HT75XX
High Driver Regulator
Selection Table
Part No.Output Voltage
Tolerance
HT7530 3.0V ±5%HT7533 3.3V ±5%HT7536 3.6V ±5%HT7544 4.4V ±5%HT7550 5.0V ±5%HT7580
8.0V
±5%
1May 2,2000
Features
·Low power consumption ·Low voltage drop
·
Low temperature coefficient ·High input voltage (up to 24V)
·High output current :100mA (P d £250mW)·TO-92and SOT-89package
Applications
·Battery-powered equipment ·
Communication equipment
·Audio/Video equipment
General Description
The HT75XX series is a set of three-terminal high current low voltage regulator imple-mented in CMOS technology.They can deliver 100mA output current and allow an input volt-age as high as 24V .They are available with sev-eral fixed output voltages ranging from 3.0V to 8V .CMOS technology ensures low voltage drop and low quiescent current.
Although designed primarily as fixed voltage regulators,these devices can be used with ex-
ternal components to obtain variable voltages and currents.
Block Diagram
Pin Assignment
HT75XX
2May 2,
2000
Pad Assignment Pad Coordinates Unit:m m
Pad No.X Y
1-506.50-589.50
261.00-582.50
3510.50-585.50 Chip size:1390′1530(m m)2
*The IC substrate should be connected to VDD in the PCB layout artwork.
Absolute Maximum Ratings
Supply Voltage...............................-0.3V to26V Storage Temperature.................-50°C to125°C Power Consumption..............................250mW Operating Temperature..................0°C to70°C
Note:These are stress ratings only.Stresses exceeding the range specified under2Absolute Maxi-mum Ratings2may cause substantial damage to the device.Functional operation of this device at other conditions beyond those listed in the specification is not implied and prolonged expo-sure to extreme conditions may affect device reliability.
3May2,2000
Electrical Characteristics
HT7530,+3.0V output type Ta=25°C
HT7533,+3.3V output type Ta=25°C
4May2,2000
HT7544,+4.4V output type Ta=25°C
5May2,2000
HT7580,+8.0V output type Ta=25°C
6May2,2000
Application Circuits
Basic circuit
High output current positive voltage regulator
Short-Circuit protection for Tr1
HT75XX
7May 2,
2000
Circuit for increasing output voltage
V=V(1+R2
R1)+I R2
OUT XX SS Circuit for increasing output voltage
V=V+V
OUT XX D1 Constant current regulator
I=V
R +I
OUT
XX
A
SS
8May2,2000
Dual supply
9May2,2000
10May 2,2000
Copyright ?2000by HOLTEK SEMICONDUCTOR INC.
The information appearing in this Data Sheet is believed to be accurate at the time of publication.However,Holtek assumes no responsibility arising from the use of the specifications described.The applications mentioned herein are used solely for the purpose of illustration and Holtek makes no warranty or representation that such applications will be suitable without further modification,nor recommends the use of its products for application that may pres-ent a risk to human life due to malfunction or otherwise.Holtek reserves the right to alter its products without prior notification.For the most up-to-date information,please visit our web site at https://www.wendangku.net/doc/4a17746376.html,.
Holtek Semiconductor Inc.(Headquarters)
No.3Creation Rd.II,Science-based Industrial Park,Hsinchu,Taiwan,R.O.C.Tel:886-3-563-1999Fax:886-3-563-1189
Holtek Semiconductor Inc.(Taipei Office)
5F,No.576,Sec.7Chung Hsiao E.Rd.,Taipei,Taiwan,R.O.C.Tel:886-2-2782-9635Fax:886-2-2782-9636
Fax:886-2-2782-7128(International sales hotline)
Holtek Semiconductor (Hong Kong)Ltd.
RM.711,Tower 2,Cheung Sha Wan Plaza,833Cheung Sha Wan Rd.,Kowloon,Hong Kong Tel:852-2-745-8288Fax:852-2-742-8657