B32620-A6153中文资料

B32620-A6153中文资料

MKP stacked-film capacitors Smallest possible dimensions Construction

I Dielectric: polypropylene I Stacked-film technology I Plastic case (UL 94 V-0)I

Epoxy resin sealing

Features

I Very high pulse strength

I Very good self-healing properties I Smallest possible dimensions I

High contact reliability

Typical applications

I Energy-saving lamps I TV S-correction

I High pulse load applications I

AC applications

Terminals

I Parallel wire leads, tinned

I Also available with (3,2 ± 0,3) mm lead length

Marking

Manufacturer’s logo,

lot number, style and type (P621) for lead spacing 10 mm,style (MKP) for lead spacing 7,5 mm,rated capacitance (coded),

capacitance tolerance (code letter),rated dc voltage,

date of manufacture (coded)Delivery mode

Bulk (untaped)

Taped (Ammo pack or reel)

For notes on taping, refer to chapter “Taping and packing”, page 274.

Lead spacing

± 7,5B 32620Metallized Polypropylene Film Capacitors (MKP)B 32621

Plastic Case

B32620-A6153中文资料

MKP

Overview of available types Lead spacing 7,5 mm 10 mm Type B 32 620 B 32 621Page 119

121

0,47 nF 1000 V d c 600 V a c

0,68 nF 1,0nF 1,5nF 630 V d c 400 V a c

1000 V d c 500 V a c

2,2nF 250 V d c 140 V a c

630 V d c 400 V a c

1000 V d c 500 V a c

3,3nF 4,7nF 6,8nF 400 V d c 200 V a c

10nF 400 V d c 200 V a c

15nF 22nF 160 V d c 90 V a c

250 V d c 140 V a c

33nF 47nF 160 V d c 90 V a c

68nF 0,10μF 0,15μF 0,22μF

B 32621

B 32620

B32620-A6153中文资料

MKP

Ordering codes and packing units, lead spacing 7,5 mm V R (V rms

f ≤ 1 kHz)C R

Maximum dimensions b × h × l (mm)Ordering code 1)

Packing units (pcs)Ammo pack Reel Untaped 160 Vdc (90 Vac)

22 nF 3,0 × 8,0 × 10,0B32620-A5223-+***26002400200033 nF 4,0 × 8,5 × 10,0B32620-A5333-+***20001800150047 nF 4,0 × 8,5 × 10,0B32620-A5473-+***20001800150068 nF 5,0 × 10,5 × 10,0B32620-A5683-+***1600140010000,10 μF 5,0 × 10,5 × 10,0B32620-A5104-+***1600140010000,15 μF 6,0 × 12,0 × 10,3B32620-A5154-+***13001100 750250 Vdc (140 Vac)

22 nF 4,0 × 8,5 × 10,0B32620-A3223-+***20001800150033 nF 4,0 × 8,5 × 10,0B32620-A3333-+***20001800150047 nF 5,0 × 10,5 × 10,0B32620-A3473-+***16001400100068 nF 5,0 × 10,5 × 10,0B32620-A3683-+***1600140010000,10 μF 6,0 × 12,0 × 10,3B32620-A3104-+***13001100 750400 Vdc (200 Vac)

6,8 nF 4,0 × 8,5 × 10,0B32620-A4682-+***20001800150010 nF 4,0 × 8,5 × 10,0B32620-A4103-+***20001800150015 nF 5,0 × 10,5 × 10,0B32620-A4153-+***16001400100022 nF 5,0 × 10,5 × 10,0B32620-A4223-+***16001400100033 nF 6,0 × 12,0 × 10,3B32620-A4333-+***13001100 750630 Vdc (400 Vac)

1,5 nF 4,0 × 8,5 × 10,0B32620-A6152-+***2000180015002,2 nF 4,0 × 8,5 × 10,0B32620-A6222-+***2000180015003,3 nF 4,0 × 8,5 × 10,0B32620-A6332-+***2000180015004,7 nF 4,0 × 8,5 × 10,0B32620-A6472-+***2000180015006,8 nF 5,0 × 10,5 × 10,0B32620-A6682-+***16001400100010 nF 5,0 × 10,5 × 10,0B32620-A6103-+***16001400100015 nF

