FMS2031-001中文资料
Production 3.0
1
Specifications subject to change without notice FMS2031-001
10 Watt GaAs Wide Band SPDT Switch Features:
? 3x3x0.9mm Packaged pHEMT Switch ? Ideal for WiMax, L, S, and C-band digital cellular, and WLAN applications ? High isolation, 36dB typ at 3.5GHz
? Low insertion loss, 0.5dB typ at 2.5GHz ? Low insertion loss, 0.96dB typ at 6GHz ? P1dB 42dBm at 5GHz
? Operates from a single positive voltage ? Less than 10μA control current at 35dBm input power
? RoHS compliant
V1
Description and Applications:
The FMS2031-001 is a 10 Watt, low loss, and single pole dual throw Gallium Arsenide antenna switch. The die is fabricated using the Filtronic FL05 0.5μm switch process technology, which offers leading edge performance optimised for switch applications. The FMS2031-001 is designed for use in WiMax, L, S, and C band wireless applications and WLAN access points where high linearity switching is required.
Absolute Maximum Ratings:
Parameter Symbol Absolute Maximum
Max Input Power Pin+42dBm
Control Voltage V ctrl+6V
Operating Temperature T oper-40°C to +100°C
Storage Temperature T stor-55°C to +150°C
Note: Exceeding any one of these absolute maximum ratings may cause permanent damage to the device. Truth Table:
Switch
State
VC1 VC2 ANT– RF1 ANT– RF2
(A)HIGH LOW Insertion Loss Isolation
(B)LOW HIGH Isolation Insertion Loss
General Test Conditions:
Note: External DC blocking capacitors are required on all RF ports (typ: 9pF)
All unused ports terminated in 50?.
High +2.7V to +6V
Low +0V to +0.2V
Production 3.0
FMS2031-001
2
Specifications subject to change without notice
Electrical Specifications: (T AMBIENT = 25°C, Vctrl = 0V/2.7V, Z IN = Z OUT = 50?)
Parameter
Test Conditions
Min
Typ
Max
Units
Insertion Loss
2.3 – 2.7 GHz
3.3 – 3.8 GHz
4.9 –
5.9 GHz
0.5 0.55 0.90.6 0.7
dB
Return Loss 2.3 – 2.7 GHz
3.3 – 3.8 GHz
4.9 –
5.9 GHz
27.5
21.5 >tba
dB
Isolation
2.3 – 2.7 GHz
3.3 – 3.8 GHz
4.9 –
5.9 GHz 30 30
32.5 35 23
dB
Input power at 0.1dB compression point 2.3 – 2.7 GHz
3.3 – 3.8 GHz
4.9 –
5.9 GHz 39.5
38.5 38
dBm
Input power at 0.5dB compression point 2.3 – 2.7 GHz
3.3 – 3.8 GHz
4.9 –
5.9 GHz
41
41 41
dBm EVM (Contribution due to Switch)
35dBm at 5.9GHz (OFDM WLAN 54)
? 0.5 %IP3
+15dBm 1980MHz +15dBm 1940MHz
65 dB Switching speed : T rise, T fall
T on, T off 10% to 90% RF and 90% to 10% RF
50% control to 90% RF and 50% control to 10% RF
<300 <800 ns ns Control Current
+35dBm RF input @0.96GHz
<5
10
μA
Specifications subject to change without notice Filtronic Compound Semiconductors Ltd
Typical Measured Performance on Evaluation Board (De-Embedded):
(Measurement Conditions V CTRL = 2.7V (high) & 0V (low), T AMBIENT = 25°C unless otherwise stated)
Pad Layout:
V1V2
ANT
Specifications subject to change without notice Filtronic Compound Semiconductors Ltd
RF1
RF2
*View from the top of the package
FN 12 Lead 3x3 Package Outline:
Pin Number
Description
1
N/C 2N/C 3N/C 4RF25N/C 6N/C 7V28ANT RF 9V110N/C 11N/C 12RF1PADDLE
GND
Q
Evaluation Board De-Embedding Data (Measured):
Filtronic Compound Semiconductors Ltd
Specifications subject to change without notice Filtronic Compound Semiconductors Ltd
Tape & Reel Specification:
Tape Dimensions
Description
Symbol
Size (mm)
Perforation
Diameter D0 1.5 ±0.1 Pitch P0 4.0 ±0.1 Position E1 1.75 ±0.1Cavity Length A0 3.3 ±0.1 Width B0 3.3 ±0.1
Depth
K
1.1 ±0.1
Cavity to Perforation (length direction)P2 2.0 ±0.1
Distance between centre lines
Cavity to Perforation
(width direction)
F 5.5 ±0.1
Carrier tape
Width
W
12 ±0.3
Specifications subject to change without notice Filtronic Compound Semiconductors Ltd
Preferred Assembly Instructions:
Available on request.
Disclaimers:
This product is not designed for use in any space based or life sustaining/supporting equipment.
Handling Precautions:
To avoid damage to the devices care should be exercised during handling. Proper Electrostatic Discharge (ESD) precautions should be observed at all stages of storage, handling, assembly, and testing. These devices should be treated as Class 1A (250-500 V) as defined in JEDEC Standard No. 22-A114. Further information on ESD control measures can be found in MIL-STD-1686 and MIL-HDBK-263.
Application Notes & Design Data:
Application Notes and design data, including S-parameters, are available on request.
Disclaimers:
This product is not designed for use in any space based or life sustaining/supporting equipment.
Ordering Information:
Part Number
Description
FMS2031-001-TR
Packaged Die
Tape & Reel (minimum quantity: 1k pcs)
FMS2031-001-TB Packaged Die supplied in a Tube FMS2031-001-EB
Packaged Die mounted on Evaluation Board