Agilent
T-13/4 (5 mm), T-1 (3 mm),
High Intensity, Double Heterojunction AlGaAs Red LED Lamps
Data Sheet
HLMP-D101/D105, HLMP-K101/K105
Description
These solid state LED lamps utilize newly developed double
heterojunction (DH) AlGaAs/GaAs material technology. This LED material has outstanding light
output efficiency over a wide range
Features
? Exceptional brightness ? Wide viewing angle
? Outstanding material efficiency ? Low forward voltage ? CMOS/MOS compatible ? TTL compatible ? Deep red color
Applications
? Bright ambient lighting conditions ? Moving message panels ? Portable equipment ? General use
of drive currents. The color is deep red at the dominant
wavelength of 637 nanometres.These lamps may be DC or pulse driven to achieve desired light output.
Package Dimensions
A B C
Selection Guide
Luminous Intensity
Iv (mcd) at 20 mA2θ1/2[1]Package Package Description Device HLMP-Min.Typ.Max.Degree Outline T-1 3/4 Red Tinted Diffused D10135.270.0–65A
D101-J00xx35.270.0–65A
D101-JK0xx35.270.0112.865A
T-1 3/4 Red Untinted Non-diffused D105138.0240.0–24B
D105-M00xx138.0240.0–24B
D105-NO0xx200.0290.0580.024B
T-1 Red Tinted Diffused K10122.045.0–60C
K101-100xx22.045.0–60C
K101-IJ0xx22.045.070.460C
T-1 Red Untinted Non-diffused K10535.265.0–45C
K105-J00xx35.265.0–45C
K105-KL0xx56.4110.0180.445C
Note:
1. θ1/2 is the off axis angle from lamp centerline where the luminous intensity is 1/2 the on-axis value.
Part Numbering System
HLMP - x x xx - x x x xx
Mechanical Option
00: Bulk
01: Tape & Reel, Crimped Leads
02: Tape & Reel, Straight Leads
A1: Right Angle Housing, Uneven Leads, T1
A2: Right Angle Housing, Even Leads, T1
B1: Right Angle Housing, Uneven Leads, T-1 3/4
B2: Right Angle Housing, Even Leads, T-1 3/4
DD, UQ: Ammo Pack
Color Bin Options
0: Full Color Bin Distribution
Maximum Iv Bin Options
0: Open (no max. limit)
Others: Please refer to the Iv Bin Table
Minimum Iv Bin Options
Please refer to the Iv Bin Table
Lens Type
01: Tinted, Diffused
05: Untinted, Nondiffused
Color Options
1: AlGaAs Red
Package Options
D: T-1 3/4
K: T-1
Absolute Maximum Ratings at T A = 25°C
Parameter Value
Peak Forward Current[1,2]300 mA
Average Forward Current[2]20 mA
DC Current[3]30 mA
Power Dissipation87 mW
Reverse Voltage (I R = 100 μA) 5 V
Transient Forward Current (10 μs Pulse)[4]500 mA
LED Junction Temperature110°C
Operating Temperature Range-20 to +100°C Storage Temperature Range-55 to +100°C Wave Soldering Temperature [1.59 mm (0.063 in.) from body]250°C for 3 seconds Lead Solder Dipping Temperature [1.59 mm (0.063 in.) from body]260°C for 5 seconds Notes:
1.Maximum I PEAK at f = 1 kHz, DF = 6.7%.
2.Refer to Figure 6 to establish pulsed operating conditions.
3.Derate linearly as shown in Figure 5.
4.The transient peak current is the maximum non-recurring peak current the device can withstand without damaging the LED die and wire bonds. It is
not recommended that the device be operated at peak currents beyond the Absolute Maximum Peak Forward Current.
Electrical/Optical Characteristics at T A = 25°C
Symbol Description Min.Typ.Max.Unit Test Condition
V F Forward Voltage 1.8 2.2V I F = 20 mA
V R Reverse Breakdown Voltage 5.015.0V I R = 100 μA
λp Peak Wavelength645nm Measurement at Peak
λd Dominant Wavelength637nm Note 1
?λ1/2Spectral Line Halfwidth20nm
τS Speed of Response30ns Exponential Time
Constant, e-t/T S
C Capacitance30pF V F = 0, f = 1 MHz
RθJ-PIN Thermal Resistance260[3]°C/W Junction to Cathode Lead
210[4]
290[5]
ηV Luminous Efficacy80Im/W Note 2
Notes:
1.The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the color of the device.
2.The radiant intensity, I e, in watts per steradian, may be found from the equation I e = l V/ηV, where I V is the luminous intensity in candelas and ηV is
luminous efficacy in lumens/watt.
3.HLMP-D101.
4.HLMP-D10
5.
5.HLMP-K101/-K105.
Figure 3. Relative luminous intensity vs. dc forward current.Figure 4. Relative efficiency vs. peak forward current.
Figure 7. Relative luminous intensity vs. angular displacement. HLMP-D101.Figure 8. Relative luminous intensity vs. angular displacement. HLMP-K101.
Intensity Bin Limits
Intensity Range (mcd)
Color Bin Min.Max.
Red I24.839.6
J39.663.4
K63.4101.5
L101.5162.4
M162.4234.6
N234.6340.0
O340.0540.0
P540.0850.0
Q850.01200.0
R1200.01700.0
S1700.02400.0
T2400.03400.0
U3400.04900.0
V4900.07100.0
W7100.010200.0
X10200.014800.0
Y14800.021400.0
Z21400.030900.0
Maximum tolerance for each bin limit is ± 18%.
Mechanical Option Matrix
Mechanical Option Code Definition
00Bulk Packaging, minimum increment 500 pcs/bag
01Tape & Reel, crimped leads, minimum increment 1300 pcs (T-1 3/4)/1800 pcs (T-1) 02Tape & Reel, straight leads, minimum increment 1300 pcs (T-1 3/4)/1800 pcs (T-1) A1Right Angle Housing, uneven leads, minimum increment 500 pcs/bag
A2Right Angle Housing, even leads, minimum increment 500 pcs/bag
B1Right Angle Housing, uneven leads, minimum increment 500 pcs/bag
B2Right Angle Housing, even leads, minimum increment 500 pcs/bag
DD Ammo Pack, straight leads in 2K increment
UQ Ammo Pack, horizontal leads in 2K increment
Note:
All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent representative for further clarification/information.
https://www.wendangku.net/doc/8e13465837.html,/semiconductors For product information and a complete list of distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or (916) 788-6763
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 6756 2394
India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/Interna-tional), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989
Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843
Data subject to change.
Copyright ? 2004 Agilent Technologies, Inc. Obsoletes 5968-1440E
November 12, 2004
5988-2230EN