Telefon: +49 (0) 6135 931069
Telefax: +49 (0) 6135 931070
www.peak-electronics.de
info@peak-electronics.de
MD SERIES P26TG-XXXXE2:1H35M 3.5 KV ISOLATED6 W REGULATED SINGLE OUTPUT DIP24 Available Inputs:
12, 24 and 48 VDC Wide Input 2:1
Available Outputs:
3.3, 5, 12, 15 and 18 VDC
Other specifications please enquire.
Electrical Specifications
(Typical at + 25° C, nominal input voltage, rated output current unless otherwise specified)
Input Specifications
Voltage range 9 -18 VDC (12 VDC), 18 - 36 VDC (24 VDC), 36 -
72 VDC (48 VDC)
Filter Pi
Network Isolation Specifications
Rated voltage 3500 Vdc
Leakage current 1 mA
Resistance 109 Ohm
Capacitance 120 pF typ.
Output Specifications
Voltage accuracy +/- 1 % typ. +/-2% max.
Ripple and noise (at 20 MHz BW) 60 mV p-p, max.
Short circuit protection Continuous , restart automatic
Line voltage regulation +/- 0,5 % max.
Load voltage regulation +/- 0,5 % max.
Temperature coefficient +/- 0,02 % / °C
General Specifications
Efficiency 70 % to 85 %
Switching frequency 250 KHz, typ.
Environmental Specifications
Operating temperature (ambient) -40°C to +85°C
Storage temperature - 55 °C to + 125 °C
Derating See
graph Humidity Up to 90 %, non condensing
Cooling Free air convection
Physical Characteristics
Dimensions 31,75 x 20,32 x 10,16 mm
1,25 x 0,80 x 0,40 inches
Weight 19,0
g
Case material Nickel Coated Copper
Examples of Partnumbers/Modelcode
PART NO.
INPUT
VOLTAGE
(VDC)
Nominal
INPUT
CURRENT
NO LOAD
INPUT
CURRENT
FULL
LOAD
OUTPUT
VOLTAGE
(VDC)
OUTPUT
CURRENT
(max. mA)
EFFICIENCY FULL
LOAD
(% TYP.)
P26TG-1205E2:1H35M 9-18 30 676 5 1200 74
P26TG-1212E2:1H35M
9-18 30 641 12 500 78 P26TG-2405E2:1H35M 18-36 29 333 5 1200 75
P26TG-2412E2:1H35M
18-36 29 320 12 500 78 P26TG-2415E2:1H35M
18-36 29 316 15 400 79 P26TG-4805E2:1H35M 36-72 28 167 5 1200 75
P26TG-4812E2:1H35M
36-72 26 158 12 500 79
MD SERIES
P26TG-XXXXE2:1H35M 3.5 KV ISOLATED 6 W REGULATED SINGLE OUTPUT DIP24
Dimensions
Specification can be changed without notice.
Copyright PEAK electronics GmbH
REV:2 / 09.2001