当前位置：文档库 › Agilent_11713A_datasheet

Agilent_11713A_datasheet

Agilent

11713A Attenuator/Switch Driver Configuration Guide

This configuration guide will help you through the process of configuring a switching system utilizing Agilent’s 11713A attenuator/switch driver. The 11713A is capable of driving up to ten switch or attenuator sections. It drives with steady-state 24 Vdc and is compatible with any switch or attenuator that requires +24 Vdc common, with ground for individual line activations. Switch and attenuator control can be accomplished manually from the front panel push-buttons or automatically over the GPIB interface bus. For applications requiring more than ten pairs of drivelines, multiple 11713A may be used. Each 11713A comes equipped with two plug-in drive cables for driving attenuators. A variety of other cables are also available.

Contact your Agilent representative at the offices listed on the back page of this guide if you need more information.

Cable Drawings Available for

Agilent 11713A Attenuator/

Switch Driver

Part number: 11764-60004

Figure 1. 11764-60004 Viking connector to 10-pin DIP plug

Part number 8120-2703

Figure 2. 8120-2703 Viking to Viking drive cables

Agilent 11761A

8120-2178

Figure 4. 8120-2178 9-pin conductor cable, to Viking connector

(for four switches), 60 inches long

5061-0969

Figure 5. 5061-0969 12-pin conductor cable, bare wire to Viking connector

(for five switches), 60 inches long

Figure 3. 11761A Viking connector to four ribbon cables to connect up to four switches

Compatible Attenuators and Switches

The 11713A attenuator/switch driver is designed to drive the following Agilent attenuators and switches.

Table 2. Compatible Agilent switches

Table 3. Compatible Agilent attenuators

Agilent product number

Table reference

Switch family Cables supplied with switch

8761B 4SPDT NA 8762A/B/C/F 5

SPDT NA 8763A/B/C 5Bypass NA 8764A/B/C 5Bypass NA

8765A/B/C/D/F 6SPDT 33314-60006

87104A/B/C 7Multiport 1253-5524 and 8120-186987204A/B/C 8Multiport 1253-5524 and 8120-186987106A/B/C 9Multiport 1253-5524 and 8120-186987406B 9Matrix 1253-5524 and 8120-186987206A/B/C 10Multiport 1253-5524 and 8120-186987606B 10Matrix 1253-5524 and 8120-1869

8766K, 8767K, 8768K 11Multiport Option 016: 5062-0703 or Option 060: 8120-21788769K 12Multiport Option 016: 5061-0958 or Option 060: 5061-09698767M 13Multiport 11764-60004 (optional)8768M 13Multiport 11764-60004 (optional)8769M 14Multiport 5064-7848 (optional)87222C/D/E 15

Transfer 8120-3308N1811TL, N1812UL

Bypass

N1810TL, N1810UL 16SPDT NA Option 016: 5062-0703 or Option 060: 8120-21788495G/H/K 178494G/H 17Attenuator Attenuator Option 016: 5062-0703 or Option 060: 8120-21788496G/H 17Attenuator Option 016: 5062-0703 or Option 060: 8120-21788497K 17Attenuator Option 016: 5062-0703 or Option 060: 8120-217884904K/L/M 18Attenuator 11764-60004 (optional)84905M

Attenuator 11764-60004 (optional)84906K/L 18Attenuator 11764-60004 (optional)84907K/L 18Attenuator 11764-60004 (optional)84908M

Attenuator

11764-60004 (optional)

Agilent product number

Table reference Attenuator family

Cables suppled with attenuator

Configuration Information for Switches

The 11713A attenuator/switch driver configuration tables designed to drive Agilent switches are listed below.

Table 4. 8761B SPDT switch configuration

Table 5. 8762A/B/C/F SPDT switch, 8763A/B/C and 8764A/B/C bypass switch configuration

Pin number

Wire color Device under test (DUT)

RF connector DC connector OFF S9 A = 24 V, B = 0 V N/A 2 to C connected DUT1<+> connected to S9A ON S9 A = 0 V, B = 24 V N/A 1 to C connected DUT1<-> connected to S9B OFF S0 A = 24 V, B = 0 V N/A 2 to C connected DUT2<+> connected to S0A ON

