Data Sheet
300V Input Mini Family
DC-DC Converter Module
Features
?DC input range: 180- 375 V ?Isolated ouput
?Input surge withstand: 400 V for 100 ms ?DC output: 2 – 48 V
?Programmable output: 10to 110%?Regulation: ±0.4% no load to full load ?Efficiency: Up to 89%
?Maximum operating temp: 100°C, full load ?Power density: up to 90 W per cubic inch ?Height above board: 0.43 in. (10,9 mm)?Parallelable, with N+M fault tolerance ?Low noise ZCS/ZVS architecture
?
RoHS Compliant (with F or G pin option)
Product Overview
These DC-DC converter modules use advanced power processing, control and packaging technologies to provide the performance, flexibility, reliability and cost effectiveness of a mature power component. High frequency ZCS/ZVS switching provides high power density with low noise and high efficiency.
Applications
Off-line systems with auto-ranging or PFC front ends, industrial and process control,distributed power, medical, ATE, communications, defense, aerospace For details on proper operation please refer to the Design Guide & Applications Manual for Maxi, Mini, Micro Family.
Parameter Rating Unit Notes
+In to –In voltage -0.5 to +410Vdc PC to –In voltage -0.5 to +7.0Vdc PR to –In voltage -0.5 to +7.0Vdc SC to -Out voltage -0.5 to +1.5
Vdc -Sense to -Out voltage 1.0Vdc Isolation voltage in to out 3000Vrms Test voltage in to base 1500Vrms Test voltage out to base 500Vrms Test voltage Operating Temperature -55 to +100°C M-Grade Storage Temperature -65 to +125°C M-Grade
Pin soldering temperature 500 (260)°F (°C)<5 sec; wave solder Pin soldering temperature 750 (390)°F (°C)<7 sec; hand solder
Mounting torque
5 (0.57)
in-lbs (N-m)
6 each
Part Numbering
Shown actual size:2.28 x 2.2 x 0.5 in 57,9 x 55,9 x 12,7 mm
Absolute Maximum Ratings
MODULE FAMILY ELECTRICAL CHARACTERISTICS
Electrical characteristics apply over the full operating range of input voltage, output load (resistive) and baseplate temperature, unless otherwise specified. All temperatures refer to the operating temperature at the center of the baseplate.
MODULE INPUT SPECIFICATIONS
MODULE OUTPUT SPECIFICATIONS
Note:For important information relative to applications where the converter modules are subject to continuous dynamic loading, contact Vicor applications engineering at 800-927-9474.
THERMAL RESISTANCE AND CAPACITY
MODULE FAMILY ELECTRICAL CHARACTERISTICS (CONT.) MODULE CONTROL SPECIFICATIONS
MODULE GENERAL SPECIFICATIONS
* Isolation test voltage, 1 minute or less.
Note:
Specifications are subject to change without notice.
