诺瓦科技LED接收卡MRV410规格书英文版
Specifications
Receiving Card MRV410
Product images provided in this file are for reference only , and the actual products shall prevail.
Rev1.1.3
NS110100255
X
I '
A
N N
O
V
A S T
A
R T E C H C O .,L T D
.
Overview
MRV410 is the EMC version of MRV210 with its effective reduction of the electromagnetic radiation of the whole system.
Features
1) Single card outputs 16-group of RGBR 'data; 2) Single card outputs 20-group of RGB data; 3) Single card outputs 24-group of RGB data;
4) Single card outputs 64-group of serial data ； 5) Single card supports resolution of 256x226; 6) Configuration file read back; 7) Temperature monitoring; 8) Ethernet cable communication status detection;
9) Power supply voltage detection; 10) Pixel-by-pixel brightness and chromaticity calibration Brightness and
chromaticity calibration coefficients for each LED;
11) Each of the ports has VCC PIN and the module can provide power
supply to the control system;
12) Comply with EU CE-EMC CLass B standard.
X I 'A N N O V A S T A R T E
C H C O .,L T D
.
Output interface definition
Under all the four different working modes of it, four 26P interfaces can output different data; interface is defined as follows: 1)
16-group data mode （With virtual output ）
Supporting 16-group of RGBR 'parallel data, defined as follows:
It support 1/32 scan mode in 16-group data mode, and R4B ，R8B ，R12B ，R16B are decoding signal E. Pin 9 is decoding signal Ctrl below 1/16 scan mode(contain 1/16 scan). Pin 8 is decoding
X
I 'A
N
N O
V
A S T
A R T E C H
C
O .,
L T D
.
2)20-group data mode
Supporting 20 sets of parallel data, defined as follows:
X I'A N
N O
V A
S T
A R
T E
C H
Pin9 is Ctrl signal in 1/16 scan and below, and Pin 8 is decoding Ctrl signal in 1/8 scan and
3)24-group data mode
Supporting 24 sets of parallel data, Serial data decoding is required for scan mode above 1/4 scan (Serial data decoding circuit in the appendix), defined as follows:
JH1 JH2 H C O .,L T
D.
4) 64-group serial data mode
Supporting 64 sets of serial data, defined as follows:
Under serial mode, there are 64 data cables totally. Each cable can drive one LED bar independently.
In case of horizontal LED bar, the default is that Data1 drives the first row from the top, and Data64 drives the 64th row.
In case of vertical LED bar, the default is that Data1 drives the first column of from the left, and Data64 drives the 64th column.
X
I 'A
N N
O
V
A S T
A
R T E C H
C
O .,
L T D
.
Thickness of the board is about 2mm. The overall thickness (board thickness ＋thickness of the components on front and back side) is about 18mm.
Unit: mm. Appearance
Note: Product images provided in this file are for reference only, and the actual products shall prevail.
J9 definition （Indicator Light Socket ）
A S T A R T E C H
C
O .,
L T D
.
Specific Model List
To meet the needs of different customers, Nova has provided more specific models of the products, including standard products in stock. C H
C
O .,
L T D
.
Serial data decoding circuit：
X I'A N
N O
V A
S T
A R
T E
C H
C O
.,L T
D.