S0 A = 0 V, B = 24 V

N/A

1 to C connected

DUT2<-> connected to S0B

DUT 2

From 11713A

DUT 18761B switch S9Pin number

Wire color

Device under test (DUT)RF connector Solder terminal 24 Vdc 1red DUT 1 to 4 (shared)C

OFF 5violet 2 to 3 connected, 4 to 5 connected 1

ON 6yellow 1 to 2 connected, 3 to 4 connected 2OFF 7black 2 to 3 connected, 4 to 5 connected 1

ON 8green 1 to 2 connected, 3 to 4 connected 2OFF 9orange 2 to 3 connected, 4 to 5 connected 1

ON 10blue 1 to 2 connected, 3 to 4 connected 2OFF 11brown 2 to 3 connected, 4 to 5 connected 1

ON 12white 1 to 2 connected, 3 to 4 connected 2

24 Vdc 1red DUT 5 to 8 (shared)C

OFF 5violet 2 to 3 connected, 4 to 5 connected 1

ON 6yellow 1 to 2 connected, 3 to 4 connected 2OFF 7black 2 to 3 connected, 4 to 5 connected 1

ON 8green 1 to 2 connected, 3 to 4 connected 2OFF 9orange 2 to 3 connected, 4 to 5 connected 1

ON 10blue 1 to 2 connected, 3 to 4 connected 2OFF 11brown 2 to 3 connected, 4 to 5 connected 1

ON 12

white

1 to

2 connected,

3 to

4 connected 2

Attenuator Y

7DUT 5

DUT 6

DUT 7

DUT 8

8762,3,4 A/B/C Switch and 8762F Switch

Attenuator X

DUT 1

DUT 2

DUT 3

DUT 4

From 11713A

Table 7. 87104A/B/C multiport switch configuration

Pin number Wire color

Device under test

(DUT)RF connector

Option 024Wire color Agilent 33314-60006Option 32424 Vdc 1red DUT 1 to 4 (shared)

Pin 3 and Pin 4 (+V)

red and orange

Terminal 2 and terminal 3

OFF 5violet 2 to C connected 1black 1ON 6yellow 1 to C connected 5yellow 4OFF 7black 2 to C connected 1black 1ON 8green 1 to C connected 5yellow 4OFF 9orange 2 to C connected 1black 1ON 10blue 1 to C connected 5yellow 44OFF 11brown 2 to C connected 1black 1ON 12white 1 to C connected 5

yellow 24 Vdc 1red DUT 5 to 8 (shared)

Pin 3 and Pin 4 (+V)

red and orange

Terminal 2 and terminal 3

white

1 to C connected 5

yellow

DUT 4DUT 5DUT 6DUT 8

DUT 7Attenuator Y

456

From 11713A

DUT 1DUT 2Attenuator X

8765A/B/C/D/F switch 12

3DUT 3Pin number Wire color Device under test (DUT)

RF connector

Pin number Wire color

Agilent 8120-1869 and 1253-5524

24 Vdc 1red 1brown Gnd 2white/brown 15green 1OFF 5violet Port 13orange 2OFF 7black Port 25green 3OFF 9orange Port 37violet 4

OFF 11brown Port 4

9white 24 Vdc 1red 1brown Gnd 2white/brown 15green 5OFF 5violet Port 13orange 6OFF 7black Port 25green 7OFF 9orange Port 37violet 8

OFF

brown

Port 4

white

DUT 2

DUT 1

87104A/B/C switch Attenuator Y

From 11713A

Attenuator X

Table 9. 87106A/B/C multiport switch and 87406B matrix switch configuration

Pin number

Pin number Wire color Device under

test (DUT)RF connector

Wire color

Agilent 8120-1869 and 1253-5524

24 Vdc 1red 1brown Gnd 2white/brown

15green OFF 5violet 3orange ON 6yellow 4yellow OFF 7black 5green ON 8green 6blue OFF 9orange 7violet ON 10blue 8gray OFF 11brown 9white ON 12white 10black 24 Vdc 1red 1brown Gnd 2white/brown

15green OFF 5violet 3orange ON 6yellow 4yellow OFF 7black 5green ON 8green 6blue OFF 9orange 7violet ON 10blue 8gray OFF 11brown 9white ON

white

black

Attenuator Y

6DUT 2

Port 1

Port 2Port 3Port 4

3Port 1

Port 2Port 34

Port 4

From 11713A

87204A/B/C switch

Attenuator X

DUT 1

2Pin number

Pin number Wire color

Device under

test (DUT)RF connector

Wire color Agilent 8120-1869 and 1253-5524

24 Vdc 1red 1brown Gnd 2white/brown 15green 1OFF 5violet Port 13orange 2OFF 7black

Port 25green 3OFF 9orange Port 37violet 4

OFF 11brown

Port 4

9white 24 Vdc 1red

1brown Gnd 2white/brown 15green 5OFF 5violet

Port 511brown 6

OFF

black

Port 6

orange

Note: Need two cables from 11713A in order to drive one 6-port multiport.

