机械类英语论文及翻译

Mechanical Design

Abstract:A machine is a combination of mechanisms and other components which transforms, transmits. Examples are engines, turbines, vehicles, hoists, printing presses, washing machines, and movie cameras. Many of the principles and methods of design that apply to machines also apply to manufactured articles that are not true machines. The term "mechanical design" is used in a broader sense than "machine design" to include their design. the motion and structural aspects and the provisions for retention and enclosure are considerations in mechanical design. Applications occur in the field of mechanical engineering, and in other engineering fields as well, all of which require mechanical devices, such as switches, cams, valves, vessels, and mixers.

Keywords: Mechanical Design ；Rules for Design ；Design Process

The Design Process

Designing starts with a need real.Existing apparatus may need improvements in durability, efficiency, weight, speed, or cost. New apparatus may be needed to perform a function previously done by men, such as computation, assembly, or servicing. With the objective wholly or partly.

In the design preliminary stage, should allow to design the personnel fully

to display the creativity, not each kind of restraint. Even if has had many impractical ideas, also can in the design early time, namely in front of the plan blueprint is corrected. Only then, only then does not send to stops up the innovation the mentality. Usually, must propose several sets of design proposals, then perform the comparison. Has the possibility very much in the plan which finally designated, has used certain not in plan some ideas which accepts.

When the general shape and a few dimensions of the several components become apparent, analysis can begin in earnest. The analysis will have as its objective satisfactory or superior performance, plus safety and durability with minimum weight, and a competitive cost. Optimum proportions and dimensions will be sought for each critically loaded section, together with a balance between the strengths of the several components. Materials and their treatment will be chosen. These important objectives can be attained only by analysis based upon the principles of mechanics, such as those of static for reaction forces and for the optimum utilization of friction; of dynamics for inertia, acceleration, and energy; of elasticity and strength of materials for stress and deflection; of physical behavior of materials; and of fluid mechanics for lubrication and hydrodynamic drives. The analyses may be made by the same engineer who conceived the arrangement of mechanisms, or, in a large company, they may be made by a separate analysis division or research group. Design is a reiterative and cooperative process, whether

done formally or informally, and the analyst can contribute to phases other than his own. Product design requires much research and development. Many Concepts of an idea must be studied, tried, and then either used or discarded. Although the content of each engineering problem is unique, the designers follow the similar process to solve the problems.

Product liability suits designers and forced in material selection, using the best program. In the process of material, the most common problems for five (a) don't understand or not use about the latest application materials to the best information, (b) failed to foresee and consider the reasonable use material may (such as possible, designers should further forecast and consider due to improper use products. In recent years, many products liability in litigation, the use of products and hurt the plaintiff accused manufacturer, and won the decision), (c) of the materials used all or some of the data, data, especially when the uncertainty long-term performance data is so, (d) quality control method is not suitable and unproven, (e) by some completely incompetent persons choose materials.

Through to the above five questions analysis, may obtain these questions is does not have the sufficient reason existence the conclusion. May for avoid these questions to these questions research analyses the appearance indicating the direction. Although uses the best choice of material method not to be able to avoid having the product responsibility lawsuit, designs the personnel and the industry carries on the choice of material according to the

suitable procedure, may greatly reduce the lawsuit the quantity.

May see from the above discussion, the choice material people should to the material nature, the characteristic and the processing method have comprehensive and the basic understanding.

Finally, a design based upon function, and a prototype may be built. If its tests are satisfactory, the initial design will undergo certain modifications that enable it to be manufactured in quantity at a lower cost. During subsequent years of manufacture and service, the design is likely to undergo changes as new ideas are conceived or as further analyses based upon tests and experience indicate alterations. Sales appeal.

Some Rules for Design

In this section it is suggested that, applied with a creative attitude, analyses can lead to important improvements and to the conception and perfection of alternate, perhaps more functional, economical,

and durable products.

To stimulate creative thought, the following rules are suggested for the designer and analyst. The first six rules are particularly applicable for the analyst.

1. A creative use of need of physical properties and control process.

2. Recognize functional loads and their significance.

3. Anticipate unintentional loads.

4. Devise more favorable loading conditions.

5. Provide for favorable stress distribution and stiffness with minimum weight.

6. Use basic equations to proportion and optimize dimensions.

7. Choose materials for a combination of properties.

8. Select carefully, stock and integral components.

9. Modify a functional design to fit the manufacturing process and reduce cost.

10. Provide for accurate location and noninterference of parts in assembly.

Machinery design covers the following contents.

1. Provides an introduction to the design process , problem formulation ,safety factors.

2. Reviews the material properties and static and dynamic loading analysis ,

Including beam , vibration and impact loading.

3. Reviews the fundamentals of stress and defection analysis.

4. Introduces fatigue-failure theory with the emphasis on stress-life approaches to high-cycle fatigue design, which is commonly used in the design of rotation machinery.