MODULE SPECIFIC OPERATING SPECIFICATIONS
2 Vout, 100 W (e.g. V300B2C100BL)
Parameter Min Typ Max Unit Notes
Efficiency7374%Nominal input; full load; 25 °C
Ripple and noise120150mV p-p; Nominal input; full load; 20 MHz bandwidth Output OVP setpoint 2.7 2.8 2.9Volts25 °C; recycle input voltage or PC to restart (>100 ms off) Dissipation, standby 3.84Watts No load
Load regulation±0.02±0.2%No load to full load; nominal input
Load current050Amps
Current limit5157.570Amps Output voltage 95% of nominal
Short circuit current3557.570Amps Output voltage <250 mV
3.3 Vout, 150 W (e.g. V300B3V3C150BL)
Parameter Min Typ Max Unit Notes
Efficiency7880%Nominal input; full load; 25 °C
Ripple and noise160200mV p-p; Nominal input; full load; 20 MHz bandwidth Output OVP setpoint 4.14 4.3 4.46Volts25 °C; recycle input voltage or PC to restart (>100 ms off) Dissipation, standby 4.6 6.9Watts No load
Load regulation±0.02±0.2%No load to full load; nominal input
Load current045.45Amps
Current limit46.452.363.7Amps Output voltage 95% of nominal
Short circuit current31.852.363.7Amps Output voltage <250 mV
3.3 Vout, 100 W (e.g. V300B3V3C100BL)
Parameter Min Typ Max Unit Notes
Efficiency79.080.8%Nominal input; full load; 25 °C
Ripple and noise84105mV p-p; Nominal input; full load; 20 MHz bandwidth Output OVP setpoint 4.14 4.3 4.46Volts25 °C; recycle input voltage or PC to restart (>100 ms off) Dissipation, standby 4.5 4.9Watts No load
Load regulation±0.02±0.2%No load to full load; nominal input
Load current030.30Amps
Current limit30.934.841Amps Output voltage 95% of nominal
Short circuit current21.234.841Amps Output voltage <250 mV
5 Vout, 200 W (e.g. V300B5C200BL)
Parameter Min Typ Max Unit Notes
Efficiency8283%Nominal input; full load; 25 °C
Ripple and noise80100mV p-p; Nominal input; full load; 20 MHz bandwidth Output OVP setpoint 6.03 6.25 6.47Volts25 °C; recycle input voltage or PC to restart (>100 ms off) Dissipation, standby 4.2 6.3Watts No load
Load regulation±0.02±0.2%No load to full load; nominal input
Load current040Amps
Current limit40.84652Amps Output voltage 95% of nominal
Short circuit current284652Amps Output voltage <250 mV
5 Vout, 150 W (e.g. V300B5C150BL)
Parameter Min Typ Max Unit Notes
Efficiency80.983%Nominal input; full load; 25 °C
Ripple and noise198248mV p-p; Nominal input; full load; 20 MHz bandwidth Output OVP setpoint 6.03 6.25 6.47Volts25 °C; recycle input voltage or PC to restart (>100 ms off) Dissipation, standby69.4Watts No load
Load regulation±0.02±0.2%No load to full load; nominal input
Load current030Amps
Current limit30.634.540.5Amps Output voltage 95% of nominal
Short circuit current2134.540.5Amps Output voltage <250 mV
Parameter Min Typ Max Unit Notes
Efficiency83.284.4%Nominal input; full load; 25 °C
Ripple and noise280350mV p-p; Nominal input; full load; 20 MHz bandwidth Output OVP setpoint9.369.710.1Volts25 °C; recycle input voltage or PC to restart (>100 ms off) Dissipation, standby 5.5 6.5Watts No load
Load regulation±0.02±0.2%No load to full load; nominal input
Load current025Amps
Current limit25.528.833.8Amps Output voltage 95% of nominal
Short circuit current17.528.833.8Amps Output voltage <250 mV
12 Vout, 250 W (e.g. V300B12C250BL)
Parameter Min Typ Max Unit Notes
Efficiency85.386.3%Nominal input; full load; 25 °C
Ripple and noise150188mV p-p; Nominal input; full load; 20 MHz bandwidth Output OVP setpoint13.714.314.9Volts25 °C; recycle input voltage or PC to restart (>100 ms off) Dissipation, standby46Watts No load
Load regulation±0.06±0.3%No load to full load; nominal input
Load current020.83Amps
Current limit21.32428.1Amps Output voltage 95% of nominal
Short circuit current14.62428.1Amps Output voltage <250 mV
