当前位置：文档库 › hp2560拆机图解

hp2560拆机图解

EL-MF877-00 Page 1 Template Revision B

Product End-of-Life Disassembly Instructions

Product Category: Notebooks and Tablet PCs Marketing Name / Model

[List multiple models if applicable.] HP EliteBook 2560p Notebook PC Name / Model #2 Name / Model #3 Name / Model #4

Name / Model #5

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE). 1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.

1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable.

Item Description Notes

Quantity of items

included in product Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA) With a surface greater than 10 sq cm

1 Batteries

All types including standard alkaline and lithium coin or button style batteries

2 Mercury-containing components

For example, mercury in lamps, display backlights, scanner lamps, switches, batteries

0 Liquid Crystal Displays (LCD) with a surface greater than 100 sq cm Includes background illuminated displays with gas discharge lamps 1 Cathode Ray Tubes (CRT)

0 Capacitors / condensers (Containing PCB/PCT) 0 Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height 0 External electrical cables and cords 0 Gas Discharge Lamps

0 Plastics containing Brominated Flame Retardants weighing > 25 grams (not including PCBs or PCAs already listed as a separate item above)

Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner Include the cartridges, print heads, tubes, vent chambers, and service stations. 0 Components and waste containing asbestos

EL-MF877-00 Page 2 Template Revision B

Components, parts and materials containing refractory ceramic fibers

0 Components, parts and materials containing radioactive substances

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if

applicable) Description #1 Cross head of screwdriver Description #2 TORX T8 (2.31mm) Description #3 Description #4 Description #5

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment: 1. Follow steps described in Disassembly instruction (file attached) 2. If parts can be removed without using a tool, remove it first.

3. Use correct screwdriver and torque value before unlock the screw.

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations).

MANUFACTURING PROCESS INSTRUCTIONS

MECHANICAL ASSEMBLY

1.00Station Version Station Version Station Version Station Version Station Version Station Version

1.0011 1.0021 1.0031 1.00

2 1.0012 1.0022 1.00

3 1.0013 1.0023 1.00

4 1.0014 1.0024 1.00

5 1.0015 1.0025 1.00

6 1.0016 1.0026 1.00

7 1.0017 1.0027 1.00

8 1.0018 1.0028 1.00

9 1.0019 1.0029 1.0010 1.0020 1.0030 1.00

Station Ver.

ALL 1.**2011-3-9首份SOP制作

程秀青

Sub-assembly name:Styx FA DIS-ASS'Y B SOP Document No.:Styx FA DIS-ASS'Y B SOP

Date Content

Design A.Current station version list:

B.Version Modify list:

闫荣荣Revision:

Date:

2011-3-9Page: 1 of 34

Written by:MODEL : STYX

Notes : If finding anything uncommon, notice foreman or assistant at once.

Name : Ver. :

Date :Holding fixture list (holding fixture standard)

Qty Holding fixture list (holding fixture standard)Qty

Step ：

Disassemble rubber 1.Disassemble rubber*4 away from the four

screw holes.

1.002011/03/09

6054B0947501

6054B0947401

6054B0947901

6054B0947601

Notes : If finding anything uncommon, notice foreman or assistant at once.

Name : Ver. : Date :Holding fixture list (holding fixture standard)

Qty Holding fixture list (holding fixture standard)Qty

Step ：

Disassemble battery

1.Disassemble battery ，push the battery latch

shown in the figure to left side and take out battery.

1.002011/03/09

Notes : If finding anything uncommon, notice foreman or assistant at once.

Name : Ver. :

Date :Holding fixture list (holding fixture standard)

Qty Holding fixture list (holding fixture standard)Qty Step ：

1.Disassemble Bottom door ，push the Bottom

Door latch to the left side and take out the bottom door.

Disassemble Bottom door SIM card

Bottom door

Bottom door lock

1.002011/03/09

Notes : If finding anything uncommon, notice foreman or assistant at once.

Name : Ver. :

Date :Holding fixture list (holding fixture standard)

Qty Holding fixture list (holding fixture standard)Qty

Step ：

Disassemble DDR 1.Disassemble DDR * 2 out of M/B according

to the following figure .

DDR

1.002011/03/09

Notes : If finding anything uncommon, notice foreman or assistant at once.

Name : Ver. :

Date :Holding fixture list (holding fixture standard)

Qty Holding fixture list (holding fixture standard)Qty Step ：

Disassemble ODD and loosen screw 1.Loosen ODD set screw*1

2. Disassemble ODD from base, push it

rightwards as the figure showed.

Electric cross screw driver

ODD

1.002011/03/09

Notes : If finding anything uncommon, notice foreman or assistant at once.

Name : Ver. :

Date :Holding fixture list (holding fixture standard)

Qty Holding fixture list (holding fixture standard)Qty

Step ：

Disassemble cable 1. Pull out Speaker cable CNTR from M/B

2. Pull out Blue Tooth Cable CNTR from M/B ，take Cable away from the hook.

Blue Tooth Cable

speaker cable

1.002011/03/09

Notes : If finding anything uncommon, notice foreman or assistant at once.