6,0 × 12,0 × 10,3

B32620-A6153-+***

1300

1100

750

1)+ Code letter for capacitance tolerance

Capacitance tolerance: ±20 % =? M, ±10 % =? K, ±5 % =? J

B 326207,5

B32620-A6153中文资料

MKP

Capacitance tolerance: ±20 % =? M, ±10 % =? K, ±5 % =? J

1000 Vdc (500 Vac)

1,5 nF 4,0 × 8,5 × 10,0B32620-A152-+***2000180015002,2 nF 4,0 × 8,5 × 10,0B32620-A222-+***2000180015003,3 nF 5,0 × 10,5 × 10,0B32620-A332-+***1600140010004,7 nF 5,0 × 10,5 × 10,0B32620-A472-+***1600140010006,8 nF 6,0 × 12,0 × 10,3B32620-A682-+***13001100 7501000 Vdc (600 Vac)

470 pF 4,0 × 8,5 × 10,0B32620-J471-+***200018001500680 pF 5,0 × 10,5 × 10,0B32620-J681-+***1600140010001,0 nF 5,0 × 10,5 × 10,0B32620-J102-+***1600140010001,5 nF 5,0 × 10,5 × 10,0B32620-J152-+***1600140010002,2 nF 5,0 × 10,5 × 10,0B32620-J222-+***1600140010003,3 nF 5,0 × 10,5 × 10,0B32620-J332-+***1600140010004,7 nF

6,0 × 12,0 × 10,3

B32620-J472-+***

1300

1100

750

Ordering codes and packing units, lead spacing 7,5 mm V R (V rms

f ≤ 1 kHz)C R

Maximum dimensions b × h × l (mm)Ordering code 1)

Packing units (pcs)Ammo pack Reel Untaped 1)+ Code letter for capacitance tolerance

B 32620

7,5

B32620-A6153中文资料

MKP

Capacitance tolerance: ±20 % =? M, ±10 % =? K, ±5 % =? J

Ordering codes and packing units, lead spacing 10 mm V R (V rms

f ≤ 1 kHz)C R

Maximum dimensions b × h × l (mm)Ordering code 1)

Packing units (pcs)Ammo pack Reel Untaped 160 Vdc (90 Vac)

47 nF 4,0 × 7,0 × 13,0B32621-A5473-+***10001700100068 nF 4,0 × 9,0 × 13,0B32621-A5683-+***1000170010000,10 μF 5,0 × 11,0 × 13,0B32621-A5104-+*** 830130010000,15 μF 5,0 × 11,0 × 13,0B32621-A5154-+*** 830130010000,22 μF 6,0 × 12,0 × 13,0B32621-A5224-+*** 68011001000250 Vdc (140 Vac)

2,2 nF 4,0 × 7,0 × 13,0B32621-A3222-+***1000170010003,3 nF 4,0 × 9,0 × 13,0B32621-A3332-+***1000170010004,7 nF 4,0 × 9,0 × 13,0B32621-A3472-+***1000170010006,8 nF 4,0 × 9,0 × 13,0B32621-A3682-+***10001700100010 nF 4,0 × 9,0 × 13,0B32621-A3103-+***10001700100015 nF 4,0 × 9,0 × 13,0B32621-A3153-+***10001700100022 nF 4,0 × 9,0 × 13,0B32621-A3223-+***10001700100033 nF 4,0 × 9,0 × 13,0B32621-A3333-+***10001700100047 nF 4,0 × 9,0 × 13,0B32621-A3473-+***10001700100068 nF 5,0 × 11,0 × 13,0B32621-A3683-+*** 830130010000,10 μF 6,0 × 12,0 × 13,0B32621-A3104-+*** 68011001000400 Vdc (200 Vac)

