shower set Procedure of Installation
Procedure of Installation
1.Discharge sewage form cold/hot water pipe
2.fit (1) in place and tighten (9);
3.measure the right height and sign , fit (1) to the
signed place
4.connect (1)(6)(8) ,tighten the nuts and hexagon
head screw
5.join (2) to (3) ; connect(1)(2)(3)
6.move (5)to the right place and put (4) to (5)
7. connect (4)(8) with a shower tube.
8.please check all O-rings in the right place .
Attentions
please check every connect parts whether leak water
don't let the ABS products touch something with 90
degree temperature for long time
below 1 degree temperature ,must close water source
and open the faucet to discharge the rest water .
It prevent the products being brocken by ice