en_safety_caty01343350942

Descriptive Report

and Test Results

MASTER CONTRACT: 231746

REPORT: 1953207

PROJECT: 2164653 Edition 1:October 9, 2007; Project 1953207 - Montreal

Issued by Eric Fortier, Eng.

Edition 3:April 29, 2009; Project 2164653 - Toronto

Prepared by David Chen; Reviewed by Jupiter Huang

Report pages reissued

Contents: Certificate of Compliance - Page 1 to 2

Supplement to Certificate of Compliance - Page 1

Description and Tests - Pages 1 to 10

Att1 Photos - 1 to 4

SIQ CB certificate (SI-1862) dated 2007-5-4 + Test reports, 116 pages

PRODUCTS

CLASS 5311 07 - POWER SUPPLIES - Component Type (CSA 60950-1-03)

CLASS 5311 87 - POWER SUPPLIES - Component Type - Certified to US Stds. (CSA 60950-1-03/UL 60950-1, First Edition, NRTL Program)

? DC to DC Converters*, PCB Mount, Models and rating as follow:

Rating Model MIHW series: x stands for output rating

MIHW 100x: Input: 4.5 – 9.0Vdc / 820mA 2…5Vdc / 600mA

MIHW 100x: Input: 9 – 18.0Vdc / 320mA 3…12Vdc / 250mA

MIHW 100x: Input: 18 – 36.0Vdc / 155mA 8…24Vdc / 125mA

MIHW 100x: Input: 36 – 75.0Vdc / 80mA 6…±12Vdc / ±125mA

7…±15Vdc / ±100mA

Rating Model MIW, DIW series: x stands for output rating

MIW232x, DIW232x: Input: 9 – 36Vdc / 150mA 1…3.3Vdc/750mA

MIW233x, DIW233x: Input: 18 – 75Vdc / 75mA 2…5Vdc / 600mA

3…12Vdc / 250mA

4…15Vdc / 200mA

6…±12Vdc / ±125mA

7…±15Vdc / ±100mA

This report shall not be reproduced, except in full, without the approval of CSA International.

MASTER CONTRACT:231746

REPORT:1953207 PROJECT:2164653

Page No: 2 Date Issued: April 29, 2009

Rating Model MSKW, DSKW series: x stands for output rating

MSKW202x, DSKW202x: Input: 9 – 18Vdc / 500mA 1…3.3Vdc / 1200mA

MSKW203x, DSKW203x: Input: 18 – 36Vdc / 250mA 2…5Vdc / 1000mA

MSKW204x, DSKW204x: Input: 36 – 75Vdc / 125mA 3…12Vdc / 420mA

4…15Vdc / 335mA

5…±5Vdc / ±500mA

6…±12Vdc / ±210mA

7…±15Vdc / ±165mA

*Notes:

Units were evaluated as components where the suitability of the combination with the host equipment shall be re-evaluated.

The equipment has been evaluated for use in a Pollution Degree1 or 2 and over voltage category II environment.

A suitable Mechanical, Electrical and Fire enclosure shall be provided.

The product is specified for maximum ambient of 70°C

The separation between input and output is functional for model MSKW and MIW and reinforced insulation for model MIHW

BI-NAT CSA 60950-1-03/UL 60950-1, 1st Edition DESIGN MANUAL, REV 2.1 (ISSUED WITH REPORT 231746-1708682) IS AN INTEGRAL PART OF THIS REPORT