线艺宽频锥形带屏蔽飞线电感系列

Broadband Conical Inductors

Dimensions

A B max C max D E BCL-531 0.008 ±0.002 0.071 0.179 0.166 0.100 inches 0,20 ±0,05 1,80 4,55 4,216 2,54 mm 0.008 ±0.002 0.045 0.115 0.166 0.100 inches 0,20 ±0,05 1,14 2,92 4,216 2,54 mm BCL-652 0.008 ±0.002 0.140 0.435 0.390 0.100 inches 0,20 ±0,05 3,56 11,05 9,906 2,54 mm BCL-802 0.008 ±0.002 0.074 0.237 0.180 0.100 inches 0,20 ±0,05

1,88

6,02

4,572

2,54

mm

Part Inductance 1 DCR max

I rms 2 number ±5% (μH) (Ohms) (mA)B CL-531JL 0.53 0.15 830BCL-122JL 1.20 1.05 200

BCL-652JL 6.5 0.70

BCL-802JL 8.0 3.39 150

1. Inductance measured at 10 MHz, 0.1 Vrms, 0 Adc using an Agilent/

HP 4286A LCR meter and a Coilcraft CCF 1111 fixture.2. Average current for a 40°C rise above 25°C ambient.3. Operating temperature range ?40°C to +85°C.4. Electrical specifications at 25°C.

Optimum mounting angle is application specific.

C Terminations Tin-silver-copper (96.5/3/0.5) over copper Ambient temperature –40°C to +85°C

Storage temperature Component: –40°C to +85°C. Packaging trays: –40°C to +80°C

Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity)

Failures in Time (FIT) / Mean Time Between Failures (MTBF)

38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332Packaging 24 per tray

PCB washing Only pure water or alcohol recommended

? Designed specifically for broadband and high frequency applications.

? Operates as a series of narrow-band inductors throughout an operating frequency range of 10 MHz to 40 GHz.

? Ideal for use in ultra-wideband bias T ees, where the conical inductor provides the path for the DC bias injection or extraction while isolating the power source from the active device.? Supplied with “flying leads” that allow adjustment of the mounting angle.

? For a surface mount version with a self positioning mounting bracket, consider the BCR series.

Broadband Conical Inductors

Insertion Loss

Response curves measured in a bias tee configuration with an Agilent/HP 8722ES network analyzer.

Return Loss

Frequency (GHz)

S 21 (d B )

Frequency (GHz)

S 11 (d B )

SMT Broadband Conical Inductors

1. When ordering, please specify

termination and packaging codes:

BCR-802J LC

Termination: L = Tin-silver-copper over silver-platinum-glass frit

Special order, added cost:

S = Tin-lead over silver-platinum-glass frit

Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic

tape

BCR-122JL: 500 parts per full reel;

BCR-531JL and BCR-802JL: 300 parts per full reel; BCR-652JL: 200 parts per full reel

B = Less than full reel. In tape, but not machine ready.

T o have a leader and trailer added ($25 charge), use code letter C instead.

2. Inductance measured at 10 MHz, 0.1 Vrms, 0 Adc using an Agilent/HP 16193A fixture in an Agilent/HP 4287A LCR meter or equivalents.

3. Current that causes a 40°C temperature rise from 25°C ambient.

4. Electrical specifications at 25°C.

Refer to Doc 362 “Soldering Surface Mount Components” before soldering.

Part Inductance 2 DCR max I rms 3 number 1

±5% (μH) (Ohms) (mA)BCR-531JL_ 0.53 0.15 830BCR-122JL_ 1.20 1.05 200BCR-652JL_ 6.5 0.70 510BCR-802JL_ 8.0 3.39 150

? Full-length cap fully protects the coil and provides a large surface for pick and place.

? The self positioning mounting bracket has four soldered pads for excellent board adhesion.

? Designed specifically for broadband and high frequency applications.

? Operates as a series of narrow-band inductors throughout an operating frequency range of 10 MHz to 40 GHz.? Ideal for use in ultra-wideband bias T’s, where the conical inductor provides the path for the DC bias injection or extrac-tion while isolating the power source from the active device.? For a “flying lead” version that allows adjustment of the mounting angle consider the BCL series

Terminations Tin-silver-copper over silver-platinum-glass frit Other terminations available at additional cost.