5. Discusses thoroughly the phenomena of wear mechanisms, surface contact stresses ,and surface fatigue.

6. Investigates shaft design using the fatigue-analysis techniques.

7. Discusses fluid-film and rolling-element bearing theory and application

8. Gives a thorough introduction to the kinematics, design and stress analysis of spur gears , and a simple introduction to helical ,bevel ,and worm gearing.

9. Discusses spring design including compression ,extension and torsion springs.

10. Deals with screws and fasteners including power screw and preload fasteners.

11. Introduces the design and specification of disk and drum clutches and brakes.

Machine Design

The complete design of a machine is a complex process. The machine design is a creative work. Project engineer not only must have the creativity in the work, but also must in aspect and so on mechanical drawing, kinematics, engineerig material, materials mechanics and machine manufacture technology has the deep elementary knowledge.

One of the first steps in the design of any product is to select the material from which each part is to be made. Numerous materials are available to today's designers. The function of the product, its appearance, the cost of the

material, and the cost of fabrication are important in making a selection. A careful evaluation of the properties of a. material must be made prior to any calculations.

Careful calculations are necessary to ensure the validity of a design. In case of any part failures, it is desirable to know what was done in originally designing the defective components. The checking of calculations (and drawing dimensions) is of utmost importance. The misplacement of one decimal point can ruin an otherwise acceptable project. All aspects of design work should be checked and rechecked.

The computer is a tool helpful to mechanical designers to lighten tedious calculations, and provide extended analysis of available data. Interactive systems, based on computer capabilities, have made possible the concepts of computer aided design (CAD) and computer-aided manufacturing (CAM). How does the psychologist frequently discuss causes the machine which the people adapts them to operate. Designs personnel''s basic responsibility is diligently causes the machine to adapt the people. This certainly is not an easy work, because certainly does not have to all people to say in fact all is the most superior operating area and the operating process. Another important question, project engineer must be able to carry on the exchange and the consultation with other concerned personnel. In the initial stage, designs the personnel to have to carry on the exchange and the consultation on the preliminary design with the administrative personnel, and is approved.

This generally is through the oral discussion, the schematic diagram and the writing material carries on.

If front sues, the machine design goal is the production can meet the human need the product. The invention, the discovery and technical knowledge itself certainly not necessarily can bring the advantage to the humanity, only has when they are applied can produce on the product the benefit. Thus, should realize to carries on before the design in a specific product, must first determine whether the people do need this kind of product

Must regard as the machine design is the machine design personnel carries on using creative ability the product design, the system analysis and a formulation product manufacture technology good opportunity. Grasps the project elementary knowledge to have to memorize some data and the formula is more important than. The merely service data and the formula is insufficient to the completely decision which makes in a good design needs. On the other hand, should be earnest precisely carries on all operations. For example, even if places wrong a decimal point position, also can cause the correct design to turn wrongly.

A good design personnel should dare to propose the new idea, moreover is willing to undertake the certain risk, when the new method is not suitable, use original method. Therefore, designs the personnel to have to have to have the patience, because spends the time and the endeavor certainly

cannot guarantee brings successfully. A brand-new design, the request screen abandons obsoletely many, knows very well the method for the people. Because many person of conservativeness, does this certainly is not an easy matter. A mechanical designer should unceasingly explore the improvement existing product the method, should earnestly choose originally, the process confirmation principle of design in this process, with has not unified it after the confirmation new idea.

外文论文翻译译文

机械设计

摘要：机器是由机械装置和其它组件组成的。它是一种用来转换或传递能量的装置，例如：发动机、涡轮机、车辆、起重机、印刷机、洗衣机、照相机和摄影机等。许多原则和设计方法不但适用于机器的设计，也适用于非机器的设计。术语中的“机械装置设计”的含义要比“机械设计”的含义更为广泛一些，机械装置设计包括机械设计。在分析运动及设计结构时，要把产品外型以及以后的保养也要考虑在机械设计中。在机械工程领域中，以及其它工程领域中，所有这些都需要机械设备，比如：开关、凸轮、阀门、船舶以及搅拌机等。

关键词：设计流程；设计规则；机械设计

设计流程

设计开始之前就要想到机器的实际性，现存的机器需要在耐用性、效率、重量、速度，或者成本上得到改善。新的机器必需具有以前机器所能执行的功能。

在设计的初始阶段，应该允许设计人员充分发挥创造性，不要受到任何约束。即使产生了许多不切实际的想法，也会在设计的早期，即在绘制图纸之前被改正掉。只有这样，才不致于阻断创新的思路。通常,还要提出几套设计方案，然后加以比较。很有可能在这个计划最后决定中,使用了某些不在计划之内的一些设想。

一般的当外型特点和组件部分的尺寸特点分析得透彻时，就可以全面的设计和分析。接着还要客观的分析机器性能的优越性，以及它的安全、重量、耐用性，并且竞争力的成本也要考虑在分析结果之内。每一个至关重要的部分要优化它的比例和尺寸，同时也要保持与其它组成部分相协调。

