTHERWISE SPECIFIED)ON/OFF
DYNAMIC
SWITCHING ON
SWITCHING OFF
SOURCE DRAIN DIODE
Note: 1.Pulsed:Pulse duration =300μs,duty cycle 1.5%.
2.Pulse width limited by safe operating area.
3.C oss eq.is defined as a constant equivalent capacitance giving the same charging time as C oss when V DS increases from 0to 80%V DSS .
Symbol Parameter
Test Conditions
Min.Typ.
Max.
Unit V (BR)DSS Drain-source
Breakdown Voltage I D =1mA,V GS =0
600
V I DSS Zero Gate Voltage
Drain Current (V GS =0)V DS =Max Rating
V DS =Max Rating,T C =125°C 150μA μA I GSS Gate-body Leakage Current (V DS =0)V GS =±20V
±10μA V GS(th)Gate Threshold Voltage V DS =V GS ,I D =50μA 3
3.75
4.5V R DS(on)
Static Drain-source On Resistance
V GS =10V,I D =2A
1.76
2
?
Symbol Parameter
Test Conditions
Min.
Typ.Max.
Unit g fs (1)Forward Transconductance V DS =15V ,I D =2A
3S C iss C oss C rss Input Capacitance Output Capacitance Reverse Transfer Capacitance V DS =25V,f =1MHz,V GS =0
5106713pF pF pF C oss eq.(3)
Equivalent Output Capacitance
V GS =0V,V DS =0V to 480V
38.5
pF
Symbol Parameter
Test Conditions
Min.
Typ.Max.
Unit t d(on)t r Turn-on Delay Time Rise Time
V DD =300V,I D =2A R G =4.7?V GS =10V
(Resistive Load see,Figure 3)129.5ns ns Q g Q gs Q gd
Total Gate Charge Gate-Source Charge Gate-Drain Charge
V DD =480V,I D =4A,V GS =10V
18.83.89.8
26nC nC nC
Symbol Parameter
Test Conditions
Min.
Typ.Max.
Unit t d(off)t f Turn-off Delay Time Fall Time
V DD =300V,I D =2A R G =4.7?V GS =10V
(Resistive Load see,Figure 3)2916.5ns ns t r(Voff)t f t c
Off-voltage Rise Time Fall Time
Cross-over Time
V DD =480V,I D =4A,R G =4.7?,V GS =10V
(Inductive Load see,Figure 5)
121219.5
ns ns ns
Symbol Parameter
Test Conditions
Min.
Typ.
Max.Unit I SD I SDM (2)Source-drain Current
Source-drain Current (pulsed)416A A V SD (1)Forward On Voltage I SD =4A,V GS =0 1.6
V t rr Q rr I RRM
Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current
I SD =4A,di/dt =100A/μs V DD =24V,T j =150°C (see test circuit,Figure 5)
40017008.5
ns nC A
STP4NK60Z,STP4NK60ZFP,STB4NK60Z,STB4NK60Z-1,STD4NK60Z,STD4NK60Z-1
4/16
Output Characteristics
5/16
STP4NK60Z,STP4NK60ZFP,STB4NK60Z,STB4NK60Z-1,STD4NK60Z,STD4NK60Z-1
STP4NK60Z,STP4NK60ZFP,STB4NK60Z,STB4NK60Z-1,STD4NK60Z,STD4NK60Z-1
6/16Normalized BVDSS vs
Temperature Source-drain Diode Forward Characteristics
Maximum Avalanche Energy vs
Temperature
7/16
STP4NK60Z,STP4NK60ZFP,STB4NK60Z,STB4NK60Z-1,STD4NK60Z,STD4NK60Z-1
Fig.5:Test Circuit For Inductive Load Switching And Diode Recovery Times
Fig.4:Gate Charge test Circuit
Fig.2:Unclamped Inductive Waveform
Fig.1:Unclamped Inductive Load Test
Circuit
Fig.3:Switching Times Test Circuit For Resistive
Load
STP4NK60Z,STP4NK60ZFP,STB4NK60Z,STB4NK60Z-1,STD4NK60Z,STD4NK60Z-1
8/16
STP4NK60Z,STP4NK60ZFP,STB4NK60Z,STB4NK60Z-1,STD4NK60Z,STD4NK60Z-1
9/16
STP4NK60Z,STP4NK60ZFP,STB4NK60Z,STB4NK60Z-1,STD4NK60Z,STD4NK60Z-1
10/16
STP4NK60Z,STP4NK60ZFP,STB4NK60Z,STB4NK60Z-1,STD4NK60Z,STD4NK60Z-1
11/16
STP4NK60Z,STP4NK60ZFP,STB4NK60Z,STB4NK60Z-1,STD4NK60Z,STD4NK60Z-1
12/16
13/16
STP4NK60Z,STP4NK60ZFP,STB4NK60Z,STB4NK60Z-1,STD4NK60Z,STD4NK60Z-1
1
STP4NK60Z,STP4NK60ZFP,STB4NK60Z,STB4NK60Z-1,STD4NK60Z,STD4NK60Z-1
14/16
TAPE AND REEL SHIPMENT (suffix ”T4”)*
TUBE SHIPMENT (no suffix)*
D 2PAK FOOTPRINT
*on sales type DIM.mm inch MIN.
MAX.MIN.
MAX.A 330
12.992
B 1.50.059
C 12.813.20.5040.520
D 20.20795G 24.426.40.960 1.039N 100
3.937
T
30.4 1.197
BASE QTY BULK QTY 1000
1000REEL MECHANICAL DATA
DIM.mm inch MIN.MAX.MIN.
MAX.
A010.510.70.4130.421B015.715.90.6180.626D 1.5 1.60.0590.063D1 1.59 1.610.0620.063E 1.65 1.850.0650.073F 11.411.60.4490.456K0 4.8 5.00.1890.197P0 3.9 4.10.1530.161P111.912.10.4680.476P2 1.9 2.1
0.0750.082R 50 1.574
T 0.250.350.00980.0137
W
23.7
24.30.9330.956
TAPE MECHANICAL DATA
15/16
STP4NK60Z,STP4NK60ZFP,STB4NK60Z,STB4NK60Z-1,STD4NK60Z,STD4NK60Z-1
TAPE AND REEL SHIPMENT
(suffix ”T4”)*
TUBE SHIPMENT (no suffix)*
DPAK FOOTPRINT *on sales type
DIM.mm inch MIN.
MAX.MIN.
MAX.A 330
12.992
B 1.50.059
C 12.813.20.5040.520
D 20.20.795G 16.418.40.6450.724N 50
1.968
T
22.40.881
BASE QTY BULK QTY 2500
2500REEL MECHANICAL DATA
DIM.mm inch MIN.MAX.MIN.
MAX.
A0 6.870.2670.275B010.4
10.60.4090.417
B112.10.476
D 1.5 1.6
0.0590.063D1 1.50.059E 1.65 1.850.0650.073F 7.47.60.2910.299K0 2.55 2.750.1000.108P0 3.9 4.10.1530.161P17.98.10.3110.319P2 1.9 2.10.0750.082R 40 1.574W
15.7
16.3
0.618
0.641
TAPE MECHANICAL DATA
All dimensions are in millimeters
All dimensions are in millimeters
STP4NK60Z,STP4NK60ZFP,STB4NK60Z,STB4NK60Z-1,STD4NK60Z,STD4NK60Z-1
16/16Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
? The ST logo is a registered trademark of STMicroelectronics
? 2003 STMicroelectronics - Printed in Italy - All Rights Reserved
STMicroelectronics GROUP OF COMPANIES
Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States.
? https://www.wendangku.net/doc/425152257.html,