DUT 1

Attenuator X

Shared (port 1 to 4)

DUT 1

Attenuator Y

From 11713A

87106A/B/C and 87406B switch

Shared (port 5 to 6)

Table 10. 87206A/B/C multiport switch and 87606B matrix switch configuration

Table 11. 8766K, 8767K, 8768K multiport switch configuration

Pin number

Pin number Wire color Device under test

(DUT)RF connector Wire color

Agilent 8120-1869 and 1253-5524

24 Vdc 1red

1brown Gnd 2white/brown 15green OFF 5violet 3orange ON 6yellow 4yellow OFF 7black 5green ON 8green 6blue OFF 9orange 7violet ON 10blue 8gray OFF 11brown 9white ON 12white 10black 24 Vdc 1red

1brown Gnd 2white/brown 15green OFF 5violet 11brown ON 6yellow 12red OFF 7black 13orange ON

green

yellow

Note: Need two cables from 11713A in order to drive one 6-port multiport.

Shared (port 5 to 6)

DUT 1

Port 4

Port 5

Port 6

Shared

(port 1 to 4)

Port 1Port 2

Port 3Attenuator X

Attenuator Y

87206A/B/C and 87606B switch

From 11713A

23Option 0168766K 8767K

8768K Pin

number Wire color DIP pin number Agilent 5062-0703Viking cable Agilent 8120-2178Wire color

RF connector RF connector

RF connector

OFF 5violet 135violet ON 6yellow 26yellow Common to 1, the rest OFF Common to 3, the rest OFF Common to 4, the rest OFF OFF 7black 117black ON 8green 58green Common to 2, the rest OFF

Common to 1, the rest OFF Common to 2, the rest OFF OFF 9orange 39orange ON 10blue 910blue

Common to 2, the rest OFF Common to 3, the rest OFF

OFF 11brown 411brown

ON 12white 1012white Common to 1, the rest OFF

24 Vdc

1red 61red

All OFF is Common to 3

All OFF is Common to 4

All OFF is Common to 5

Attenuator X

Switch option

From 11713A

Agilent product number

Option 060

Table 12. 8769K multiport switch configuration

Table 13. 8767M, 8768M multiport switch configuration (with optional cable 11764-60004)

Table 14. 8769M multiport switch configuration (with optional cable 5064-7848)

Agilent product number

Option 016

8769K Pin number

DIP pin number Agilent 5061-0958Viking cable Agilent 5061-0969

Wire color Wire color RF connector OFF 5

violet violet ON 6yellow yellow Common to 4, the rest OFF OFF 7black black ON

8green green Common to 2, the rest OFF OFF 9orange orange ON 10blue blue Common to 3, the rest OFF OFF 11brown brown ON 12white white Common to 1, the rest OFF OFF 4violet grey ON

3yellow white/red Common to 5, the rest OFF Attenuator X/Y 24 Vdc

red

All OFF is Common to 6

Attenuator X

Option 060

From 11713A

Switch optio n

56789101112431

13211539410786

8767M 8768M Pin number

RF connector RF connector OFF 5ON 6Common to 3, the rest OFF Common to 4, the rest OFF OFF 7ON 8Common to 1, the rest OFF Common to 2, the rest OFF OFF 9ON 10Common to 2, the rest OFF

Common to 3, the rest OFF OFF 11ON 12Common to 1, the rest OFF

24 Vdc

All OFF is Common to 4

All OFF is Common to 6

From 11713A

Agilent product number Attenuator X

Agilent product number

8769M

Pin number

RF connector OFF

5ON 6Common to 4, the rest OFF OFF 7ON 8Common to 2, the rest OFF OFF 9ON 10Common to 3, the rest OFF OFF 11ON 12Common to 1, the rest OFF OFF 4ON 3Common to 5, the rest OFF 24 Vdc