Name : Ver. :

Date :Holding fixture list (holding fixture standard)

Qty Holding fixture list (holding fixture standard)Qty Step ：

Disassemble Speaker and Bluetooth 1. Loosen screws ，disassemble Speaker

(6052A0020901) *1 labeling 1

(6052B0103801) *2 labeling 2,3(figure 1)。2. Take B/T module out from the groove of Speaker

(figure 1)/(figure 2)

3. Take the cable out from BT module

Figure 2BT module speaker

Figure 1

Electric cross screw driver

Figure 3

1.002011/03/09

Notes : If finding anything uncommon, notice foreman or assistant at once.

Name : Ver. : Date :Holding fixture list (holding fixture standard)

Qty Holding fixture list (holding fixture standard)Qty Step ：

Disassemble HDD from unit

1. Loosen screw*4

2. Disassemble the HDD and lift upwards off the unit

HDD 3

1.002011/03/09

Electric cross screw driver

Notes : If finding anything uncommon, notice foreman or assistant at once.

Name : Ver. : Date :Holding fixture list (holding fixture standard)

Qty Holding fixture list (holding fixture standard)Qty Step ：

Disassemble HDD module

1.Disassemble HDD CNTR away from HDD (figure

1/ figure 3)

2. Loosen HDD screw*4 (figure 4/ figure 5)

3. Disassemble HDD BRKT away from HDD (figure

Electric cross screw driver 1HDD Support fixture 1Screws supplier

Figure 3

mylar

Figure 5

Figure 4

Figure 1

Figure 2

1.002011/03/09

Notes : If finding anything uncommon, notice foreman or assistant at once.

Name : Ver. : Date :Holding fixture list (holding fixture standard)

Qty Holding fixture list (holding fixture standard)Qty Step ：

1. Loosen screw *1，disassemble Modem from MB

(figure 1)

2. If no Modem, need to disassemble Rubber. (figure 2)

3. Disassemble Modem cable away from Modem module

4. Pull out RJ11 cable from Modem

Disassemble Modem

Electric cross screw driver

Figure 1

Figure 2

1.002011/03/09

Notes : If finding anything uncommon, notice foreman or assistant at once.

Name : Ver. : Date :Holding fixture list (holding fixture standard)

Qty Holding fixture list (holding fixture standard)Qty Step ：

Disassemble WWAN Card

1.Disassemble WWAN Cable * 2away from WWAN

CNTR 。

2. Loosen screw * 2(figure 1)。

3. Disassemble WWAN Card away from M/B.

Routing stick

1.002011/03/09

Figure 1

Notes : If finding anything uncommon, notice foreman or assistant at once.

Name : Ver. : Date :Holding fixture list (holding fixture standard)

Qty Holding fixture list (holding fixture standard)Qty Step ：

Disassemble WLAN Card

1. Disassemble WLAN Cable * 2away from WLAN

CNTR

2. Loosen screw * 2(figure 1)

3. Disassemble WLAN Card away from M/B

Routing stick

1.002011/03/09

Figure 1

Notes : If finding anything uncommon, notice foreman or assistant at once.

Name : Ver. : Date

:Holding fixture list (holding fixture standard)

Qty Holding fixture list (holding fixture standard)Qty Step ：

Disassemble Fan

1. Loosen Fan screw *2(figure 2)

2. Disassemble Fan Cable away from M/B

CNTR (figure 1)

Figure 1

Figure 2

1.002011/03/09

Electric cross screw driver

Notes : If finding anything uncommon, notice foreman or assistant at once.

Name : Ver. : Date :Holding fixture list (holding fixture standard)

Qty Holding fixture list (holding fixture standard)Qty Step ：

Disassemble thermal module

1. Loosen thermal screw * 4（figure 2）

2. Disassemble Thermal away from M/B (figure 1)

Figure 1

Figure 2

1.002011/03/09

Electric cross screw driver

Notes : If finding anything uncommon, notice foreman or assistant at once.

Name : Ver. : Date :Holding fixture list (holding fixture standard)

Qty Holding fixture list (holding fixture standard)Qty Step ：

Disassemble CPU

1.Loosen CPU socket screw(Going

counterclockwise)

2. Take CPU away from socket by suction pen

and place it in the kitting box.

One-line screw driver 1Suction pen

Figure 1

Figure 2

1.002011/03/09

Notes : If finding anything uncommon, notice foreman or assistant at once.

Name : Ver. : Date :Holding fixture list (holding fixture standard)

Qty Holding fixture list (holding fixture standard)Qty Step ：

1. Loosen K/B screw * 3

Loosen K/B screw

1.002011/03/09

Electric cross screw driver

Notes : If finding anything uncommon, notice foreman or assistant at once.

Name : Ver. : Date :Holding fixture list (holding fixture standard)

Qty Holding fixture list (holding fixture standard)Qty

Step ：

Disassemble Keyboard

1.Pull out K/B FFC from MB CNTR (figure 1)

2.Pull out Stick Point FFC from M/B CNTR (figure 2)

3. Disassemble Keyboard ,hold peak K/B of from fan gob.(figure 3)

Figure 1

FFC

Figure 2

Shall K/B peaked

Figure 3

1.002011/03/09