10 nF 4,0 × 9,0 × 13,0B32621-A4103-+***10001700100015 nF 4,0 × 9,0 × 13,0B32621-A4153-+***10001700100022 nF 5,0 × 11,0 × 13,0B32621-A4223-+*** 8301300100033 nF 5,0 × 11,0 × 13,0B32621-A4333-+*** 8301300100047 nF 6,0 × 12,0 × 13,0B32621-A4473-+*** 68011001000630 Vdc (400 Vac)

2,2 nF 4,0 × 7,0 × 13,0B32621-A6222-+***1000170010003,3 nF 4,0 × 9,0 × 13,0B32621-A6332-+***1000170010004,7 nF 4,0 × 9,0 × 13,0B32621-A6472-+***1000170010006,8 nF 4,0 × 9,0 × 13,0B32621-A6682-+***10001700100010 nF 4,0 × 9,0 × 13,0B32621-A6103-+***10001700100015 nF 5,0 × 11,0 × 13,0B32621-A6153-+*** 8301300100022 nF 6,0 × 12,0 × 13,0B32621-A6223-+*** 6801100100033 nF 6,0 × 12,0 × 13,0B32621-A6333-+*** 680110010001000 Vdc (500 Vac)

2,2 nF 4,0 × 7,0 × 13,0B32621-A222-+***1000170010003,3 nF 4,0 × 9,0 × 13,0B32621-A332-+***1000170010004,7 nF 4,0 × 9,0 × 13,0B32621-A472-+***1000170010006,8 nF 5,0 × 11,0 × 13,0B32621-A682-+*** 8301300100010 nF

6,0 × 12,0 × 13,0

B32621-A103-+***

680

1100

1000

1)+ Code letter for capacitance tolerance

B 3262110

B32620-A6153中文资料

MKP

Technical data Climatic category

in accordance with IEC 60068-155/100/56

Lower category temperature T min Upper category temperature T max ? 55 °C + 100 °C

Damp heat test 56 days/40 °C/93% relative humidity

Limit values after damp heat test

Capacitance change |?C /C | ≤ 3 %

Dissipation factor change ? tan δ ≤ 0,5 ? 10?3 (at 1 kHz)

≤ 1,0 ? 10?3 (at 10 kHz)

Insulation resistance R is ≥ 50 % of minimum

as-delivered values Reliability:

Reference conditions Failure rate

0,5 ? V R ; 40 °C 1 ? 10?9/h = 1 fit

For a conversion table for other operating conditions and tem-peratures, refer to chapter “Quality assurance”, page 327.

Service life

200 000 h

Failure criteria:Total failure

Failure due to variation of parameters Short circuit or open circuit Capacitance change |?C /C |> ±10 %

Dissipation factor tan δ 4 ? upper limit values Insulation resistance R is < 1500 M ?

DC test voltage

1,6 ? V R , 2 s

Category voltage V C

Operation with dc voltage or ac voltage V rms up to 1 kHz T ≤ 85 °C: V C = 1,0 ? V R or 1,0 ? V rms T = 100 °C: V C = 0,7 ? V R or 0,7 ? V rms

Dissipation factor tan δ (in 10?3)at 20 °C

(upper limit values)

Insulation resistance R is

or time constant τ = C R ? R is at 20 °C, rel. humidity ≤ 65 % (minimum as-delivered values)

100 G ?

C R ≤ 0,1 μF

0,1 μF < C R ≤ 0,22 μF at

1 kHz –1,010 kHz –1,5100 kHz

4,0

B 32621

B 32620

B32620-A6153中文资料

MKP

B32620-A6153中文资料

Pulse handling capability

Maximum permissible voltage change per unit of time for non-sinusoidal voltages (pulse, sawtooth)For V pp < V R , the permissible voltage rise rate value V pp /τ may be multiplied by the factor V R /V pp .Also refer to the calculation example in chapter “General technical information”, page 302.V R

Max. rate of voltage rise V pp /τ in V/μs (for V pp = V R )Lead spacing 7,5 mm

10 mm 160 Vdc 750 600 250 Vdc 1200 900 400 Vdc 15001050 630 Vdc

270018001000 Vdc (500 Vac)32002400

1000 Vdc (600 Vac)

4000

?

