VI-2WJCW中文资料
12 1-800-735-6200
70
Converter Selection Chart
VI-2
Mechanical Drawing
Features
s Up to 50W/Cubic Inch
s UL, CSA, TüV, VDE, BABT, AUSTEL
s Up to 90% Efficiency s Size: 4.6" x 2.4" x 0.5"(116,8 x 61,0 x 12,7)
s Remote Sense and Current Limit s OVP, Thermal Shutdown s Logic Disable
s Wide Range Output Adjust
s Compatible Power Booster Modules s ZCS Power Architecture s Low Noise FM Control s CE Marked
VI-200
DC-DC Converters 50 to 200 Watts
Product Highlights
The VI-200 Family, with over 8 million
shipped, is Vicor’s first generation of
“zero-current-switching” component-level DC-DC converters.
Operating at frequencies up to 2 MHz, VI-200 Family Converters offer
exceptional power density, efficiency,noise performance, reliability and ease of use. Power Boosters provide a simple, cost effective, off-the-shelf solution for higher power output requirements. One or more boosters may be used to create synchronous arrays capable of supplying several kilowatts of output power.
The flexibility of Vicor’s power components is also available in half-size, half-power VI-J00 MiniMods. (pg. 72)
Packaging Options
SlimMods?, high power density,
flangeless packages and FinMods?,featuring integral finned heatsinks.SlimMod: Option suffix: - S Example: VI - 2XX - XX - S
FinMod: Option suffix: - F1and - F2Examples:
VI - 2XX - XX -F1, 0.75" height VI - 2XX - XX -F2, 1.00" height
Max. Output For 5V Outputs > 5V Outputs
< 5V Outputs
(1)75W 75W 15A (2)150W 150W 30A (3)
100W
100W
20A
* Brownout 75% of rated load; transient voltage for 1 second.
Max. Output For 5V Outputs > 5V Outputs < 5V Outputs
(4)200W 200W 40A (5)150W 200W 40A (6)
75W
100W
20A
Rev 3 1 of 2
For the latest Vicor Product Information: https://www.wendangku.net/doc/7512271123.html,
12 1-800-735-6200
71
VI-200 E-Grade
VI-200 C-, I-, M-Grade PARAMETER
MIN.TYP.MAX.
MIN.
TYP.
MAX.
UNITS
TEST CONDITIONS
s Input Characteristics Inrush charge
120x10-6120x10-6200x10-6Coulombs
Nominal line
Input reflected ripple current – pp 10%
10%
I IN
Nominal line, full load Input ripple rejection
dB 120 Hz, nominal line dB 2400 Hz, nominal line
No load power dissipation 1.352
1.352
Watts
s Output Characteristics Setpoint accuracy 1%
2%0.5%1%V NOM Load/line regulation 0.5%0.05%0.2%V NOM LL to HL, 10% to Full Load Load/line regulation 1%
0.2%0.5%V NOM LL to HL, No Load to 10%Output temperature drift 0.020.010.02
% / °C Over rated temp.
Long term drift 0.02
0.02%/1K hours
Output ripple - pp: 2V, 3.3V 150 mV 60 mV 100 mV 20 MHz bandwidth 5V 5%2%3%20 MHz bandwidth 10-48V 3%0.75%
1.5%20 MHz bandwidth Trim range 1
50%110%
50%110%Total remote sense compensation 0.5
0.5Volts 0.25V max. neg. leg OVP set point 125%2
115%125%2
135%V NOM Recycle power Current limit
105%135%105%125%I NOM Automatic restart
Short circuit current 320%
140%
20%
130%
I NOM
s Control Pin Characteristics Gate out impedance 5050Ohms Gate in impedance
103103Ohms Gate in open circuit voltage 6
6
Volts Use open collector
Gate in low threshold 0.650.65Volts Gate in low current 66mA
Power sharing accuracy 0.95
1.05
0.95
1.05
s Dielectric Withstand Characteristics Input to output 3,0003,000V RMS Baseplate earthed
Output to baseplate 500500V RMS Input to baseplate 1,5001,500
V RMS
s Thermal Characteristics Efficiency
78-88%80-90%Baseplate to sink 0.20.2°C/Watt With Vicor P/N 01777Thermal shutdown 490
95
10590
95
105
°C
Cool and recycle power (Drivers only)to restart
s Mechanical Specifications Weight
6.0 (170) 6.0 (170)Ounces (Grams)
110V, 12V and 15V outputs, standard trim range ±10%. Consult factory for wider trim range. 2
131% nominal for booster modules.
3Output voltages of 3.3V or 5V incorporate foldback current limiting; all other outputs provide constant current limiting.4No overtemp protection in booster modules.
Converter Specifications
(typical at T BP =25°C, nominal line and 75% load, unless otherwise specified)
25+20Log ( Vin
)
Vout
30+20Log ( Vin
)Vout
20+20Log ( Vin
)
Rev 3 2 of 2
For the latest Vicor Product Information: https://www.wendangku.net/doc/7512271123.html,