Weights BCR-122: 34 mg; BCR-531: 101 mg; BCR-802: 107 mg; BCR-652: 472 mg

Ambient temperature –40°C to +85°C

Storage temperature Component: –40°C to +85°C. T ape and reel packaging: –40°C to +80°C

Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity)

Failures in Time (FIT) / Mean Time Between Failures (MTBF)

38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332Packaging

BCR-122L: 500/7″ reel; 2000/13″ reel Plastic tape: 12 mm wide, 0.36 mm thick, 8 mm pocket spacing, 3.51 mm pocket depth BCR-531L: 300/7″ reel; 1500/13″ reel Plastic tape: 12 mm wide, 0.36 mm thick, 8 mm pocket spacing, 4.83 mm pocket depth BCR-652L: 200/7″ reel; 750/13″ reel Plastic tape: 24 mm wide, 0.33 mm thick, 12 mm pocket spacing, 6.45 mm pocket depth BCR-802L: 300/7″ reel; 1500/13″ reel Plastic tape: 12 mm wide, 0.36 mm thick, 8 mm pocket spacing, 4.83 mm pocket depth PCB washing Only pure water or alcohol recommended

SMT Broadband Conical Inductors

BCR-531, BCR-802

BCR-122

BCR-652

A B

C D E F

BCR-531 0.150 ±0.010/ 3,81±0,25 0.220 ±0.010 / 5,59 ±0,25 0.160 ±0.010 / 4,06 ±0,25 0.040 / 1,02 0.150 / 3,81 0.080 / 2,03BCR-122 0.105 ±0.010 / 2,67 ±0,25 0.120 ±0.010 / 3,05 ±0,25 0.110 ±0.010 / 2,79 ±0,25 0.030 / 0,76 0.070 / 1,78 0.050 / 1,27BCR-652 0.220 ±0.010 / 5,59 ±0,25 0.440 ±0.010 / 11,18 ±0,25 0.220 ±0.010 / 5,59 ±0,25 0.050 / 1,27 0.360 / 9,14 0.140 / 3,56BCR-802 0.150 ±0.010 / 3,81 ±0,25 0.220 ±0.010 / 5,59 ±0,25 0.160 ±0.010 / 4,06 ±0,25 0.040 / 1,02 0.150 / 3,81 0.080 / 2,03

Dimensions (inches /millimeters )

T op

View

T op View

T op View

Front View

*

Pad is for mounting stability only;do not connect to circuit.Connecting to circuit may adversely affect performance.

Insertion Loss

Response curves measured in a bias tee con-figuration with an Agilent/HP 8722ES network analyzer.

Return Loss

Frequency (GHz)S 21 (d B )

Frequency (GHz)

S 11 (d B )

深圳市恒大创新科技有限公司是美国线艺电感(Coilcraft)大陆地区的专业增值分销商，我公司主营射频电感、薄片电感、功率电感、背光电感、变压器和滤波器等全系列的产品，我们能够给您提供最优的价格，最好的服务，及时稳定的供货，以及强大的技术支持。

Coilcraft(线艺)是全球领先的射频和功率电感制造商，线艺成立于1945年，是世界上最早和最大的磁性元件制造商之一。在一些调查中，工程师均表示，线艺是他们最喜爱的品牌，并且会将它推荐给朋友。您会发现线艺的客户服务和产品质量在业内是无可匹敌的。在中国拥有多个制造工厂线艺于1990年在中国大陆设立第一间工厂。今天拥有多个生产基地，保证为您提供源源不断且可靠的产品。销售办事处遍及亚洲，同时还有多个货仓，能够快速供货。富于创新的设计师和制造商，线艺发明的许多电感设计现都已成为行业标准。线艺的工程师将继续创新，打造更小、性能更好、成本更低的产品。线艺元件用于医疗设备、飞机、汽车和其它质量和一致性要求相当高的产品中。

恒大创新实业股份有限公司

深圳市恒大创新科技有限公司

服务据点:香港深圳北京上海成都长沙东莞宁波

-------------------------------------------------------------------

联系人:侯顺涛销售主管Mobile:136********

主营业务:国际半导体通路产品方案及开发OEM/ODM制造

ADD:香港.新界.沙田火炭坳背湾街45-47喜利佳工业大厦10-O座

TEL:00852-63385528FAX:00852-26014125

ADD:深圳市福田区益田路3008号皇都广场A座1304-1305室(会展中心南侧)

TEL:86-755-88250080-8009FAX:86-755-88250089

Emial:houst@https://www.wendangku.net/doc/854832903.html, WEB:https://www.wendangku.net/doc/854832903.html,

MSN:houshuntao@https://www.wendangku.net/doc/854832903.html, QQ:228289156

-------------------------------------------------------------------

上善若水，水善利万物而不争。