也要选择原材料和处理原材料的方法。通过力学原理来分析和实现这些重要的特性，如那些静态反应的能量和摩擦力的最佳利用，像动力惯性、加速动力和能量；包括弹性材料的强度、应力和刚度等材料的物理特性，以及流体润滑和驱动器的流

体力学。设计的过程是重复和合作的过程，无论是正式或非正式的进行，对设计者来说每个阶段都很重要。

最后，以图样为设计的标准，并建立将来的模型。如果它的测试是符合事先要求的，则再将对初步设计进行某些修改，使它能够在制造成本上有所降低。产品的设计需要不断探索和发展。许多方案必须被研究、试验、完善，然后决定使用还是放弃。虽然每个工程学问题的内容是独特的，但是设计师可以按照类似的步骤来解决问题。

产品的责任诉讼迫使设计人员和公司在选择材料时，采用最好的程序。在材料过程中，五个最常见的问题为：（a）不了解或者不会使用关于材料应用方面的最新最好的信息资料；(b)未能预见和考虑材料的合理用途（如有可能，设计人员还应进一步预测和考虑由于产品使用方法不当造成的后果。在近年来的许多产品责任诉讼案件中，由于错误地使用产品而受到伤害的原告控告生产厂家，并且赢得判决）；

(c)所使用的材料的数据不全或是有些数据不确定，尤其是当其性能数据长期不更新；(d)质量控制方法不适当和未经验证；(e)由一些完全不称职的人员选择材料。

通过对上述五个问题的分析，可以得出这些问题是没有充分理由而存在的结论。对这些问题的研究分析可以为避免这些问题的出现而指明方向。尽管采用最好的材料选择方法也不能避免发生产品责任诉讼，设计人员和工业界按照适当的程序进行材料选择，可以大大减少诉讼的数量。

从以上的讨论可以看出，选择材料的人们应该对材料的性质，特点和加工方法有一个全面而基本的了解。

在随后生产和售后服务的几年中，要接受新观念的变化，或者由试验和经验为基础，进一步分析并改进。

一些设计规则

在本节中，建议要运用创造性的态度来替代和改进。也许会创造出更实用、更经济、更耐用的产品。

为了激发创造性思维，下列是设计和分析的建议规则。前六个规则对设计者来说特别适用。

1.要有创造性的利用所需要的物理性质和控制过程。

2.认识负载产生的影响及其意义。

3.预测没有想到的负载。

4.创造出对载荷更为有利的条件。

5.提供良好的应力分布和最小的刚度条件。

6.运用最简单的方程来优化体积和面积。

7.选择组合材料。

8.仔细选择所备的原料和不可缺少的组件。

9.调整有效的设计方案，以适应生产过程和降低成本。

10.规定好准确的位置条件为了使组件安装时不干涉。

机械设计包括一下内容：

1.对设计过程、设计所需要公式以及安全系数进行介绍。

2.回顾材料特性、静态和动态载荷分析，包括梁、振动和冲击载荷。

3.回顾应力的基本规律和失效分析。

4.介绍静态失效理论和静态载荷下机械断裂分析。

5.介绍疲劳失效理论并强调在压力条件下接近高循环的疲劳设计，这通常用在旋转机械的设计中。

6.深入探讨机械磨损机理、表面接触应力和表面疲劳现象。

7.使用疲劳分析技术校核轴的设计。

8.讨论润滑油膜与滚动轴承的理论和应用。

9.深入介绍直齿圆柱齿轮的动力学、设计和应力分析，并简单介绍斜齿轮、锥齿轮和涡轮有关方面的问题。

10.讨论弹簧设计、螺杆等紧固件的设计，包括传动螺杆和预紧固件。

11.介绍盘式和鼓式离合器以及制动器的设计和技术说明。

机械设计

一台完整机器的设计是一个复杂的过程。机械设计是一项创造性的工作。设计工程师不仅在工作上要有创造性，还必须在机械制图、运动学、工程材料、材料力学和机械制造工艺学等方面具有深厚的基础知识。

任何产品在设计时第一步就是选择产品每个部分的构成材料。许多的材料被今

天的设计师所使用。对产品的功能，它的外观、材料的成本、制造的成本作出必要的选择是十分重要的。对材料的特性必须事先作出仔细的评估。

仔细精确的计算是必要的，以确保设计的有效性。在任何失败的情况下，最好知道在最初设计中有有缺陷的部件。计算（图纸尺寸）检查是非常重要的。一个小数点的位置放错，就可以导致一个本可以完成的项目失败。设计工作的各个方面都应该检查和复查。

