Product Characteristics Resistance Range
Bussed...................49.9 to 100K ohms Isolated......................20 to 200K ohms Series.........................20 to 100K ohms Resistance Tolerance ............................±0.1%, ±0.5%, ±1% Temperature Coefficient ....................±100ppm/°C, ±50ppm/°C,
±25ppm/°C Temperature Range ...................................-55°C to +125°C Insulation Resistance ..................10,000 megohms minimum TCR Tracking..........................±5ppm/°C Environmental Characteristics Thermal Shock and
Power Conditioning ......................0.1% Short Time Overload......................0.1% Terminal Strength ........................0.25% Resistance to Soldering Heat........0.1% Moisture Resistance......................0.1% Life ................................................0.5% Physical Characteristics
Body Material Flammability ...........................Conforms to UL94V-0 Body Material........................Epoxy resin
AMBIENT TEMPERATURE ( C )
°
Package Power Ratings at 70°C
T S K
4604......0.50..........0.60........0.8 watts
4605......0.63..........0.75........1.0 watts
4606......0.75..........0.90........1.2 watts
4607......0.88..........1.05........1.4 watts
4608......1.00..........1.20........1.6 watts
4609......1.13..........1.35........1.8 watts
4610......1.25..........1.50........2.0 watts
4611......1.38..........1.65........2.2 watts
4612......1.50..........1.80........2.4 watts
4613......1.63..........1.95........2.6 watts
4614......1.75..........2.10........2.8 watts
4600T
Maximum package length is equal to 2.54mm (.100") times the
number of pins, less .005mm (.002").
Governing dimensions are in metric. Dimensions in parentheses
are inches and are approximate.
*Terminal centerline to centerline measurements made at point of
emergence of the lead from the body.
TRADEMARK
TYPICAL PART MARKING
Represents total content. Layout may vary.
HOW TO ORDER
46 11 T - 101 - 2222 F A B
Model
(46 = Conformal SIP)
Number of Pins
Physical Config.
?T = Low Profile Thin Film
?S = Medium Profile Thin Film
?K = High Profile Thin Film
Electrical Configuration
?101 = Bussed
?102 = Isolated
?106 = Series
Resistance Code
?First 3 digits are significant
?Fourth digit represents the
number of zeros to follow.
Absolute Tolerance Code
?B = ±0.1% ?F = ±1%
?D = ±0.5%
Temperature Coefficient Code
?A = ±100ppm/°C ?C = ±25ppm/°C
?B = ±50ppm/°C
Ratio Tolerance (Optional)
?A = ±0.05% to R1 ?D = ±0.5% to R1
?B = ±0.1% to R1
Consult factory for other available options.
Product Dimensions
Isolated Resistors (102 Circuit) Available in 4, 6, 8, 10, 12, 14, 16 Pin
Bussed Resistors (101 Circuit) Available in 4 through 16 Pin
These models incorporate 2 to 8 isolated thin-film resistors of equal value, each connected between a
separate pin.
Power Rating per Resistor T...............................................0.18 watt S...............................................0.20 watt K...............................................0.25 watt Resistance Range…...20 to 200K ohms These models incorporate 3 to 15
thin-film resistors of equal value, each
connected between a separate pin.
Power Rating per Resistor T...............................................0.10 watt S...............................................0.12 watt K...............................................0.15 watt
Resistance Range…49.9 to 100K ohms
Series Circuit (106 Circuit)
Available in 4 through 16 Pin
These models incorporate 3 to 15
thin-film resistors of equal value, each
connected in a series.
Power Rating per Resistor
T...............................................0.10 watt
S...............................................0.12 watt
K...............................................0.15 watt
Resistance Range.......20 to 100K ohms
SERIES CIRCUIT
106 CIRCUIT
116
ISOLATED RESISTORS102 CIRCUIT
68
4600T, S, K Series - Thin Film Conformal SIP