当前位置：文档库 › 5082-B09G-KK000中文资料

5082-B09G-KK000中文资料

Description

The 18:88 and 88:88 0.56" Four Digit Seven Segment Displays have surface painted in neutral gray and black for enhanced on/off contrast. All devices are available in either common anode or common cathode configuration with tinted green segments or untinted segments.Agilent HDSP-B0xG

18:88 and 88:88 0.56" Four Digit GaP Green Seven Segment Display

Data Sheet

Features

?Excellent appearance

?Evenly illuminated segments

?Gray face for optimum on/off

contrast

?Choice of colors: Green

?Choice of character size:

0.56 inch

FRONT SIDE

2 – ?1.70RIGHT SIDE

A A A D

D C F E

F E F E

B C

B C B C G

DP3DP2

DIGIT 2DIGIT 3

DIGIT 4

DIGIT 1

F E

B G D NOTE:

ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).

UNLESS OTHERWISE STATED, TOLERANCES ARE ± 0.25 mm.

Pin Configuration Function Pin HDSP-B01G/B03G/B05G/B07G/B09G HDSP-B02G/B04G/B06G/B08G/B10G 1Anode E Cathode E 2Anode D Cathode D 3Anode DP Cathode DP 4Anode C Cathode C 5Anode G

Cathode G

6Digit 4 Common Cathode Digit 4 Common Anode 7Anode B

Cathode B

8Digit 3 Common Cathode Digit 3 Common Anode 9Digit 2 Common Cathode Digit 2 Common Anode 10Anode F Cathode F 11Anode A

Cathode A

12Digit 1 Common Cathode

Digit 1 Common Anode

FRONT SIDE

2 – ?1.70RIGHT SIDE

A A D

D B C

F E

F E F E

B C

B C B C G

DP3DP2

DIGIT 2DIGIT 3

DIGIT 4

DIGIT 1

NOTE:

ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).

UNLESS OTHERWISE STATED, TOLERANCES ARE ± 0.25 mm.

HDSP-B01G and HDSP-B05G (Common Cathode)

HDSP-B02G and HDSP-B06G (Common Anode)

DIGIT 1

DIGIT 2DIGIT 3DIGIT 4A 11B 7C 4D 2E 1F 10G 5DP 3

DIGIT 1

DIGIT 2DIGIT 3DIGIT 4A 11B 7C 4D 2E 1F 10G 5DP 3

HDSP-B03G, HDSP-B07G, and HDSP-B09G (Common Cathode)

HDSP-B04G, HDSP-B08G, and HDSP-B10G (Common Anode)

DIGIT 1

DIGIT 2DIGIT 3DIGIT 4A 11B 7C 4D 2E 1F 10G 5DP

DIGIT 1DIGIT 2DIGIT 3DIGIT 4A 11B 7C 4D 2E 1F 10G 5DP 3

Devices

HDSP-Description

B01G88:88 0.56" Green 4 Digit, Tinted Green, Common Cathode, Display 18:88, Gray Color Surface B02G88:88 0.56" Green 4 Digit, Tinted Green, Common Anode, Display 18:88, Gray Color Surface B03G88:88 0.56" Green 4 Digit, Tinted Green, Common Cathode, Display 88:88, Gray Color Surface B04G88:88 0.56" Green 4 Digit, Tinted Green, Common Anode, Display 88:88, Gray Color Surface B05G88:88 0.56" Green 4 Digit, Untinted, Common Cathode, Display 18:88, Gray Color Surface

B06G88:88 0.56" Green 4 Digit, Untinted, Common Anode, Display 18:88, Gray Color Surface

B07G88:88 0.56" Green 4 Digit, Untinted, Common Cathode, Display 88:88, Gray Color Surface

B08G88:88 0.56" Green 4 Digit, Untinted, Common Anode, Display 88:88, Gray Color Surface

B09G88:88 0.56" Green 4 Digit, Untinted, Common Cathode, Display 88:88, Black Color Surface

B10G88:88 0.56" Green 4 Digit, Untinted, Common Anode, Display 88:88, Black Color Surface

Part Numbering System

5082 -X X X X-X X X X X

HDSP-X X X X-X X X X X

Mechanical Options[1]

00: No Mechanical Option

Color Bin Options[1,2]

0: No Color Bin Limitation

Maximum Intensity Bin[1,2]

0: No Maximum Intensity Bin Limitation

Minimum Intensity Bin[1,2]

0: No Minimum Intensity Bin Limitation

Device Configuration/Color[1]

G: Green

Device Specific Configuration[1]

Refer to Respective Datasheet

Package[1]

Refer to Respective Datasheet

Notes:

1. For codes not listed in the figure above, please refer to the respective datasheet or contact

your nearest Agilent representative for details.