All OFF is Common to 6

From 11713A

Attenuator X

Table 15. 87222C/D/E transfer switch configuration

Table 16. N1811TL and N1812UL bypass switch and N1810UL and N1810TL SPDT switch configuration

Pin number

Wire color

Device under test

(DUT)

RF connector

Pin number Wire color Agilent 8120-3308

24 Vdc 1red

1brown Gnd 2white/brown

9white OFF 5violet

Drive A (1 to 2, 3 to 4)3orange ON 6yellow Drive B (1 to 4, 2 to 3)5green OFF 7black

Drive A (1 to 2, 3 to 4)3orange ON 8green Drive B (1 to 4, 2 to 3)5green OFF 9orange

Drive A (1 to 2, 3 to 4)3orange ON 10blue Drive B (1 to 4, 2 to 3)5green OFF 11brown

Drive A (1 to 2, 3 to 4)3orange ON 12white Drive B (1 to 4, 2 to 3)

5green 24 Vdc 1red

1brown Gnd 2white/brown

9white OFF 5violet

Drive A (1 to 2, 3 to 4)3orange ON 6yellow Drive B (1 to 4, 2 to 3)5green OFF 7black

Drive A (1 to 2, 3 to 4)3orange ON 8green Drive B (1 to 4, 2 to 3)5green OFF 9orange

Drive A (1 to 2, 3 to 4)3orange ON 10blue Drive B (1 to 4, 2 to 3)5green OFF 11brown

Drive A (1 to 2, 3 to 4)3orange ON

white

Drive B (1 to 4, 2 to 3)

green

Attenuator X

DUT 7

76DUT 8

DUT 5

DUT 6

87222C/D/E switch shared DUT 1 to 4

DUT 1

DUT 2

DUT 3

DUT 4

From 11713A

234

shared DUT 5 to 8

Attenuator Y

Pin number

Wire color Device under test

(DUT)Option 201Option 202

24 Vdc 1red DUT 1 to 4 (shared)

Pin 5 (+V)+V OFF 5violet Pin 4 (A)A ON 6yellow Pin 3 (B)B OFF 7black Pin 4 (A)A ON 8green Pin 3 (B)B OFF 9orange Pin 4 (A)A ON 10blue Pin 3 (B)B OFF 11brown Pin 4 (A)A ON 12white Pin 3 (B)B 24 Vdc 1red DUT 5 to 8 (shared)

Pin 5 (+V)+V OFF 5violet Pin 4 (A)A ON 6yellow Pin 3 (B)B OFF 7black Pin 4 (A)A ON 8green Pin 3 (B)B OFF 9orange Pin 4 (A)A ON 10blue Pin 3 (B)B OFF 11brown Pin 4 (A)A ON

white

Pin 3 (B)

From 11713A

N1811TL, N1812UL, N1810UL and N1810TL Switch Attenuator Y

DUT 5DUT 6DUT 7DUT 8

Attenuator X

5DUT 1DUT 2DUT 3DUT 4

Configuration Information for Attenuators

The 11713A attenuator/switch driver configuration tables designed to drive Agilent Technologies attenuators are listed below.

Table 17. 8494G/H and 8495G/H/K and 8496G/H and 8497K attenuator configuration

Table 18. 84904K/L/M and 84905M and 84906K/L and 84907K/L, and 84908M attenuator configuration (with optional cable 11764-60004)

Option 016

8494G/H 8495G/H 8496G/H 8495K

8497K Pin number Wire color Wire color DIP pin number Agilent 5062-0703Viking cable Agilent 8120-2178

OFF

5violet 135violet 0 dB 0 dB 0 dB 0 dB

0 dB ON 6yellow 26yellow 1 dB 10 dB 10 dB 10 dB 10 dB OFF 7black 117black 0 dB 0 dB 0 dB 0 dB 0 dB ON 8green 58green 2 dB 20 dB 20 dB 20 dB 20 dB OFF 9orange 39orange 0 dB 0 dB 0 dB 0 dB 0 dB ON 10blue 910blue 4 dB 40 dB 40 dB 20 dB 30 dB OFF 11brown 411brown 0 dB –0 dB 0 dB 0 dB ON 12white 1012white 4 dB ––

