19-137_R6GHBHC-A01_2T
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
0.5mm Height Chip LED with Full Color 19-137/R6GHBHC-A01/2T
Features
Package in 8mm tape on 7〞diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Full-color type. Pb-free. ESD protection The product itself will remain within RoHS compliant version.
Descriptions
The 19-137 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc.
Applications
Backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use.
Device Selection Guide
Chip Type R6 GH BH Material AlGaInP InGaN InGaN Emitted Color Brilliant Red Brilliant Green Blue Water Clear
Lens Color
Everlight Electronics Co., Ltd. Device No. : DSE-137-A01
https://www.wendangku.net/doc/5413428010.html, Prepared date: 06-Apr-2006
Rev. 1
Page: 1 of 12
Prepared by : Alex Chen
EVERLIGHT ELECTRONICS CO.,LTD.
19-137/R6GHBHC-A01/2T
Package Outline Dimensions
1.6
G
2 1.6 1 3 4 Anode mark 1.1 1.0
B
R
0.8 1 0.55 4 0.55
1
4 0.35
0.55
2
3
0.55
2
0.8 2.4
3
Note: The tolerance unless mentioned is ±0.1mm,unit is mm.
Everlight Electronics Co., Ltd. Device No. : DSE-137-A01
https://www.wendangku.net/doc/5413428010.html, Prepared date: 06-Apr-2006
Rev. 1
Page: 2 of 12
Prepared by : Alex Chen
EVERLIGHT ELECTRONICS CO.,LTD.
19-137/R6GHBHC-A01/2T
Absolute Maximum Ratings (Ta=25℃)
Parameter Reverse Voltage Symbol VR Rating 5 R6:25 Forward Current IF GH:25 BH:25 Operating Temperature Storage Temperature Electrostatic Discharge(HBM) Topr Tstg ESD -40 ~ +85 -40 ~ +90 2000 R6:60 Power Dissipation Pd GH:110 BH:110 Peak Forward Current (Duty 1/10 @1KHz) R6:60 IFP GH:100 BH:100 Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. mA mW ℃ ℃ V mA Unit V
Soldering Temperature
Everlight Electronics Co., Ltd. Device No. : DSE-137-A01
https://www.wendangku.net/doc/5413428010.html, Prepared date: 06-Apr-2006
Rev. 1
Page: 3 of 12
Prepared by : Alex Chen
EVERLIGHT ELECTRONICS CO.,LTD.
19-137/R6GHBHC-A01/2T
Electro-Optical Characteristics (Ta=25℃)
Parameter Symbol R6
Luminous Intensity
Iv GH BH
Min. 72 112 28.5 -----
Typ. 100 180 50 120 632
Max.
Unit
Condition
-----
mcd
Viewing Angle
2θ1/2
R6
-----
deg
Peak Wavelength
λp
GH BH R6
-----
518 468 624
-----
nm
Dominant Wavelength
λd
GH BH R6
-----
525 470 20
-----
nm
IF=20mA
Spectrum Radiation Bandwidth
△λ GH
BH R6
-----
35 35
-----
nm
1.7 2.7 2.7 -----
2.0 3.3 3.3 -----
2.4 3.7 3.7 10 NA NA μA VR=5V V
Forward Voltage
VF
GH BH R6
Reverse Current
IR
GH BH
Notes:
1.Tolerance of Luminous Intensity ±10%
Everlight Electronics Co., Ltd. Device No. : DSE-137-A01
https://www.wendangku.net/doc/5413428010.html, Prepared date: 06-Apr-2006
Rev. 1
Page: 4 of 12
Prepared by : Alex Chen
EVERLIGHT ELECTRONICS CO.,LTD.
19-137/R6GHBHC-A01/2T
Typical Electro-Optical Characteristics Curves
R6
Everlight Electronics Co., Ltd. Device No. : DSE-137-A01
https://www.wendangku.net/doc/5413428010.html, Prepared date: 06-Apr-2006
Rev. 1
Page: 5 of 12
Prepared by : Alex Chen
EVERLIGHT ELECTRONICS CO.,LTD.
19-137/R6GHBHC-A01/2T
Typical Electro-Optical Characteristics Curves
GH
Everlight Electronics Co., Ltd. Device No. : DSE-137-A01
https://www.wendangku.net/doc/5413428010.html, Prepared date: 06-Apr-2006
Rev. 1
Page: 6 of 12
Prepared by : Alex Chen
EVERLIGHT ELECTRONICS CO.,LTD.
19-137/R6GHBHC-A01/2T
Typical Electro-Optical Characteristics Curves
BH
Everlight Electronics Co., Ltd. Device No. : DSE-137-A01
https://www.wendangku.net/doc/5413428010.html, Prepared date: 06-Apr-2006
Rev. 1
Page: 7 of 12
Prepared by : Alex Chen
EVERLIGHT ELECTRONICS CO.,LTD.
19-137/R6GHBHC-A01/2T
Label explanation
CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerance unless mentioned is ±0.1mm,unit is mm.
Everlight Electronics Co., Ltd. Device No. : DSE-137-A01 https://www.wendangku.net/doc/5413428010.html, Prepared date: 06-Apr-2006 Rev. 1 Page: 8 of 12
Prepared by : Alex Chen
EVERLIGHT ELECTRONICS CO.,LTD.
19-137/R6GHBHC-A01/2T
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Note: The tolerance unless mentioned is ±0.1mm ,unit is mm.
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd. Device No. : DSE-137-A01
https://www.wendangku.net/doc/5413428010.html, Prepared date: 06-Apr-2006
Rev. 1
Page: 9 of 12
Prepared by : Alex Chen
EVERLIGHT ELECTRONICS CO.,LTD.
19-137/R6GHBHC-A01/2T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10%
No. 1
Items Reflow Soldering
Test Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Temp. : 100℃ Temp. : -40℃ IF = 20 mA 85℃/ 85% RH
Test Sample Hours/Cycles Size 6 Min. 300 Cycles 22 PCS.
Ac/Re 0/1
2
Temperature Cycle
22 PCS.
0/1
3
Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity
300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs.
22 PCS.
0/1
4 5 6 7
22 PCS. 22 PCS. 22 PCS. 22 PCS.
0/1 0/1 0/1 0/1
Everlight Electronics Co., Ltd. Device No. : DSE-137-A01
https://www.wendangku.net/doc/5413428010.html, Prepared date: 06-Apr-2006
Rev. 1
Page: 10 of 12
Prepared by : Alex Chen
EVERLIGHT ELECTRONICS CO.,LTD.
19-137/R6GHBHC-A01/2T
Precautions For Use
1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd. Device No. : DSE-137-A01
https://www.wendangku.net/doc/5413428010.html, Prepared date: 06-Apr-2006
Rev. 1
Page: 11 of 12
Prepared by : Alex Chen
EVERLIGHT ELECTRONICS CO.,LTD.
19-137/R6GHBHC-A01/2T
4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 https://www.wendangku.net/doc/5413428010.html,
Everlight Electronics Co., Ltd. Device No. : DSE-137-A01
https://www.wendangku.net/doc/5413428010.html, Prepared date: 06-Apr-2006
Rev. 1
Page: 12 of 12
Prepared by : Alex Chen