1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
Maximum Ratings and Electrical Characteristics
@ T A = 25°C unless otherwise specified
·Low Leakage Current
·Guard Ring Die Construction for Transient Protection
·Ideally Suited for Automatic Assembly ·Low Power Loss, High Efficiency ·Surge Overload Rating to 45A Peak ·
Lead Free/RoHS Compliant (Note 3)
·Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0
·Moisture Sensitivity: Level 1 per J-STD-020C ·Terminals: Lead Free Plating (Matte Tin Finish).Solderable per MIL-STD-202, Method 208 ·Marking Informaton: See page 3·Ordering Information: See page 3·Polarity: Cathode Band or Cathode Notch ·
Weight: 0.093 grams (approximate)
Single phase, half wave, 60Hz, resistive or inductive load.
Notes: 1. Thermal Resistance: Junction to terminal, unit mounted on PC board with 5.0 mm 2 (0.013 mm thick) copper pads as heat sink. 2. Measured at 1.0MHz and applied reverse voltage of 5.0V DC.
3. RoHS revision 13.2.2003. High Temperature Solder Exemption Applied, see EU Directive Annex Note 7.