文档库 最新最全的文档下载
当前位置:文档库 › CCL450DK1-TTD2中文资料

CCL450DK1-TTD2中文资料

CCL450DK1-TTD2中文资料
CCL450DK1-TTD2中文资料

ACCESSORIES

LMSHELF = Mounting Shelf 300-450W MXSHELF = Mounting Shelf 72-200W

Ordering Information

SERIES DC WATTAGE HEADS HEADS OPTIONS 1CCL = 6 Volt 6 Volt

6 Volt

3 = Three A = Ammeter 2

TCL = 12 Volt

75 = 75 Watts DY = 8 Watt, Tungsten 2 = Two ACF1 = 120 VAC Fuse 100 = 100 Watts DA = 18 Watt, Tungsten 1 = One

ACF2 = 277 VAC Fuse 150 = 150 Watts DL = 25 Watt, Tungsten ACP1 = 120 VAC Power Switch 225 = 225 Watts

DC = 30 Watt, Tungsten ACP2 = 277 VAC Power Switch AD = ACCU-TEST Self-Diagnostics 12 Volt (Includes standard voltmeter)12 Volt

ADAL = ACCU-TEST with Alarm

150 = 150 Watt DNY = 12 Watt, Tungsten ADTD = ACCU-TEST with Time Delay 3200 = 200 Watt DE = 28 Watt, Tungsten DCP = DC Power Switch

300 = 300 Watt DK = 25 Watt, Tungsten EX = Special Input Transformer (Specify voltage and frequency)450 = 450 Watt

DG = 30 Watt, Tungsten

TD1 = 120 VAC Time Delay 3TTD2 = 277 VAC Time Delay 3(Suggested lamp heads listed

V = Voltmeter 2

above. Refer to the Accessories Section for W = White Housing

additional lamp head choices.)

CCL

150

16.0”

(40.6 cm)

TCL300, TCL450

6.0”

(15.2 cm)

7.6”

(19.3 cm)

12.0”

(30.5 cm)

27.0”

(12.7 cm)

6.0”

(15.2 cm)

7.6”

(19.3 cm)

12.0”

(30.5 cm)

Notes:

1) Some option combinations may impact UL list-ing. consult factory for specifics.

2) Not available witj AD, ADAL, or ADTD options.3) 15 minute delay.

元器件交易网https://www.wendangku.net/doc/5312809830.html,

Housing

18 gauge steel housing with a tan epoxy powder coat finish.

Knockouts provided for mounting up to three lamp heads.

The suggested lamp head is the “D” Series round sealed beam Par 36 tungsten. To order lamp heads other than the suggested “D” head, refer to Chloride Accessories Section..

Suggested Specification

Furnish and install Chloride Systems emergency lighting unit model ________. The unit shall be constructed to meet Underwriter’s Laboratories, Inc. Standard #924

and the National Electrical Code (NEC).

INSTALLATION AND OPERATION -Unit shall be easily field connected to a 120 or 277 VAC, 60 hertz, unswitched power source. Installation must comply with the NEC as well as other applicable codes. Upon utility power failure or brownout, the unit shall automatically transfer to battery power and maintain the required illumina-tion level for a minimum period of 90 minutes. Upon restoration of utility power, the charger shall restore the battery to full charge within UL 924 requirements follow-ing a rated discharge of not more than 90 minutes.

CHARGER -Product shall utilize a fully automatic, voltage regulated, two-rate current limited solid-state charger. The charging system shall maintain the battery at full capacity without the need for periodic exercising or equalization. The following features shall be standard: Low voltage disconnect (LVD), brownout protection and AC lockout.

BATTERY -The battery shall be a low maintenance, free electrolyte, wet cell, lead calcium battery. The lead calcium battery shall provide trouble-free operation in temperatures up to 85°F (30°C).

HOUSING -The unit housing shall be constructed of 18 gauge steel with a tan epoxy powder coat finish.

Chloride Systems

ISO

8C1063R49/02 IH

272 West Stag Park Service Road ?Burgaw NC 28425Telephone: (910) 259 1000 ?Facsimile: (800) 258 https://www.wendangku.net/doc/5312809830.html,

Lamp Head Photometrics

(For DL, suggested head for CCL)

(For DK, suggested head for TCL)

Vertical

203050100Up 20

10

feet 0

10

Down 20

.2

.1

406070

.3

1

.5

Horizontal

203050100Left 20

10

feet 0

10

Right 20

.2

.1

4060

70

.3

1

.5

203050100Up 20

10

feet 0

10

Down 20

Photometric No. 3

40607080

1

.3

.2

.1

.5

Horizontal

203050100Left 30

10

feet 0

10

20

Right 30

1

.3

.2

.1

20

.5

40607080

相关文档