计算机是一种工具，它能够帮助机械设计师减轻繁琐的计算，并对现有数据提供进一步的分析。互动系统基于计算机的能力，已经使计算机辅助设计（CAD）和计算机辅助制造（CAM）成为了可能。心理学家经常谈论如何使人们适应他们所操作的机器。设计人员的基本职责是努力使机器来适应人们。这并不是一项容易的工作，因为实际上并不存在着一个对所有人来说都是最优的操作范围和操作过程。另一个重要问题，设计工程师必须能够同其他有关人员进行交流和磋商。在开始阶段，设计人员必须就初步设计同管理人员进行交流和磋商，并得到批准。这一般是通过口头讨论，草图和文字材料进行的。

如前所诉，机械设计的目的是生产能够满足人类需求的产品。发明、发现和科技知识本身并不一定能给人类带来好处，只有当它们被应用在产品上才能产生效益。因而，应该认识到在一个特定的产品进行设计之前，必须先确定人们是否需要这种产品。

应当把机械设计看成是机械设计人员运用创造性的才能进行产品设计、系统分析和制定产品的制造工艺学的一个良机。掌握工程基础知识要比熟记一些数据和公式更为重要。仅仅使用数据和公式是不足以在一个好的设计中做出所需的全部决定的。另一方面，应该认真精确的进行所有运算。例如，即使将一个小数点的位置放错，也会使正确的设计变成错误的。

一个好的设计人员应该勇于提出新的想法，而且愿意承担一定的风险，当新的方法不适用时，就使用原来的方法。因此，设计人员必须要有耐心，因为所花费的时间和努力并不能保证带来成功。一个全新的设计，要求屏弃许多陈旧的，为人们所熟知的方法。由于许多人墨守成规，这样做并不是一件容易的事。一位机械设计师应该不断地探索改进现有的产品的方法，在此过程中应该认真选择原有的、经过验证的设计原理，将其与未经过验证的新观念结合起来。

新设计本身会有许多缺陷和未能预料的问题发生，只有当这些缺陷和问题被解

决之后，才能体现出新产品的优越性。因此，一个性能优越的产品诞生的同时，也伴随着较高的风险。应该强调的是，如果设计本身不要求采用全新的方法，就没有必要仅仅为了变革的目的而采用新方法。

英语翻译专业毕业论文选题

“论文学翻译过程” “语义翻译和交际翻译理论在英汉翻译中的运用” “英语句子成分的省略及汉译” “文学翻译中隐喻的传译” 一、选题范围 1、翻译与文化：可以从宏观和微观两个方面考虑。宏观方面，一般从翻译在目的 语社会文化中的生产、接受、翻译在目的语社会文化中所起的功能等角度讨论， 可以从社会、文化、历史、交际的视角切入。阐述为什么有那样的译文？如严复的翻译，林纾的翻译，傅东华翻译《漂》时为什么使用归化的手段，鲁迅翻译的策略，翻译材料的选择等等。微观方面，可以讨论语言文字所承载的文化内容和内涵如 何在翻译中表达，如文化负载词的翻译策略等。 2、翻译与语言学理论：可以从篇章语言学，功能语言学（如喊韩礼德的系统功 能理论等），对比语言学，心理语言学，交际语言学、文化语言学等方面考虑选题。如功能语言学和篇章语言学中讨论的衔接与连贯及其翻译，也可以讨论他们在英语和汉语中的差别入手，进一步讨论他们在翻译中的处理，主位、述位的推进极其在翻译中的体现。英语汉语对比及其翻译策略等等。 3、翻译与语文学。主要从艺术的角度讨论文学翻译中的问题。 4、应用翻译：主要从特殊用途英语如商务英语、科技英语、旅游英语等方面 讨论在这些特殊领域中涉及的翻译问题如何处理。如旅游宣传资料的翻译等。 5、译文对比：可以是同一篇文章、同一本书，不同的译者在同以时期或不同时 期进行的翻译做的对比，也可以是同一个译者对同一篇文章或书在不同时期的翻 译的对比；可以是翻译技巧等微观层面的对比，也可以是宏观曾面的对比，以探索为什么在不同时期译者回采取不同的策略，有哪些社会的、文化的、政治的、 意识形态的原因？ 6、翻译及评论：首先选择一篇长文，一般是文学作品且没有人翻译过，进行 翻译，翻译完后，从上述五个方面选择一个理论视角对自己的翻译进行评论。 7、译者风格。 8、翻译与美学。 二、选题方法： 上述各个方面均可写出几本甚至几十本专著，因此大家从上述方面可以选出一个写作的范围。缩小选题范围：首先是广泛浏览上述各有关方面翻译研究资料，以确定自己对哪方面感兴趣且有话可说，这是缩小范围的第一步。然后在自己感兴

