Reel Diameter Reel Width X Y Z 360 mm 24.4 mm344 mm350 mm152 mm
3002 (6 contacts - PCB locating pegs)
3004 (8 contacts - PCB locating pegs)
3009 (6 contacts - lock with bump)
Open
With pegs*
Without pegs
Notes: Coplanarity of soldering surfaces: ±0.05 mm
*Pegs: Height 0.7 mm and ? 1 mm
PCB Layout
CCM03-3001 / 3002 / 3009CCM03-3003 / 3004
1. Mounting pegs only available with CCM03-3002 / 3004
Unless otherwise stated, tolerances are ±0.10 mm
Dimensions are shown in mm
Hinged Cover CCM03 - 3005 (6 contacts - with stand off 1.90 mm)
Open
Note: Coplanarity of soldering surfaces: ±0.05 mm
PCB Layout
CCM03-3005
Unless otherwise stated, tolerances are ±0.10 mm
Dimensions are shown in mm
Hinged Cover CCM03 - 3006 (6 contacts - with locating pegs 1.90 mm)
Open
Note: Coplanarity of soldering surfaces: ±0.05 mm
PCB Layout
CCM03-3006
Unless otherwise stated, tolerances are ±0.10 mm
Dimensions are shown in mm
Hinged Cover CCM03 - 3007 (8 contacts - with stand off 1.90 mm)
Open
Note: Coplanarity of soldering surfaces: ±0.05 mm
PCB Layout
CCM03-3007
Unless otherwise stated, tolerances are ±0.10 mm
Dimensions are shown in mm
Hinged Cover CCM03-3008 (8 contacts - with locating pegs 1.90 mm)
Open
Note: Coplanarity of soldering surfaces: ±0.05 mm
PCB Layout
CCM03-3008
Unless otherwise stated, tolerances are ±0.10 mm
Dimensions are shown in mm
Note: Coplanarity of soldering surfaces: ±0.05 mm
PCB Layout
CCM03-3013
Unless otherwise stated, tolerances are ±0.10 mm
Dimensions are shown in mm
Note: Coplanarity of soldering surfaces: ±0.05 mm
PCB Layout
CCM03-3505CCM03-3504
Unless otherwise stated, tolerances are ±0.10 mm
Dimensions are shown in mm
Hinged Cover CCM03-3512 (6 contacts)
Note: Coplanarity of soldering surfaces: ±0.05 mm
PCB Layout
CCM03-3512
Unless otherwise stated, tolerances are ±0.10 mm
Dimensions are shown in mm
Note: Coplanarity of soldering surfaces: ±0.05 mm
PCB Layout
CCM03-3514
Unless otherwise stated, tolerances are ±0.10 mm
Dimensions are shown in mm
CCM03 MK II with Auto Lock cover
Construction
Hinged Cover CCM03-3517 (6 contacts)
OPEN
Note: Coplanarity of soldering surfaces: ±0.05 mm
PCB Layout
CCM03-3517
Unless otherwise stated, tolerances are ±0.10 mm
Hinged Cover CCM03-3518 (6 contacts)
OPEN
Note: Coplanarity of soldering surfaces: ±0.05 mm
PCB Layout
CCM03-3518
Unless otherwise stated, tolerances are ±
CCM03 – 3753 / 3757CCM03 – 3752 / 3754 / 3758
PCB Layout
CCM03 – 3752 / 3753 / 3754CCM03 – 3757 / 3758
Dimensions are shown in mm