10
?
NIC COMPONENTS CORP. www https://www.wendangku.net/doc/aa15091520.html, www https://www.wendangku.net/doc/aa15091520.html, www https://www.wendangku.net/doc/aa15091520.html, www .SMTmagnetics.
com
Surface Mount Aluminum Electrolytic Capacitors
NACEW Series
FEATURES
?CYLINDRICAL V-CHIP CONSTRUCTION ?WIDE TEMPERA TURE -55 ~ +105O C ?ANTI-SOLVENT (2 MINUTES)
?DESIGNED FOR REFLOW tt SOLDERING * Optional ± 10% (K) Tolerance - see case size chart.**
For higher voltages, 200V and 400V , see NACV series.
CHARACTERISTICS
MAXIMUM ESR
(? AT 120Hz AND 20O C)
MAXIMUM PERMISSIBLE RIPPLE CURRENT
(mA rms AT 120Hz AND 105O C)
Rated Voltage Range
6.3 ~ 100Vdc**Rate Capacitance Range
0.1 ~ 6,800μF Operating Temp. Range -55°C ~ +105°C (100V -40°C ~ +105 °C)
Capacitance Tolerance
±20% (M), ±10% (K)*Max. Leakage Current
After 2 Minutes @ 20°C
0.01CV or 3μA whichever is greater Max. Tan δ @120Hz/20°C W.V . (Vdc) 6.3101625355063100S.V . (Vdc)81320
324463791254 ~ 6.3mm Dia.0.240.200.16
0.140.120.100.120.108 & larger 0.280.240.200.160.140.120.120.10Low Temperature Stability
Impedance Ratio @ 120Hz
W.V . (Vdc) 6.31016
25355063100Z-40°C/Z+20°C 332
22222Z-55°C/Z+20°C 864
4333-
Load Life Test 4 ~ 6.3mm Dia. & 10x8mm
+105°C 1,000 hours
+95°C 2,000 hours +85°C 4,000 hours
Capacitance Change Within ± 25% of initial measured value Tan δ
Less than 200% of specifi ed max. value
8 ~ 16mm Dia.+105°C 2,000 hours +95°C 4,000 hours +85°C 8,000 hours Leakage Current Less than specifi ed max. value
RoHS Compliant
includes all homogeneous materials *See Part Number System for Details
RIPPLE CURRENT FREQUENCY CORRECTION FACTOR
Frequency (Hz) f < 100100 > f < 1K 1K > f < 10K f > 100K
Correction Factor
0.8
1.0 1.3 1.5
PRECAUTIONS
Please review the notes on correct use, safety and precautions found on pages T10 & T11
of NIC’s Electrolytic Capacitor catalog . Also found at https://www.wendangku.net/doc/aa15091520.html,/precautions
If in doubt or uncertainty, please review your specifi c application - process details with
NIC’s technical support personnel: tpmg@https://www.wendangku.net/doc/aa15091520.html,
Cap. (μF)Working Voltage (Vdc)6.3101625355063
1000.1-----0.7
0.7-0.22----- 1.6
1.6-0.33-----
2.5
2.5-0.47-----
3.5
3.5-1.0-----7.0
7.07.02.2-----11
11143.3-----13
14204.7---131416
162510--182021242435222225273638324984332730404442601121334733414848496311924010050-609184140196-150556295140155--50022067105105175190220287-330105195195220300---470210210230300410-630-1000280310-460-655--1500310-500-740---2200-510-805----3300520-840-----4700-880------6800
930
-------
Cap. (μF)Working Voltage (Vdc)6.3101625355063
1000.1-----1660
1990-0.22-----754
905-0.33-----503
604-0.47-----353
424-1.0-----166
1991662.2-----75.4
90.575.43.3-----50.3
60.350.34.7---49.442.335.3
42.335.310--26.523.219.916.619.916.62218.115.112.110.69.057.649.047.643312.110.18.047.04 6.04 5.03 6.03 5.03478.477.06 5.65 4.95 4.24 3.53 4.24 3.53100 3.98- 2.66 2.32 2.32 1.99 1.99-150 2.66 2.21 1.77 1.77 1.55-- 1.10220 1.81 1.51 1.21 1.21 1.060.910.91-330 1.21 1.21 1.000.800.70---4700.990.850.710.570.49-0.42-10000.460.40-0.27-0.20--15000.31-0.23-0.15---2200-0.18-0.14----33000.14-0.12-----4700-0.11------6800
0.093
-------
11
NACEW Series
Surface Mount Aluminum Electrolytic Capacitors
NACEW 101 M 16V 6.3x5.5 TR 13 F
RoHS Compliant
97% Sn (min.), 3% Bi (max.) 330mm (13”) Reel Tape & Reel Size in mm Working Voltage
Tolerance Code M=20%, K=10%
Capacitance Code in mF , first 2 digits are significant Third digit is no. of zeros, “R” indicates decimal for values under 10μF Series
PART NUMBER SYSTEM
+ -