VDA-MLA_-_Set_of_Measurement_Criteria_27-07-2015

Applied logic for assessment:

For parts classified as "A" risks (prioritized) the person carrying out the assessment (Producer) and the person receiving the result (Consumer) must assign a traffic-light colour.

In the case of "B" and "C" risk-classified (prioritized) parts the supplier must carry out his own assessment (self-assessment).

In other words, the supplier assesses the fields in which he is producer or consumer, in the same way as for "A" risk-classified (prioritized) parts. However, here no assessment is made by the customer. The result of the assessment is then entered in the column "Overall assessment" automatically (cp. VDA publication "Maturity level assurance for new parts", 2nd revised edition, chapter 3.4.3).

Default for calculation of "Overall assessment" automatically:

Select "Tools" from the menu bar and open "Options".

The pop-up window "Options" appears. Click the "Calculation" tab and select "Automatic". Confirm your entry via the "OK Button".

If automatic calculation in not activated, the "Overall assessment" calculation is carried out by pressing the "F9" key. Deleting the assessment:

Select the field "Producer" and / or "Consumer" and press the "Del" key. This will reset the "Overall assessment".

Office 2010:

Select "File" from the menu bar and open "Options".

The pop-up window "Options" appears. Click "Formulas" and select "Automatic" within "Calculation Options". Confirm your entry via the "OK Button".

If automatic calculation in not activated, the "Overall assessment" calculation is carried out by pressing the "F9" key.Deleting the assessment:Select the field "Producer" and / or "Consumer" and press the "Del" key. This will reset the "Overall assessment".