12 Vout, 150 W (e.g. V300B12C150BL)
Parameter Min Typ Max Unit Notes
Efficiency8586.6%Nominal input; full load; 25 °C
Ripple and noise240300mV p-p; Nominal input; full load; 20 MHz bandwidth Output OVP setpoint13.714.314.9Volts25 °C; recycle input voltage or PC to restart (>100 ms off) Dissipation, standby 5.77Watts No load
Load regulation±0.02±0.2%No load to full load; nominal input
Load current012.5Amps
Current limit12.714.416.9Amps Output voltage 95% of nominal
Short circuit current8.7514.416.9Amps Output voltage <250 mV
15 Vout, 250 W (e.g. V300B15C250BL)
Parameter Min Typ Max Unit Notes
Efficiency86.587.5%Nominal input; full load; 25 °C
Ripple and noise220275mV p-p; Nominal input; full load; 20MHz bandwidth Output OVP setpoint17.117.818.5Volts25 °C; recycle input voltage or PC to restart (>100 ms off) Dissipation, standby 5.58.3Watts No load
Load regulation±0.06±0.2%No load to full load; nominal input
Load current016.67Amps
Current limit1719.221.8Amps Output voltage 95% of nominal
Short circuit current11.619.221.8Amps Output voltage <250 mV
15 Vout, 150 W (e.g. V300B15C150BL)
Parameter Min Typ Max Unit Notes
Efficiency8384.9%Nominal input; full load; 25 °C
Ripple and noise260325mV p-p; Nominal input; full load; 20 MHz bandwidth Output OVP setpoint17.117.818.5Volts25 °C; recycle input voltage or PC to restart (>100 ms off) Dissipation, standby 4.87.7Watts No load
Load regulation±0.02±0.2%No load to full load; nominal input
Load current010Amps
Current limit10.211.513.5Amps Output voltage 95% of nominal
Short circuit current711.513.5Amps Output voltage <250 mV
Parameter Min Typ Max Unit Notes
Efficiency86.587.5%Nominal input; full load; 25 °C
Ripple and noise160200mV p-p; Nominal input; full load; 20MHz bandwidth Output OVP setpoint27.128.129.1Volts25 °C; recycle input voltage or PC to restart (>100 ms off) Dissipation, standby 6.47.4Watts No load
Load regulation±0.06±0.3%No load to full load; nominal input
Load current010.42Amps
Current limit10.712.113.7Amps Output voltage 95% of nominal
Short circuit current7.3512.113.7Amps Output voltage <250 mV
24 Vout, 150 W (e.g. V300B24C150BL)
Parameter Min Typ Max Unit Notes
Efficiency85.786.9%Nominal input; full load; 25 °C
Ripple and noise160200mV p-p; Nominal input; full load; 20 MHz bandwidth Output OVP setpoint27.128.129.1Volts25 °C; recycle input voltage or PC to restart (>100 ms off) Dissipation, standby 6.37.1Watts No load
Load regulation±0.02±0.2%No load to full load; nominal input
Load current0 6.25Amps
Current limit 6.377.198.44Amps Output voltage 95% of nominal
Short circuit current 4.377.198.44Amps Output voltage <250 mV
28 Vout, 250 W (e.g. V300B28C250BL)
Parameter Min Typ Max Unit Notes
Efficiency8788.5%Nominal input; full load; 25 °C
Ripple and noise200250mV p-p; Nominal input; full load; 20 MHz bandwidth Output OVP setpoint31.532.733.9Volts25 °C; recycle input voltage or PC to restart (>100 ms off) Dissipation, standby 5.9 6.9Watts No load
Load regulation±0.06±0.3%No load to full load; nominal input
Load current08.93Amps
Current limit9.110.311.7Amps Output voltage 95% of nominal
Short circuit current 6.2510.311.7Amps Output voltage <250 mV
28 Vout, 150 W (e.g. V300B28C150BL)
Parameter Min Typ Max Unit Notes
Efficiency86.487.4%Nominal input; full load; 25 °C
Ripple and noise152190mV p-p; Nominal input; full load; 20 MHz bandwidth Output OVP setpoint31.732.934.1Volts25 °C; recycle input voltage or PC to restart (>100 ms off) Dissipation, standby 5.58.8Watts No load
Load regulation±0.02±0.2%No load to full load; nominal input
Load current0 5.36Amps
Current limit 5.46 6.167.24Amps Output voltage 95% of nominal
Short circuit current 3.75 6.167.24Amps Output voltage <250 mV