先进制造技术的新发展——机械类外文文献翻译、中英文翻译

外文原文： The new advanced manufacturing technology development Abstract : This paper has presented the problems facing today's manufacturing technology, advanced manufacturing discussed in the forefront of science, and a vision for the future development of advanced manufacturing technology. Keyword：Advanced manufacturing technologies; Frontier science; Applications prospects Modern manufacturing is an important pillar of the national economy and overall national strength and its GDP accounted for a general national GDP 20%~55%. In the composition of a country's business productivity, manufacturing technology around 60% of the general role. Experts believe that the various countries in the world economic competition, mainly manufacturing technology competition. Their competitiveness in the production of the final product market share. With the rapid economic and technological development and customer needs and the changing market environment, this competition is becoming increasingly fierce, and that Governments attach great importance to the advanced manufacturing technology research. 1 .Current manufacturing science to solve problems Manufacturing science to solve the current problems focused on the following aspects : (1) Manufacturing systems is a complex systems, and manufacturing systems to meet both agility, rapid response and rapid reorganization of the capacity to learn from the information science, life science and social science interdisciplinary research, and explore new manufacturing system architecture, manufacturing models and manufacturing systems effective operational mechanism. Manufacturing systems optimized organizational structure and good performance is manufacturing system modelling, simulation and optimization of the main objectives. Manufacturing system architecture not only to create new enterprises both agility and responsiveness to the

机械专业外文翻译(中英文翻译)

外文翻译 英文原文 Belt Conveying Systems Development of driving system Among the methods of material conveying employed，belt conveyors play a very important part in the reliable carrying of material over long distances at competitive cost．Conveyor systems have become larger and more complex and drive systems have also been going through a process of evolution and will continue to do so．Nowadays，bigger belts require more power and have brought the need for larger individual drives as well as multiple drives such as 3 drives of 750 kW for one belt(this is the case for the conveyor drives in Chengzhuang Mine)．The ability to control drive acceleration torque is critical to belt conveyors’performance．An efficient drive system should be able to provide smooth，soft starts while maintaining belt tensions within the specified safe limits．For load sharing on multiple drives．torque and speed control are also important considerations in the drive system’s design. Due to the advances in conveyor drive control technology，at present many more reliable．Cost-effective and performance-driven conveyor drive systems covering a wide range of power are available for customers’ choices[1]. 1 Analysis on conveyor drive technologies 1．1 Direct drives Full-voltage starters．With a full-voltage starter design，the conveyor head shaft is direct-coupled to the motor through the gear drive．Direct full-voltage starters are adequate for relatively low-power, simple-profile conveyors．With direct fu11-voltage starters．no control is provided for various conveyor loads and．depending on the ratio between fu11-and no-1oad power requirements，empty starting times can be three or four times faster than full load．The maintenance-free starting system is simple，low-cost and very reliable．However, they cannot control starting torque and maximum stall torque；therefore．they are

浅谈商务英语的特点及英译汉翻译技巧-商务英语专业毕业论文

浅谈商务英语的特点及英译汉翻译技巧 目录 中文摘要 (1) 英文摘要 (2) 提纲 (3) 正文 (4) 参考文献 (8)

浅谈商务英语的特点及英译汉翻译技巧 摘要：随着世界经济一体化的不断深化和扩展，国际商务活动日益频繁，商务英语的作用也变得日益显著，本文以商务英语作为实用英语语言工具的角度，对其显著的特点以及对应的英译汉翻译技巧进行简要分析，这有助于人们更好地学习商务英语，更好地进行商务沟通，取得国际经济贸易的成功。 关键词:商务英语；特点；英译汉；翻译技巧

On the Study of the Characteristic of Business English and Its E-C Translation Skills Abstract:As the world continues to deepen economic integration and expansion of international business having become increasingly frequent, the role of Business English is becoming increasingly significant, the paper business English as a practical tool for English language point of view.Its significant features, as well as the English translation of the corresponding Chinese translation skills to carry out a brief analysis, which helps business people to learn better English, better for business communication, international economic and trade success. Key words: business English; features; English-Chinese translation; translation skills

英语专业本科毕业论文格式 翻译实践类

SCHOOL OF FOREIGN STUDIES SOUTH CHINA NORMAL UNIVERSITY A Report on the Translation of … --Reflections based on Dynamic Equivalence Theory 对……的翻译报告：基于动态等值理论的思考 by Zhang Zehao Supervised by Prof. Zhu Qifeng A senior thesis submitted to School of Foreign Studies, South China Normal University in partial fulfillment of the requirements for the degree of Bachelor of Arts JUNE, 2014

Declaration of Authorship

ABSTRACT This report is on the t ranslation of … . It is the author’s translation reflections and discussions based on Dynamic Equivalence Theory. …Three case studies are offered … The present report shows that … This report offers some suggestions for future translation practitioners… Key words: the first; the second; the third