––

–

––

40 dB 20 dB 30 dB 24 Vdc

red

Attenuator X

Attenuator option

From 11713A

Agilent product number

Attenuation Option 06084904K/L/M 84905M 84906K/L 84907K/L

84908M

number

Viking cable Agilent 11764-60004

(optional)

OFF 550 dB 0 dB 0 dB 0 dB

0 dB ON 66 1 dB 10 dB 10 dB 10 dB 5 dB OFF 770 dB 0 dB 0 dB 0 dB 0 dB ON 88 2 dB 20 dB 20 dB 20 dB 10 dB OFF 990 dB 0 dB 0 dB 0 dB 0 dB ON 1010 4 dB 30 dB 30 dB 40 dB 20 dB OFF 11110 dB 0 dB 0 dB ON 1212 4 dB 30 dB 30 dB 24 Vdc

From 11713A

Agilent product number Attenuation Attenuator X

––––

–

––––

Web Resources

For more information about Agilent’s RF and microwave test accessories, visit:

https://www.wendangku.net/doc/5311457564.html,/find/mta

For additional information about Agilent’s service and support products, visit:

https://www.wendangku.net/doc/5311457564.html,/find/tm_services

https://www.wendangku.net/doc/5311457564.html,

Agilent T echnologies’ T est and Measurement Support, Services, and Assistance Agilent T echnologies aims to maximize the value you receive, while minimizing your risk and problems. We strive to ensure that you get the test and measure-ment capabilities you paid for and obtain the support you need. Our extensive support resources and services can help you choose the right Agilent products for your applications and apply them successfully. Every instrument and system we sell has a global warranty. T wo concepts underlie Agilent’s overall support policy: “Our Promise” and “Your Advantage.”

Our Promise

Our Promise means your Agilent test and measurement equipment will meet its advertised performance and functionality. When you are choosing new equipment, we will help you with product information, including realistic perfor-mance specifications and practical recommendations from experienced test engineers. When you receive your new Agilent equipment, we can help verify that it works properly and help with initial product operation.

Your Advantage

Your Advantage means that Agilent offers a wide range of additional expert test and measurement services, which you can purchase according to your unique technical and business needs. Solve problems efficiently and gain a competitive edge by contracting with us for calibration, extra-cost upgrades, out-of-warranty repairs, and onsite education and training, as well as design, system integration,project management, and other professional engineering services. Experienced Agilent engineers and technicians worldwide can help you maximize your produc-tivity, optimize the return on investment of your Agilent instruments and systems,and obtain dependable measurement accuracy for the life of those products.

United States:Korea:

(tel) 800 829 4444(tel) (080) 769 0800(fax) 800 829 4433(fax) (080) 769 0900Canada:

Latin America:(tel) 877 894 4414(tel) (305) 269 7500(fax) 800 746 4866Taiwan :

China:

(tel) 0800 047 866(tel) 800 810 0189(fax) 0800 286 331(fax) 800 820 2816Other Asia Pacific Europe:

Countries:

(tel) 31 20 547 2111(tel) (65) 6375 8100Japan:

(fax) (65) 6755 0042

(tel) (81) 426 56 7832Email: tm_ap@https://www.wendangku.net/doc/5311457564.html,

(fax) (81) 426 56 7840

Contacts revised: 09/26/05

For more information on Agilent Technologies’ products, applications or services,please contact your local Agilent office. The complete list is available at:

https://www.wendangku.net/doc/5311457564.html,/find/contactus

Product specifications and descriptions in this document subject to change without notice.

? Agilent Technologies, Inc. 2005Printed in USA, October 27, 20055989-3703EN

https://www.wendangku.net/doc/5311457564.html,/find/emailupdates

Get the latest information on the products and applications you select.

Agilent Email Updates

https://www.wendangku.net/doc/5311457564.html,/find/agilentdirect

Quickly choose and use your test equipment solutions with confidence.

Agilent Direct

Agilent Open

https://www.wendangku.net/doc/5311457564.html,/find/open

Agilent Open simplifies the process of connecting and programming test systems to help engineers design, validate and manufacture electronic products. Agilent offers open connectivity for a broad range of system-ready instruments, open industry software, PC-standard I/O and global support, which are combined to more easily integrate test system development.