36 Vout, 250 W (e.g. V300B36C250BL)
Parameter Min Typ Max Unit Notes
Efficiency8687.1%Nominal input; full load; 25 °C
Ripple and noise100125mV p-p; Nominal input; full load; 20MHz bandwidth Output OVP setpoint40.441.943.4Volts25 °C; recycle input voltage or PC to restart (>100 ms off) Dissipation, standby9.811.1Watts No load
Load regulation±0.02±0.2%No load to full load; nominal input
Load current0 6.94Amps
Current limit7.077.989.37Amps Output voltage 95% of nominal
Short circuit current 4.857.989.37Amps Output voltage <250 mV
Parameter Min Typ Max Unit Notes
Efficiency86.287.2%Nominal input; full load; 25 °C
Ripple and noise7290mV p-p; Nominal input; full load; 20 MHz bandwidth Output OVP setpoint40.441.943.4Volts25 °C; recycle input voltage or PC to restart (>100 ms off) Dissipation, standby 5.6 6.6Watts No load
Load regulation±0.02±0.2%No load to full load; nominal input
Load current0 4.17Amps
Current limit 4.25 4.8 5.63Amps Output voltage 95% of nominal
Short circuit current 2.91 4.8 5.63Amps Output voltage <250 mV
48 Vout, 250 W (e.g. V300B48C250BL)
Parameter Min Typ Max Unit Notes
Efficiency87.389%Nominal input; full load; 25 °C
Ripple and noise100125mV p-p; Nominal input; full load; 20 MHz bandwidth Output OVP setpoint53.755.757.7Volts25 °C; recycle input voltage or PC to restart (>100 ms off) Dissipation, standby 4.211.7Watts No load
Load regulation±0.06±0.4%No load to full load; nominal input
Load current0 5.21Amps
Current limit 5.31 5.99 6.78Amps Output voltage 95% of nominal
Short circuit current 3.65 5.997Amps Output voltage <250 mV
48 Vout, 150 W (e.g. V300B48C150BL)
Parameter Min Typ Max Unit Notes
Efficiency85.587.3%Nominal input; full load; 25 °C
Ripple and noise180225mV p-p; Nominal input; full load; 20 MHz bandwidth Output OVP setpoint53.755.757.7Volts25 °C; recycle input voltage or PC to restart (>100 ms off) Dissipation, standby 5.4 6.9Watts No load
Load regulation±0.02±0.2%No load to full load; nominal input
Load current0 3.13Amps
Current limit 3.19 3.6 4.23Amps Output voltage 95% of nominal
Short circuit current 2.19 3.6 4.23Amps Output voltage <250 mV
BASIC MODULE OPERATION
Figure 1 —Basic module operation requires fusing, grounding, bypassing capacitors.
* See Maxi, Mini, Micro Design Guide.
CLICK?HERE TO?VIEW
DESIGN GUIDE
Also at https://www.wendangku.net/doc/bc11985213.html,
PowerBench online configurators
Figure 2 —Module enable/disable.Figure 4 —LED on-state indicator.
Figure 3 —PC/SC module alarm logic.
Figure 6 —Isolated on-state indicator.
Figure 5 —PC/SC module alarm timing.
Figure 7 —Secondary side on-state indicator.
Module Enable/Disable
The module may be disabled by pulling PC to 0 V (2.3 V max) with respect to the –Input. This may be done with an open collector transistor, relay, or optocoupler. Converters may be disabled with a single transistor or relay either directly or via “OR’ing” diodes for 2 or more converters. See Figure 2.Primary Auxiliary Supply
During normal operation only, the PC Pin can source 5.7 V @1.5 mA. In the example shown in Figure 4, PC powers a mod-ule enabled LED.
Module Alarm
The module contains “watchdog” circuitry which monitors input voltage, operating temperature and internal operating parameters. In the event that any of these parameters are outside of their allowable operating range, the module will shut down and PC will go low. PC will periodically go high and the module will check to see if the fault (as an example,Input Undervoltage) has cleared. If the fault has not been cleared, PC will go low again and the cycle will restart. The SC pin will go low in the event of a fault and return to its nor-mal state after the fault has been cleared. See Figures 3 and 5.
