Features
? Colorless transparency lens type
?φ5mm(T-13/4) all plastic mold type
? Super luminosity
Application
? Traffic Signal
? Massage Board
Outline Dimensions unit : mm
Absolute maximum ratings
Characteristic Symbol
Ratings Unit
Power Dissipation P D 120 mW
Forward Current I F 40 mA
*1Peak Forward Current I FP 65 mA Reverse Voltage V R 4 V
Operating Temperature T opr -25~85 ℃ Storage Temperature
T stg
-30~100
℃
*2Soldering Temperature T sol
260℃
for 5 seconds *1.Duty ratio = 1/16, Pulse width = 0.1ms *2.Keep the distance more than 2.0mm from PCB to the bottom of LED package
Electrical Characteristics Ta=25?C
Characteristic Symbol
Test Condition Min.
Typ. Max. Unit
Forward Voltage V F I F = 20mA 1.8 2.25 2.7 V *4Luminors Intensity I V I F = 20mA 1760 3600 5940 mcd Peak Wavelength λP I F = 20mA - 592 - nm Spectrum Bandwidth Δλ I F = 20mA - 30 -
nm
Reverse Current I R V R =
4V - - 10 uA
*3Half angle
θ1/2
I F = 20mA
-
±11
- deg
*3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity
*4. Luminous Intensity Maximum tolerance for each Grade Classification limit is ±18%
*4. Luminous Intensity classification
Characteristic Diagrams
Fig.4 Spectrum Distribution
Fig. 3 I F – Ta
Fig. 1 I F - V F
F o r w a r d C u r r e n t I F [m A ]
F F o r w a r d C u r r e n t I [m A ]
Relative Luminous Intensity [%]
Fig. 5 Radiation Diagram
SHE113YF /SHE113YF-(B)
These AUK products are intended for usage in general electronic equipments(Office and communication equipment, measuring equipment, domestic electrification, etc.).
Please make sure that you consult with us before you use these AUK products in equipm-ents which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, traffic signal, combustion central, all types of safety device, etc.).
AUK cannot accept liability to any damage which may occur in case these AUK products were used in the mentioned equipments without prior consultation with AUK.