文档库 最新最全的文档下载
当前位置:文档库 › APR3001-15A中文资料

APR3001-15A中文资料

APR3001-15A中文资料
APR3001-15A中文资料

APR3001/2/3

ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise

customers to obtain the latest version of relevant information to verify before placing orders.Features

General Description

Applications ?Computers ?Cell Phones ?Portable Electronics ?

μP Power Supply Monitoring

The APR3001/2/3 are designed to monitor voltage supplies in μP and digital systems. The quiescent current is extremely low, typically 1.5 μA, making it ideal for portable battery operated equipment. The APR3001/2/3 operate by monitoring the system power supply voltage. When the input voltage drops below a fixed threshold, the device asserts a reset signal for a fixed time period after Vcc rises above the fixed threshold. The APR3001/2/3 series is avail-able with three output stage versions : APR3001push-pull active low output, APR3002 push-pull ac-tive high output and APR3003 open drain active low output. They are also designed to reject fast line tran-sient glitches on Vcc. The APR3001/2/3 are come in a miniature SOT-23, SOT-23-5, SOT-89 packages.

? 1.2V to 6V Input Voltage Range

? Low Quiescent Current : less Than 1.5 μA ? High accuracy detection threshold : ±1.5%

? Fixed trimmed reset thresholds for 1.5V, 1.75V,

2.32V, 2.63V, 2.93V,

3.08V, 3.9V,

4.38V.

? Reset Timeout Period 250ms ? Available output configurations

- Open-drain output

- CMOS active high output - CMOS active low output

? SOT-23 , SOT-23-5 and SOT-89 packages ? No external components Pin Configuration

SOT-23 (Top View)R e s e t 1

2

3G N D V C C R e s e t (3001/3)(3002)SOT-23-5 (Top View)

SOT-89 (Top View)

V CC GND NC

NC

1

2

3

45Reset Reset

(3001/3)(3002)GND

V CC 213

Reset Reset

(3001/3)(3002)

APR3001/2/3

Ordering and Marking Information

Absolute Maximum Ratings

Pin Function Descrpition

Note: The pin sequence here might not be correct for all different package types, and please refer pin configuration in page1 for correct pin assignment.

APR3001/2/3

Block Diagram

V

GND APR3001

V

GND APR3002

V

c c

GND APR3003

APR3001/2/3

Part Number Description

Electrical Characteristics

V IN = 5V, T A = -40 to 85°C unless otherwise noted. Typical values are at T A=25°C, V CC = 5V for 4.38V versions, V CC = 3.3V for 3.08/2.93V versions, V CC = 3.0V for 2.63V. versions and V CC = 2.5V for 2.32V CC CC

Application Circuit

APR3001/2/3 Timing Chart

APR3001/2/3

Typical Characteristics

S u p p l y C u r r e n t (u A )

Maximum Transient Duration vs. O u t p u t S i n k C u r r e n t (m A )

APR3001/2/3

Typical Characteristics

APR3001/2/3

Power Up

Typical Characteristics

Power Down

Time (200ms/div)

Vcc(0.5V/div)

Vcc=V TH to (V TH -100mV)

RESET(2V/div)

Time (10us/div)

Vcc(2V/div)

RESET(2V/div)Vcc(2V/div)

RESET(2V/div)

Time (50ms/div)

APR3001/2/3

Application Information

V CC V CC Transient Rejection Array The APR3001/2/3 have the function to reject the tran-

sient glitches from the power line. The Maximum Tran-

sient Duration vs. Reset Threshold Overdrive shows

at Typical Characteristics.The transient voltage with

the duration under the curve will not generate a reset

signal, e.g. a transient of 100mV below the reset

threshold voltage have the duration more than 35us, it

V CC

the V CC=1.2V, below 1.2V the IC is shutdown, and

the output becomes a floating state. If it is a trouble, a

resistor should be connected from reset output to

ground to keep the reset output low (see Figure 1).

For The APR3002, a pull-up resistor to V CC is required

to keep the valid reset output for V CC below 1.2V.

APR3001/2/3 Packaging Information SOT-23

APR3001/2/3 Packaging Information SOT-23-5

APR3001/2/3

Packaging Information

SOT-89 (Reference EIAJ ED-7500A Reg stration SC-62)

APR3001/2/3

Physical Specifications

T L

T P

25

T e m p e r a t u r e

Tim e

Reflow Condition (IR/Convection or VPR Reflow)

Classificatin Reflow Profiles

APR3001/2/3

Reliability test program

Carrier Tape & Reel Dimensions

APR3001/2/3

Carrier Tape & Reel Dimensions

Cover Tape Dimensions

Customer Service

Anpec Electronics Corp.

Head Office :

5F, No. 2 Li-Hsin Road, SBIP,

Hsin-Chu, Taiwan, R.O.C.

Tel : 886-3-5642000

Fax : 886-3-5642050

Taipei Branch :

7F, No. 137, Lane 235, Pac Chiao Rd.,

Hsin Tien City, Taipei Hsien, Taiwan, R. O. C.

Tel : 886-2-89191368

Fax : 886-2-89191369

相关文档