OUTLINE /CDEP104
DIMENSIONS (mm)
/ インダクタンス公差
/ インダクタンス測定周波数(L)
/ 品名表記法
100kHz 100kHz
0.36μH ± 30% (N), 0.8μH – 4.3μH ± 20% (M)0.22μH ± 30% (N), 0.45μH – 2.5μH ± 20% (M)
Measuring Freq. (L)Tolerance of Inductance CDEP104(L)CDEP104(S)
CDEP104(L)CDEP104(S)
Ordering Code CDEP104 - -
: Parts No.
: Tolerance of inductance M (20%) N (30%)
: Packing
C (Carrier tape) B (Box)
:
88 (Low D.C.R. type) 50 (Standard type)
/ 無鉛製品について
About Lead-free products .Lead-free products are now available for sale
.To order a lead-free product, please add"NP" after the product type:無鉛製品は現在、販売されております。
ご注文の際は製品タイプ名の後に”NP”をつけてください。
e.g. △△△○×
Ordering code of lead-free product: Type name NP
△△△○× ..Ordering code of lead product: Type name-/ その他
Other *E Saturation Rated Current : The current either the inductance value becomes 35% (tolerance ±
30%) lower than its nominal value or becomes 25% (tolerance ± 20%) lower than its nominal °C)*E
直流重畳許容電流:直流重畳許容電流を流した時、インダクタンスが公称インダクタンスの65%以上(インダクタンスの交差が±30%時)、又は75%以上(インダクタンスの交差が±20%時)*IV Temperature Rise Current (Typ.) : The actual current when temperature of coil becomes
?T=40°C. (Ta=20*IV
温度上昇実力電流:直流電流を流した時、コイルの温度上昇がΔT=40℃となる電流の実力値°C)value.(Ta=20 となるとなる(Ta=20℃)
とする。(Ta=20℃)
外形寸法図
磁気構造図
https://www.wendangku.net/doc/684512511.html,
Rev1.0 09/2004
North America
Tel:(1) 847 545-6700Fax:(1) 847 545-6720
E-mail: sales@https://www.wendangku.net/doc/684512511.html, Japan
Tel:(81) 03 3667-3302Fax:(81) 03 3667-3408
Hong Kong
Tel:(852) 2880-6688Fax:(852) 2565-9600
E-mail: sales@https://www.wendangku.net/doc/684512511.html, Taiwan
Tel:(886) 2 2726-2177Fax:(886) 2 2728-2726
E-mail: sales@https://www.wendangku.net/doc/684512511.html, Singapore
Tel:(65) 6296-3388Fax:(65) 6296-3390
E-mail: sales@https://www.wendangku.net/doc/684512511.html, Europe
Tel:(32) 2673-9565Fax:(32) 2672-0454
E-mail: sales@https://www.wendangku.net/doc/684512511.html,
CONSTRUCTION
概要
By using the square wire, power inductors can be used for large currents with low profile and low resistance.平角線を使用する事により、薄形?低抵抗で大電流対応を実現しました。
( 0.22μH - 4.3μH )
2
1
3
BOTTOM VIEW / 裏面図
LAND PATTERNS (mm)
推奨ランド寸法 CONNECTION 端子接続