C t
h
n
o
t
h
g
i
r
华
三
o
t
n -B r f i d
e n
t i 华
Analog Multiplier for Power Factor
Correction
The built-in analog multiplier output limits the
MOSFET peak current with respect to the AC half
wave rectified input voltage. Through controlling
the CS comparator threshold as the AC line
voltage traverses sinusoidally from zero to peak
line voltage, the load appears to be resistive to the
AC line and near to unity power factor can be
achieved. In SN03A, the two inputs for the
multiplier are designed to achieve good linearity
O
-
B g h
C
o n
f i d
e n
t i a l t
o
三
华
IMPORTANT NOTICE
RIGHT TO MAKE CHANGES
On-Bright Electronics Corp. reserves the right to make corrections, modifications, enhancements, improvements and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.
WARRANTY INFORMATION
On-Bright Electronics Corp. warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with its standard warranty. Testing and other quality control techniques are used to the extent it deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed.
On-Bright Electronics Corp. assumes no liability for application assistance or customer product design. Customers are responsible for their products and applications using On-Bright’s components, data sheet and application notes. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards.
LIFE SUPPORT
On-Bright Electronics Corp.’s products are not designed to be used as components in devices intended to support or sustain human life. On-bright Electronics Corp. will not be held liable for any damages or claims resulting from the use of its products in medical applications.
MILITARY
On-Bright Electronics Corp.’s products are not designed for use in military applications. On-Bright Electronics Corp. will not be held liable for any damages or claims resulting from the use of its products in military applications.
O
n -
B r
i g h
t C
o n
f i d
e n
t i a l t
o
三
华