机械类英语论文及翻译翻译

High-speed milling High-speed machining is an advanced manufacturing technology, different from the traditional processing methods. The spindle speed, cutting feed rate, cutting a small amount of units within the time of removal of material has increased three to six times. With high efficiency, high precision and high quality surface as the basic characteristics of the automobile industry, aerospace, mold manufacturing and instrumentation industry, such as access to a wide range of applications, has made significant economic benefits, is the contemporary importance of advanced manufacturing technology. For a long time, people die on the processing has been using a grinding or milling EDM (EDM) processing, grinding, polishing methods. Although the high hardness of the EDM machine parts, but the lower the productivity of its application is limited. With the development of high-speed processing technology, used to replace high-speed cutting, grinding and polishing process to die processing has become possible. To shorten the processing cycle, processing and reliable quality assurance, lower processing costs. 1 One of the advantages of high-speed machining High-speed machining as a die-efficient manufacturing, high-quality, low power consumption in an advanced manufacturing technology. In conventional machining in a series of problems has plagued by high-speed machining of the application have been resolved. 1.1 Increase productivity High-speed cutting of the spindle speed, feed rate compared withtraditional machining, in the nature of the leap, the metal removal rate increased 30 percent to 40 percent, cutting force reduced by 30 percent, the cutting tool life increased by 70% . Hardened parts can be processed, a fixture in many parts to be completed rough, semi-finishing and fine, and all other processes, the complex can reach parts of the surface quality requirements, thus increasing the processing productivity and competitiveness of products in the market. 1.2 Improve processing accuracy and surface quality High-speed machines generally have high rigidity and precision, and other characteristics, processing, cutting the depth of small, fast and feed, cutting force low, the workpiece to reduce heat distortion, and high precision machining, surface roughness small. Milling will be no high-speed processing and milling marks the surface so that the parts greatly enhance the quality of the surface. Processing Aluminum when up Ra0.40.6um, pieces of steel processing at up to Ra0.2 ~ 0.4um.

医学论文英语翻译技巧

医学论文英语摘要的写作及难句翻译 [摘要] 2.1 文章标题文章标题具备信息功能（提供文章的主要内容）、祈使功能（吸引读者阅读和购买）、美感功能（简单明了、新颖、醒目）和检索功能（方便读者和科技工作者检索、查阅及引用）。 2.2 语态在英语中却常常采用第三人称的被动语态。 2.3 时态：一般现在时和一般过去时，偶尔也会出现完成时。 结论”中的一句，是论文作者对研究工作进行的总结，并指出其对当前实际工作的指导意义，因此使用的是一般现在时。当然，使用何种时态不能一概而论。在翻译时，要根据原文中所要表达的意思来最后确定。 3 长、难句的翻译 不管是英语还是汉语医学文章，都有一个共同的特点，即它们的句子通常较长，结构较复杂，有时，长长的一段文字仅由一句话组成。在医学论文摘要中更是如此，要做好它们的互译还真不容易。这是因为汉语句子建构在意念主轴(thought?pivot)上'英语句子建构在形式（或主谓）主轴(form?pivot or subject? predict?pivot)上。也就是说，虽然句子是表达完整意义的语言单位，汉语强调的是意义，不太强调句子结构，许多句子没有主语，还有的句子主语不明显，但意义是明确的；而英语句子特别强调句子结构，绝大多数句子需要主语和谓语。这就要求在汉译英过程中注意句意的转换，学会抓找中心词和使用英语中的各个关联词。请看下列例子 例1：“以BPDE诱导恶性转化的人支气管上皮细胞株16HBE为模型，采用cDNA代表性差异分析方法，比较转化细胞及正常对照细胞间基因表达的差异，分离恶变细胞中差异表达的cDNA片段。”翻译：The malignant transformation of human bronchial cell line 16HBE induced by BPDE was used as a m odel for comparing gene expression between the transformed cells and controls. cDNA representational difference analysis was performed to isolate differentially expressed cDNA fragment in transformed cell s.分析：在中文原句中，出现了“以……”、“采用……”以及“比较……”、“分离……”这两个看似并列的机构'如果按照原文翻译'就会不知所云。因此，根据句意和英语的句子结构，将原文分成两层意思，按照两个句子去翻译。在第一层意思中，“上皮细胞株”在句中是中心词，但在实际翻译中，应通过所有格形式将“恶性转化”处理为中心词。翻译时，将它们的位置颠倒过来，并且为了保持和中文“以…”结构相一致，使用了被动语态。第二层意思中，“c DNA代表性差异分析方法”是中心词。其他结构按照英文习惯出现，层次分明，出落自然，毫无累赘之感。 例2：“这些感受器是神经末梢，它们嵌入血管壁，根据该血管扩张的程度发出冲动。”翻译：These r eceptors are nerve endings that discharge impulses according to the extent of stretch in the wall of the vessels in which they are imbedded.分析：原文虽然不是太长'但如果按照中文结构去译'就显得很幼稚。因此'就应使用英语中的各个关联词及关联结构。本句中采用的是定语分译法'即用一个主句带上一个定语从句'该定语从句又带上它自己的定语从句'这不仅符合英文习惯'而且逻辑性很强。整个译文层次明晰、流畅自然。以上是笔者在工作中的一些探索'希望能对进行医学论文英语摘要写作的医务工作者有所启发。 翻译的等效性和灵活性 1. 正确理解“等效翻译”

