R-101-E GLASS TUBE FLOWMETER
TG-F783-3E
2 TOKYO KEISO CO., LTD.MODEL CODE
All products : R-101-E
STANDARD MATERIAL
DIMENSION
PRODUCT WEIGHT
ORDERING INFORMATION
Notify the following for order/inquiry;Fluid name Sp.Wt.
Viscosity ■ cP ■Press. ■ Mpa ■Temp. ■ °C ■
Full scale ■ m 3/h ■ m 3/h (nor) ■
Connection size ■ mm ■ inch
Connection rating ■ JIS10RF ■ Rc thread ■Material class
■ 1 (Carbon steel) ■ 2 (SUS304)■ 3 (PVC) ■ 4 (HT.PVC)
Special Instruction, if any
*1: Acryl tapered tube is available on request
*2: Aluminium is used for gas applications as standard *3: EPDM or FPM gaskets available on request *4: Option
*5: SCS13 for 15~25mm
R-101-E GLASS TUBE FLOWMETER
TG-F783-3E TOKYO KEISO CO., LTD. 3
FLOW RATE TABLE
● SUS304 float, Water (Sp.Wt.1.0, Vis.1.0cP)
● PVC, HT.PVC float, Water (Sp.Wt.1.0,Vls.1.0cP)
● SUS304 float, Other than Water
● PVC, HT.PVC float, Other than Water
● Gas measurement with Aluminium float
● Gas measurement with 304SS float
Above table is indicated by flow rate of water. Convert flow rate by the following formula for liquids than water.
: Sp.Wt. of liquid to be measured Above table is indicated by flow rate of water. Convert flow rate by the following formula for liquids than water.
: Sp.Wt. of liquid to be measured
Above table is indicated by flow rate of air at 0°C, 1 atm.Convert flow rate by the following formula for different conditions.
Above table is indicated by flow rate of air at 0°C, 1 atm.Convert flow rate by the following formula for different conditions.
R-101-E GLASS TUBE FLOWMETER
TG-F783-3E
4 TOKYO KEISO CO., LTD.STANDARDIZED ITEM
NE series are ready for quick delivery with standardized specification.Order by Model code only.
Calibration condition :Water, Sp.Wt.1.0, 1.0cP Connection :JIS10KRF flange
Scale Graduation :Double scaled by m 3/h (L/h) and L/min
Press. rating :As per standard R-101-E Temp. rating :As per standard R-101-E Dimension :As per standard R-101-E (Refer to following table)Material Flange
:? Carbon steel
Type NE--S
:? SUS304
Type NE--4
Tapered tube :Pyrex glass Float :SUS304 Seal
:NBR
4 : SUS304
Model code Connection size
*NE-80-50-■ and NE-100-50-■ : L/min graduation is not
available.
*Specification is subject to change without notice.