LM1-EPG1-01-N2中文资料

https://www.wendangku.net/doc/877983307.html,/ledlamps

Cree ? SMD LED

Model # LM -EPG -0 -N2

Data Sheet

120-degree, 3.2 x 2.7 mm, SMT LED in green color with water-transparent lens

Applications

Indicators Illuminations LCD Back Lights

Automobile Applications Pure-Green Color Displays

Absolute Maximum Ratings (T A

= 25°C)

Notes:

Pulse width ≤0.1 msec, duty ≤1/10.

Rth test condition: mounted on PCB FR4 (pad size ≥16 mm 2)

A

?????

1.2.

元器件交易网https://www.wendangku.net/doc/877983307.html,

F Lamps are sorted to luminous intensity (I V ) and dominant wavelength (λD ) bins shown. Orders for LM1-EPG1-01-N2 may be filled with any or all bins contained as below.

All luminous intensity (I V ) and dominant wavelength (λD ) values shown and specified are at I F

= 20 mA.

W2 or above W1

V2

V1

U2

Important Notes:

All ranks will be included per delivery; rank ratio will be based on the dice distribution.Tolerance of measurement of luminous intensity is ±10%.

Tolerance of measurement of the dominant wavelength is ±1 nm.Tolerance of measurement of V F is ±0.05 V .

Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” docu-ment.

Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.

Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED

product safely.

Do not handle the device by the SMD surface. Care must be taken to avoid damage to the SMD surface or the

interior of the device, which can be damaged by excessive force to the SMD surface.

1.2.3.4.5.6.7.8.540 nm

520 nm Dominant Wavelength (λD )

L u m i n o u s I n t e n s i t y (I V )

1400 mcd

1120 mcd

900 mcd

710 mcd

560 mcd

duty <=1/10 ** Rth test condition: Mounted on PC Board FR 4(pad size>=16mm) t i c a l C h a r a c t e r i s t i c s(T a=25°C)

Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color , forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options.

Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner:

* Contact your Cree sales representative for ordering information.

* Please contact your Cree representative about the availability of non-standard kits.

aaaaaaaaa-aaa-aa- x x x x x

Wd/Color

1: Full-color distribution 2~9, A~Z . . . : special request *I V

0: Full luminous intensity distribution 1~9, A~Z . . . : special request *

V F

0: Full forward voltage distribution 1~9, A~Z . . . : special request *

Packing type 0: Standard = tape pack

1~9, A~Z . . . : special request *

Standard/Custom

0: Standard C: Custom

Product P/N