机械类数控车床外文翻译外文文献英文文献车床.doc

Lathes Lathes are machine tools designed primarily to do turning, facing and boring, Very little turning is done on other types of machine tools, and none can do it with equal facility. Because lathes also can do drilling and reaming, their versatility permits several operations to be done with a single setup of the work piece. Consequently, more lathes of various types are used in manufacturing than any other machine tool. The essential components of a lathe are the bed, headstock assembly, tailstock assembly, and the leads crew and feed rod. The bed is the backbone of a lathe. It usually is made of well normalized or aged gray or nodular cast iron and provides s heavy, rigid frame on which all the other basic components are mounted. Two sets of parallel, longitudinal ways, inner and outer, are contained on the bed, usually on the upper side. Some makers use an inverted V-shape for all four ways, whereas others utilize one inverted V and one flat way in one or both sets, They are precision-machined to assure accuracy of alignment. On most modern lathes the way are surface-hardened to resist wear and abrasion, but precaution should be taken in operating a lathe to assure that the ways are not damaged. Any inaccuracy in them usually means that the accuracy of the entire lathe is destroyed. The headstock is mounted in a foxed position on the inner ways, usually at the left end of the bed. It provides a powered means of rotating the word at various speeds . Essentially, it consists of a hollow spindle, mounted in accurate bearings, and a set of transmission gears-similar to a truck transmission—through which the spindle can be rotated at a number of speeds. Most lathes provide from 8 to 18 speeds, usually in a geometric ratio, and on modern lathes all the speeds can be obtained merely by moving from two to four levers. An increasing trend is to provide a continuously variable speed range through electrical or mechanical drives. Because the accuracy of a lathe is greatly dependent on the spindle, it is of heavy construction and mounted in heavy bearings, usually preloaded tapered roller or ball types. The spindle has a hole extending through its length, through which long bar stock can be fed. The size of maximum size of bar stock that can be machined when the material must be fed through spindle. The tailsticd assembly consists, essentially, of three parts. A lower casting fits on the inner ways of the bed and can slide longitudinally thereon, with a means for clamping the entire assembly in any desired location, An upper casting fits on the lower one and can be moved transversely upon it, on some type of keyed ways, to permit aligning the assembly is the tailstock quill. This is a hollow steel cylinder, usually about 51 to 76mm(2to 3 inches) in diameter, that can be moved several inches longitudinally in and out of the upper casting by means of a hand wheel and screw. The size of a lathe is designated by two dimensions. The first is known as the swing. This is the maximum diameter of work that can be rotated on a lathe. It is approximately twice the distance between the line connecting the lathe centers and the nearest point on the ways, The second size dimension is the maximum distance between centers. The swing thus indicates the maximum work piece diameter that can be turned in the lathe, while the distance between centers indicates the maximum length of work piece that can be mounted between centers. Engine lathes are the type most frequently used in manufacturing. They are heavy-duty machine tools with all the components described previously and have power drive for all tool movements except on the compound rest. They commonly range in size from 305 to 610 mm(12 to 24 inches)swing and from 610 to 1219 mm(24 to 48 inches) center distances, but swings up to 1270 mm(50 inches) and center distances up

英语专业毕业论文范文两篇

英语专业毕业论文范文两篇 英语专业毕业论文范文两篇 篇一 摘要：提高中专学生的听力水平，是教师关注的重点。本文提出影响中专学生英语听力水平的两大因素：知识性障碍与非知识性障碍。笔者在分析这两大因素是如何影响学生听力的基础上，得出提高学生英语听力水平的途径，主要从课堂教学及课外活动进行说明。 关键词： 中专英语教育越来越侧重培养英语综合应用的能力，而英语听力是英语学习的基础，也是英语教学过程中比较薄弱的环节。那么影响听力的因素有哪些呢? 一、影响中专学生听力水平的因素 一般而言，影响中专学生听力的因素很多，对这些因素归类整理，主要分为两类：知识性障碍和非知识性障碍。 (一)知识性障碍包括语言知识性障碍和文化背景障碍。 1.语言障碍包括语音、语速、词汇、语法、语言思维等环节存在问题。 (1)发音不标准导致语音的辨别能力低。学生掌握不好英语标准发音，在听的过程中即使是自己认识的单词，会由于发音不同也难以听辨出来。此外英语中发音相似仅有微小差别的单词很多，于是由于发音不标准很容易使单词混淆。 (2)语速连贯能力弱，导致辨音能力差。英语单词有弱读、重读、连读、爆破、语气、语调的升降等，在连贯的语流中该词的发音会发生变化。学生缺乏辨识这些单词的能力，同时英文正常速度比中文正常速度快10倍，因此学生平时能正确发音的单词也不能正确分辨出来。 (3)词汇量的大小，对词汇的熟练掌握程度会影响听力的效果。大多数单词在字典上有多种意思，单词在不同的环境中词义会不同。学生对单词的掌握不够全面，只是知晓某单词的部分意思，他们听的过程中只能根据自己熟悉的词义去理解，往往与听力内容不相符，会误解了听到的句子意思。 (4)语法的掌握程度影响听力理解。学生对句子的结构，英语中的进行时、完成时等没

