syslog

##########################################################################
# TL-WR842N System Log
# Time = 2015-11-29 14:47:06 1155s
# H-Ver = 7.0 : S-Ver = 3.1.26 Build 150701 Rel.37700n
# L = 192.168.1.1 : M = 255.255.255.0
# WAN = PPPoE : W = 123.233.105.211 : M = 255.255.255.255 : G = 123.233.104.1
# Cnt = 5504, Free = 5368, Busy = 136
##########################################################################
0days, 00:00:05, LAN: Attach mirror0 to stack.
0days, 00:00:05, WAN: Attach interface eth1.
0days, 00:00:05, WAN: Wan ethernet port plug on.
0days, 00:00:05, LAN: Set interface mirror0 ip=192.168.1.1 netmask 255.255.255.0.
0days, 00:00:05, HTTPD: Http server start!
0days, 00:00:07, WAN: Wan ethernet port plug off.
0days, 00:00:07, PPPOE: Standard authentication.
0days, 00:00:07, PPPOE: TX PADT[session=227d].
0days, 00:00:07, PPPOE: try special dial type 0.
0days, 00:00:07, PPPOE: TX PADI.
0days, 00:00:07, WAN: Wan ethernet port plug on.
0days, 00:00:12, PPPOE: TX PADI.
0days, 00:00:12, PPPOE: RX PADO, AC-NAME=SDJN-JFQ-ME60-B2, AC-MAC=20-0b-c7-1f-f7-db.
0days, 00:00:12, PPPOE: TX PADR.
0days, 00:00:12, PPPOE: RX PADS[session=81eb].
0days, 00:00:12, PPP: [LCP]RX CONFIGURE_REQUEST.
0days, 00:00:12, PPP: [LCP]TX CONFIGURE_REQUEST.
0days, 00:00:12, PPP: [LCP]TX CONFIGURE_ACK[mru=1492, auth=C023/5, magic=C469E7C6].
0days, 00:00:12, PPP: [LCP]RX CONFIGURE_ACK[mru=1480, magic=000042C3].
0days, 00:00:12, PPP: [PAP]TX AUTHENTICATION_REQUEST.
0days, 00:00:13, PPP: [PAP]RX AUTHENTICATION_ACK.
0days, 00:00:13, PPP: [IPCP]RX CONFIGURE_REQUEST.
0days, 00:00:13, PPP: [IPCP]TX CONFIGURE_REQUEST.
0days, 00:00:13, PPP: [IPCP]TX CONFIGURE_ACK[ip=123.233.104.1].
0days, 00:00:13, PPP: [IPCP]RX CONFIGURE_NAK.
0days, 00:00:13, PPP: [IPCP]TX CONFIGURE_REQUEST.
0days, 00:00:13, PPP: [IPCP]RX CONFIGURE_ACK[ip=123.233.105.211, dns=202.102.128.68/202.102.134.68].
0days, 00:00:14, PPPOE: ppp0 set localIp 123.233.105.211 remoteIp 123.233.104.1 mtu 1480.