当前位置：文档库 › RI-TRP-RR2B_08中文资料

RI-TRP-RR2B_08中文资料

FEATURES

APPLICATIONS DESCRIPTION

ABSOLUTE MAXIMUM RATINGS

(1)

RI-TRP-RR2B,RI-TRP-WR2B,RI-TRP-DR2B,RI-TRP-IR2B

32mm Glass Transponder

SCBS842A–SEPTEMBER2001–REVISED FEBRUARY2008

https://www.wendangku.net/doc/9514804628.html,

?Access Control

?Best in Class Performance Through Patented

HDX Technology?Vehicle Identification

?Container Tracking

?Patented Transponder Tuning Provides Stable

and High Read/Write Performance?Asset Management

?Waste Management

?64Bit Read Only,80Bit Read/write and MPT

1360Bit Types are Available

?ISO11784/11785Compliant

?Insensitive to Almost All Non-Metallic

Materials

Texas Instruments’32mm glass transponders are providing superior performance and operate at a resonance frequency of134.2kHz.Specific products are compliant to ISO/IEC11784/11785global open standards.Texas Instruments LF transponders are manufactured with TI’s patented tuning process to provide consistent read and write performance.Prior to delivery,the transponders undergo complete functional and parametric testing,in order to provide the high quality customers have come to expect from TI.The transponder is well suited for usage in a broad range of applications including,but not limited to,access control,vehicle identification, container tracking,asset management and waste management applications.

over operating free-air temperature range(unless otherwise noted)

RI-TRP-RR2B RI-TRP-WR2B RI-TRP-DR2B RI-TRP-IR2B UNIT Operating Temperature(Read)–25to+85–25to+85–25to+85–25to+85°C Operating Temperature(Program)—–25to+70–25to+85–25to+85°C Storage Temperature–40to+100(+125°C for total1000hours)°C (1)Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device.These are stress ratings

only,and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied.Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

Please be aware that an important notice concerning availability,standard warranty,and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

TI-RFID is a trademark of Texas Instruments.

PRODUCTION DATA information is current as of publication date.Copyright?2001–2008,Texas Instruments Incorporated Products conform to specifications per the terms of the Texas

Instruments standard warranty.Production processing does not

necessarily include testing of all parameters.

https://www.wendangku.net/doc/9514804628.html,

OPERATING CHARACTERISTICS

RI-TRP-RR2B,RI-TRP-WR2B,RI-TRP-DR2B,RI-TRP-IR2B 32mm Glass Transponder

SCBS842A–SEPTEMBER 2001–REVISED FEBRUARY 2008

over operating free-air temperature range (unless otherwise noted)

PART NUMBER

PARAMETER

UNIT

RI-TRP-RR2B RI-TRP-WR2B RI-TRP-DR2B

RI-TRP-IR2B Functionality Read Only Read/Write MPT SAMPT Memory (Bits)6480(1)1360(1)1360(1)Memory (Pages)11

17(1)R/W

17(1)R/W (2)

Operating Frequency 134.2

kHz Modulation

FSK (Frequency Shift Keying)134.2kHz /123.2kHz Transmission Principle HDX (Half Duplex)

Power Source Powered from the reader signal (batteryless)Typical Read Range ≤100(3)

Typical Programming Range —

30%of specified reading range Typical Read Time 70708686ms Typical Programming Time —309293341ms

Typical Programming Cycles —

100,000

Case Material Glass

Protection Class Hermetically sealed

EMC

Programmed code is not affected by normal electromagnetic interference or x-rays Signal Penetration Transponder can be read through virtually all non-metallic material Mechanical Shock IEC 68-2-27,Test Ea;300g,half sine,3ms,2axes

IEC 68-2-6,Test Fc;3g,5–50Hz,2axes,24hours per axis Vibration 20g,10–2000Hz,2axes,2.5hours per axis Dimensions Φ3.85±0.05(1)31.2±0.6Φ3.85±0.05(1)32.2±0.6mm Weight 0.8

0.85

g (1)We recommend that you split each 80bit page into 64user programmable bits plus a 16bit wide CRC CCITT Block Check Character as is done by TI-RFID?LF readers.(2)24bits Selective Address width

(3)

Depending on RF regulation in country of use,the Reader Antenna configuration used,and the environmental conditions.