Manufacturing Engineering and Technology(机械类英文文献+翻译)

Manufacturing Engineering and Technology—Machining Serope kalpakjian；Steven R.Schmid 机械工业出版社2004年3月第1版 20.9 MACHINABILITY The machinability of a material usually defined in terms of four factors: 1、Surface finish and integrity of the machined part; 2、Tool life obtained; 3、Force and power requirements; 4、Chip control. Thus, good machinability good surface finish and integrity, long tool life, and low force And power requirements. As for chip control, long and thin (stringy) cured chips, if not broken up, can severely interfere with the cutting operation by becoming entangled in the cutting zone. Because of the complex nature of cutting operations, it is difficult to establish relationships that quantitatively define the machinability of a material. In manufacturing plants, tool life and surface roughness are generally considered to be the most important factors in machinability. Although not used much any more, approximate machinability ratings are available in the example below. 20.9.1 Machinability Of Steels Because steels are among the most important engineering materials (as noted in Chapter 5), their machinability has been studied extensively. The machinability of steels has been mainly improved by adding lead and sulfur to obtain so-called free-machining steels. Resulfurized and Rephosphorized steels. Sulfur in steels forms manganese sulfide inclusions (second-phase particles), which act as stress raisers in the primary shear zone. As a result, the chips produced break up easily and are small; this improves machinability. The size, shape, distribution, and concentration of these inclusions significantly influence machinability. Elements such as tellurium and selenium, which are both chemically similar to sulfur, act as inclusion modifiers in

中英文论文对照格式

英文论文APA格式 英文论文一些格式要求与国内期刊有所不同。从学术的角度讲，它更加严谨和科学，并且方便电子系统检索和存档。 版面格式

表格 表格的题目格式与正文相同，靠左边，位于表格的上部。题目前加Table后跟数字，表示此文的第几个表格。 表格主体居中，边框粗细采用0.5磅；表格内文字采用Times New Roman，10磅。 举例： Table 1. The capitals, assets and revenue in listed banks

图表和图片 图表和图片的题目格式与正文相同，位于图表和图片的下部。题目前加Figure 后跟数字，表示此文的第几个图表。图表及题目都居中。只允许使用黑白图片和表格。 举例： Figure 1. The Trend of Economic Development 注：Figure与Table都不要缩写。 引用格式与参考文献 1. 在论文中的引用采取插入作者、年份和页数方式，如"Doe (2001, p.10) reported that …" or "This在论文中的引用采取作者和年份插入方式，如"Doe (2001, p.10) reported that …" or "This problem has been studied previously (Smith, 1958, pp.20-25)。文中插入的引用应该与文末参考文献相对应。 举例：Frankly speaking, it is just a simulating one made by the government, or a fake competition, directly speaking. (Gao, 2003, p.220). 2. 在文末参考文献中，姓前名后，姓与名之间以逗号分隔；如有两个作者，以and连接；如有三个或三个以上作者，前面的作者以逗号分隔，最后一个作者以and连接。 3. 参考文献中各项目以“点”分隔，最后以“点”结束。 4. 文末参考文献请按照以下格式：

汽车制动系统(机械、车辆工程毕业论文英文文献及翻译)

Automobile Brake System汽车制动系统 The braking system is the most important system in cars. If the brakes fail, the result can be disastrous. Brakes are actually energy conversion devices, which convert the kinetic energy (momentum) of the vehicle into thermal energy (heat).When stepping on the brakes, the driver commands a stopping force ten times as powerful as the force that puts the car in motion. The braking system can exert thousands of pounds of pressure on each of the four brakes. Two complete independent braking systems are used on the car. They are the service brake and the parking brake. The service brake acts to slow, stop, or hold the vehicle during normal driving. They are foot-operated by the driver depressing and releasing the brake pedal. The primary purpose of the brake is to hold the vehicle stationary while it is unattended. The parking brake is mechanically operated by when a separate parking brake foot pedal or hand lever is set. The brake system is composed of the following basic components: the “master cylinder” which is located under the hood, and is directly connected to the brake pedal, converts driver foot’s mechanical pressure into hydraulic pressure. Steel “brake lines” and flexible “brake hoses” connect the master cylinder to the “slave cylinders” located at each wheel. Brake fluid, specially designed to work in extreme conditions, fills the system. “Shoes” and “pads” are pushed by the slave cylinders to contact the “drums” and “rotors” thus causing drag, which (hopefully) slows the c ar. The typical brake system consists of disk brakes in front and either disk or drum brakes in the rear connected by a system of tubes and hoses that link the brake at each wheel to the master cylinder (Figure). Basically, all car brakes are friction brakes. When the driver applies the brake, the control device forces brake shoes, or pads, against the rotating brake drum or disks at wheel. Friction between the shoes or pads and the drums or disks then slows or stops the wheel so that the car is braked.