comp-o-gide ?
Industry Standard Snap-in Card Guides for 1?16th PCBs
? 52 Configurations to meet most standard requirements
? Precision Molded for rigidity, strength and heat resistance from 94V-2 UL rated materials ? Stainless Steel Conductive Inserts available for all sizes (see page 13)
? Two channel depths and two channel widths available to accommodate 1?16th ,3?32nd PCBs ? Common industry standards interchange with competitive devices
https://www.wendangku.net/doc/954308069.html, 19cage code (FSCM) 32559? copyright 2004 Bivar https://www.wendangku.net/doc/954308069.html,P-O-GIDE, was introduced to provide second sources
for previously single source card guides. The series has
expanded to offer wider selection and application specific
function. Rigid, strong and economical, COMP-O-GIDEs
provide the installed reliability that your most demanding
products require. Retention is firm and there are no special
tools or fixtures required for installation.
Mounting Information:
Snap-in metal plates: 0.047"- 0.090" (1.2mm - 2.3mm) thick
Hole Size: 0.180" (4.6mm) diameter + 0.003" (0.08mm),
- 0.001" (0.03mm) 3/16th drill
Rear - 0.225" x 0.176" + 0.003" - 0.001"
Material Specifications:
UL Rated 94V-2, natural, 6/6 Nylon per ASTM D4066 PA111
Oxygen Index: +28%
UL File #E135532
Application Notes:
Slotting or elongating of the second mounting hole is
recommended to allow for length variations and to
provide for easier assembly.
Prolonged pre-assembly exposure to high humidity can
cause molded Nylon components to “grow” out of
tolerance. Storage in a cool dry place is recommended.
Open sealed vapor barrier bags at the time of production
to assure optimum shelf life. A
B Part No.±.031(.79)
±.016 (.41)SDC-250 2.5 (63.5)
1.5 (38.1)SDC-300 3.0 (76.2)
2.0 (50.8)SDC-350
3.5 (88.9)
2.5 (6
3.5)SDC-400
4.0 (101.6)
3.0 (76.2)SDC-450
4.5 (114.3)
3.5 (88.9)SDC-500 5.0 (127.0)
4.0 (101.6)SDC-550
5.5 (139.7)
4.5 (114.3)SDC-600 6.0 (152.4)
5.0 (127.0)SDC-650
6.5 (165.1)
5.5 (139.7)SDC-7007.0 (177.8)
6.0 (152.4)SDC-750
7.5 (190.5)
6.5 (165.1)SDC-800
8.0 (203.2)7.0 (177.8)SDC Series
For 1/16th PCBs, 2-1/2" thru 8" Lengths
Recommended Mounting Holes