PRIMARY CONTROL - PC PIN
Parallel Operation
The PR pin supports paralleling for increased power with N+1(N+M) redundancy. Modules of the same input voltage, output voltage, and power level will current share if all PR pins are suitably interfaced.
Compatible interface architectures include the following:AC coupled single-wire interface.All PR pins are connected to a single communication bus through 0.001 μF (500 V)capacitors. This interface supports current sharing and is fault tolerant except for the communication bus.Up to three converters may be paralleled by this method. See Figure 9.Transformer coupled interface.For paralleling four or more converters a transformer coupled interface is required. See Figure 10.
For details on parallel operation please refer to the
Design Guide & Applications Manual for Maxi, Mini, Micro Family.
* See Maxi, Mini, Micro Design Guide.
PARALLEL BUS - PR PIN
Output Voltage Programming
The output voltage of the converter can be adjusted or programmed via fixed resistors, potentiometers or voltage DACs. See Figure 8.
Figure 8 —Output voltage trim down and trim up circuit.SECONDARY CONTROL - SC PIN
分销商库存信息:
VICOR
V300B5C200BL V300B8C200BL V300B3V3C150BL V300B24C250BL V300B28C250BL V300B36C250BL
V300B48C250BL V300B12C250BL V300B3V3E100B
V300B3V3E100B2V300B3V3E100BL V300B3V3E100BL2 V300B3V3E100BL3V300B3V3E100BF2V300B3V3E100BF3 V300B5E150B V300B5E150B2V300B5E150B3
V300B5E150BL2V300B5E150BL3V300B5E150BF
V300B5E150BF3V300B5E150BG V300B5E150BG2
V300B5E150BG3V300B3V3E100BG2V300B3V3E100BG3 V300B12E150B2V300B12E150B3V300B12E150BL
V300B12E150BL2V300B12E150BL3V300B12E150BF
V300B12E150BF3V300B15E150B2V300B15E150B3
V300B15E150BL V300B15E150BL3V300B15E150BF
V300B15E150BF2V300B15E150BG V300B15E150BG2 V300B15E150BG3V300B12E150BG V300B12E150BG3 V300B28E150B3V300B28E150B V300B28E150B2
V300B28E150BL V300B28E150BL2V300B28E150BL3 V300B28E150BF V300B28E150BF3V300B28E150BG
V300B28E150BG2V300B24E150B V300B24E150B3
V300B24E150BL V300B24E150BL2V300B24E150BF
V300B24E150BF2V300B24E150BF3V300B24E150BG2 V300B24E150BG3V300B36E150BL V300B36E150BL2 V300B36E150BL3V300B36E150BF V300B36E150BF3 V300B36E150BG V300B36E150BG2V300B36E150B
V300B36E150B3V300B48E150B V300B48E150B2
V300B48E150B3V300B48E150BL2V300B48E150BL3 V300B48E150BF3V300B48E150BG V300B48E150BG2 V300B48E150BG3V300B48E150BF V300B48E150BF2 V300B12E150B V300B12E150BF2V300B12E150BG2 V300B15E150B V300B15E150BF3V300B15E150BL2 V300B24E150B2V300B24E150BG V300B24E150BL3 V300B28E150BF2V300B28E150BG3V300B36E150B2
V300B36E150BF2V300B36E150BG3V300B3V3E100B3 V300B3V3E100BF V300B3V3E100BG V300B48E150BL
V300B5E150BF2V300B5E150BL V300B5C150BF
V300B5C150BF2V300B5C150BF3V300B5C150BG2
V300B5C150BG3V300B5C150B2V300B5C150B3
V300B5C150BL3V300B8E200B2V300B8E200B3
V300B8E200BL V300B8E200BL2V300B8E200BL3
V300B8E200BF2V300B8E200BF3V300B8E200BG