V R

Pulse characteristic k 0 in V 2/μs (for V pp ≤ V R )Lead spacing 7,5 mm

10 mm 160 Vdc 240 000 190 000 250 Vdc 600 000 450 000 400 Vdc 1 200 000 840 000 630 Vdc

3 400 000 2 250 000B 32621

B 32620

B32620-A6153中文资料

MKP

Permissible ac voltage V rms versus frequency f Lead spacing 7,5 mm 160 Vdc /90 Vac

B32620-A6153中文资料

B32620-A6153中文资料

250 Vdc /140 Vac 400 Vdc /200 Vac 630 Vdc /400 Vac

B 32620

7,5

B32620-A6153中文资料

B32620-A6153中文资料

B32620-A6153中文资料

MKP

Permissible ac voltage V rms versus frequency f Lead spacing 7,5 mm 1000 Vdc/500 Vac

1000 Vdc/600 Vac

B 326207,5

B32620-A6153中文资料

B32620-A6153中文资料

B32620-A6153中文资料

MKP

Permissible ac voltage V rms versus frequency f Lead spacing 10 mm 160 Vdc /90 Vac

250 Vdc /140 Vac

B32620-A6153中文资料

B32620-A6153中文资料

400 Vdc /200 Vac

630 Vdc /400 Vac

B 32621

10

B32620-A6153中文资料

B32620-A6153中文资料

B32620-A6153中文资料

MKP

Permissible ac voltage V rms versus frequency f Lead spacing 10 mm 1000 Vdc /500 Vac

B32620-A6153中文资料

B 3262110

B32620-A6153中文资料

MKP Sinus-wave application, lighting

Permissible voltage and current / waveform

B32620-A6153中文资料

B 32621

B 32620

B32620-A6153中文资料

MKP

Sinus-wave application, lighting

Permissible current I pp versus rated capacaitance C R Lead spacing 7,5 mm 160 Vdc/90 Vac

250 Vdc/140 Vac

B32620-A6153中文资料

B32620-A6153中文资料

400 Vdc/200 Vac

630 Vdc/400 Vac

B 326207,5

B32620-A6153中文资料

B32620-A6153中文资料

B32620-A6153中文资料

MKP Sinus-wave application, lighting

Permissible current I pp versus rated capacaitance C R Lead spacing 7,5 mm Lead spacing 10 mm

B32620-A6153中文资料

B32620-A6153中文资料

B32620-A6153中文资料

B32620-A6153中文资料

B 32621

B 326207,510

B32620-A6153中文资料

MKP

Sinus-wave application, lighting

Permissible current I pp versus rated capacaitance C R Lead spacing 10 mm 400 Vdc/200 Vac

630 Vdc/400 Vac

B32620-A6153中文资料

B32620-A6153中文资料

B 3262110

B32620-A6153中文资料

Herausgegeben von EPCOS AG

Marketing Kommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND

EPCOS AG 2000. Alle Rechte vorbehalten. Vervielf?ltigung, Ver?ffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet.

Mit den Angaben in dieser Broschüre werden die Bauelemente spezifiziert, keine Eigenschaften zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird. Diese Broschüre ersetzt die vorige Ausgabe.

Fragen über Technik, Preise und Lieferm?glichkeiten richten Sie bitte an den Ihnen n?chstgele-genen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente k?nnen aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zust?ndige Vertriebsge-sellschaft einzuholen.

Published by EPCOS AG

Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY

EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this bro-chure and the information contained therein without EPCOS’ prior express consent is prohibited. The information contained in this brochure describes the type of component and shall not be con-sidered as guaranteed characteristics. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition.

For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives.

Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.

相关推荐
相关主题
热门推荐