2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically

restricted to 1 bin per tube (exceptions may apply). Please refer to respective datasheet for

specific bin limit information.

Electrical/Optical Characteristics at T A = 25?C Device Series HDSP-Parameter

Symbol Min.Typ.Max.

Units Test Conditions Luminous Intensity/Segment

I V

20003200μcd I F = 10 mA

(Digit Average)

32004500All Devices

Forward Voltage/Segment or DP V F 1.80

2.20 2.60

V I F = 20 mA Peak Wavelength λPEAK 568nm I F = 20 mA Dominant Wavelength λd 573

I F = 20 mA Luminous Intensity I V-M 2:1I F = 10 mA Matching Ratio Reverse Current

I R

100

μA

V R = 5 V

Notes:

1.Typical specification for reference only. Do not exceed absolute maximum ratings.

2.The dominant wavelength, λd , is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.

Absolute Maximum Ratings

Description

Green Units Average Power per Segment or DP

65mW Peak Forward Current per Segment or DP 100mA DC Forward Current per Segment or DP 25

mA Operating Temperature Range

–40 to +105?C Storage Temperature Range

–40 to +105?C Reverse Voltage per Segment or DP

5V Wavesoldering Temperature for 3 seconds 2 mm below body

250

Note:

1.Derate above 40?C at 0.33 mA/?C for green.

B01G, B02G, B03G, B04G B05G, B06G, B07G, B08G,B09G, B10G Intensity Bin Limits (μcd at 10 mA)Device Series HDSP-B01G, B02G, B03G, B04G B05G, B06G, B07G, B08G, B09G, B10G

Bin Name Min.[1]Max.[1]Min.[1]Max.[1]K 20003200NA NA L 3200505032005050M

NA NA

50508000

Note:

1.Tolerance for each bin limit is ±10%.

Color Categories (Tolerance ± 1 nm)Rank Symbol Hue Range Unit 22573.5–576.5nm 3

570.5–573.5

Contrast Enhancement

For information on contrast enhancement, please see Application Note 1015.

Soldering/Cleaning

Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the

chlorinated hydrocarbon family (methylene chloride,

trichloroethylene, carbon tetrachloride, etc.) are not

recommended for cleaning LED parts. All these various solvents attack or dissolve the

encapsulating epoxies used to form the package of plastic LED parts.

Figure 1. Maximum allowable DC current vs.ambient temperature.

Figure 2. Forward current vs. forward voltage.

Figure 3. Relative luminous intensity vs. DC forward current.Figure 4. Relative efficiency (luminous intensity per unit current) vs. peak current.

I D C – M A X I M U M D C C U R R E N T P E R S E G M E N T – m A

T A – AMBIENT TEMPERATURE – °C

I F – F O R W A R D C U R R E N T P E R S E G M E N

T – m A

V F – FORWARD VOLTAGE – V

R E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 10 m

A F O R G R E E N )

I F – DC FORWARD CURRENT – mA

R E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D T O 1 A T 10 m A )

1.400

101520253035404550PEAK FORWARD CURRENT

PER SEGMENT – mA

https://www.wendangku.net/doc/7a5196484.html,/semiconductors

For product information and a complete list of distributors, please go to our web site.For technical assistance call:

Americas/Canada: +1 (800) 235-0312 or (916) 788-6763

Europe: +49 (0) 6441 92460China: 10800 650 0017

Hong Kong: (+65) 6756 2394

India, Australia, New Zealand: (+65) 6755 1939Japan: (+81 3) 3335-8152(Domestic/Interna-tional), or 0120-61-1280(Domestic Only)Korea: (+65) 6755 1989

Singapore, Malaysia, Vietnam, Thailand,Philippines, Indonesia: (+65) 6755 2044Taiwan: (+65) 6755 1843Data subject to change.