Process and conveyor belting Technical belt data sheet
Peflex ESM 10/2 0+S34 ivory AS FG
Article code 887131
General information Product group Synthetic belts Market segment Tobacco
Main features Antistatic, Foodgrade Belt support Slider bed, Rollers, Flat
Belt construction Fabric tension layer polyester spun stable 2-ply Topside Peflex EVA S34 Oval Stud ivory Bottomside fabric
fabric structure
natural
Characteristics Foodgrade (FG) yes Antistatic (AS) yes High conductive (HC) no Flame retardant (FR) no ATEX approval no
Technical belt data Hardness topside according to DIN 5350590A shore Force at 1% elongation according to ISO 2118110.0 N/mm 56.00 lbs./in. Belt thickness internal AB method KV.002 4.50 mm 0.177 in. Weight
internal AB method KV.004
3.40 kg/m20.696 lbs./ft.2 Thickness top cover 2.50 mm 0.098 in. Temperature range -20 to 50 °C -4 to 122 °F Temperature range short -50 to 70 °C -58 to 158 °F
Min. pulley diameter flexing 120.0 mm 4.724 in. Min. pulley diameter back flexing 180.0 mm 7.087 in. Standard belt width 3000 mm 118.11 in. Maximum belt width 3200 mm
125.98 in.
Endless instructions
Hot splicing is always preferable. Cold splicing can only be done when the belt is exposed to normal temperatures and the humidity is not excessive. For the working method, consult the splice information and the equipment literature. Apply the recommended splice as indicated in the separate information. Additional information
The information applies at approx. 20°C (68°F). Keep the belt tension to a minimum for maximum belt and conveyor life. Stated is the belt temperature. The allowable product temperature may vary.
The pulley diameters are valid for a hot spliced belt and at the indicated belt force. Depending on the splice and working conditions (e.g. temperature), different pulley diameters may be possible or necessary. When fasteners are used the minimum diameters are increased by approx. 50%.
Consult our specialists for available profiles and accessories.
Printed:April 21, 2014Edited:April 16, 2014
Because of continuous development, the presented data is subject to alteration. This data replaces that included in previous publications. Ammeraal Beltech excludes any liability for the incorrect use of the above stated information. Subject to the general terms and conditions of sale and delivery, as applied by its operating companies, are all activities performed and services rendered by Ammeraal Beltech.
? Ammeraal Beltech