2Submit Documentation Feedback Copyright ?2001–2008,Texas Instruments Incorporated

Product Folder Link(s):RI-TRP-RR2B RI-TRP-WR2B RI-TRP-DR2B RI-TRP-IR2B

PACKAGING INFORMATION

Orderable Device Status (1)Package Type Package Drawing Pins Package Qty Eco Plan (2)

Lead/Ball Finish

MSL Peak Temp (3)RI-TRP-DR2B ACTIVE RFIDT TGB 12000TBD Call TI N /A for Pkg Type RI-TRP-IR2B-30ACTIVE RFIDT TGB 12000Pb-Free (RoHS)Call TI N /A for Pkg Type RI-TRP-RR2B-30ACTIVE RFIDT TGB 12000

Pb-Free (RoHS)Call TI N /A for Pkg Type RI-TRP-WR2B-20OBSOLETE RFIDT TGB 1TBD Call TI Call TI

RI-TRP-WR2B-30

ACTIVE

RFIDT

TGB

2000Pb-Free (RoHS)

Call TI

N /A for Pkg Type

(1)

The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.

LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.

NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.

PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.

(2)

Eco Plan -The planned eco-friendly classification:Pb-Free (RoHS),Pb-Free (RoHS Exempt),or Green (RoHS &no Sb/Br)-please check https://www.wendangku.net/doc/9514804628.html,/productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.

Pb-Free (RoHS):TI's terms "Lead-Free"or "Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all 6substances,including the requirement that lead not exceed 0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.

Pb-Free (RoHS Exempt):This component has a RoHS exemption for either 1)lead-based flip-chip solder bumps used between the die and package,or 2)lead-based die adhesive used between the die and leadframe.The component is otherwise considered Pb-Free (RoHS compatible)as defined above.

Green (RoHS &no Sb/Br):TI defines "Green"to mean Pb-Free (RoHS compatible),and free of Bromine (Br)and Antimony (Sb)based flame retardants (Br or Sb do not exceed 0.1%by weight in homogeneous material)

(3)

MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.

Important Information and Disclaimer:The information provided

on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.

In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.

PACKAGE OPTION ADDENDUM

https://www.wendangku.net/doc/9514804628.html,

27-Feb-2008

Addendum-Page 1

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,modifications,enhancements,improvements, and other changes to its products and services at any time and to discontinue any product or service without notice.Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.

TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty.Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty.Except where mandated by government requirements,testing of all parameters of each product is not necessarily performed.

TI assumes no liability for applications assistance or customer product design.Customers are responsible for their products and applications using TI components.To minimize the risks associated with customer products and applications,customers should provide adequate design and operating safeguards.

TI does not warrant or represent that any license,either express or implied,is granted under any TI patent right,copyright,mask work right, or other TI intellectual property right relating to any combination,machine,or process in which TI products or services are https://www.wendangku.net/doc/9514804628.html,rmation published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement https://www.wendangku.net/doc/9514804628.html,e of such information may require a license from a third party under the patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI.

Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties,conditions,limitations,and notices.Reproduction of this information with alteration is an unfair and deceptive business practice.TI is not responsible or liable for such altered https://www.wendangku.net/doc/9514804628.html,rmation of third parties may be subject to additional restrictions.

Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.

TI products are not authorized for use in safety-critical applications(such as life support)where a failure of the TI product would reasonably be expected to cause severe personal injury or death,unless officers of the parties have executed an agreement specifically governing such use.Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications,and acknowledge and agree that they are solely responsible for all legal,regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications,notwithstanding any applications-related information or support that may be provided by TI.Further,Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications.

TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or"enhanced plastic."Only products designated by TI as military-grade meet military specifications.Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk,and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS16949requirements.Buyers acknowledge and agree that,if they use any non-designated products in automotive applications,TI will not be responsible for any failure to meet such requirements.

Following are URLs where you can obtain information on other Texas Instruments products and application solutions:

Products Applications

Amplifiers Audio

Data Converters Automotive

DSP Broadband

Clocks and Timers Digital Control

Interface Medical

Logic Military

Power Mgmt Optical Networking

Microcontrollers Security

RFID Telephony

RF/IF and ZigBee?Solutions Video&Imaging

Wireless

Mailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265