PSRL0603D中文资料

AC/DC Switching Power Supply

FEATURES

● 2 Year Warranty

● AC Input Range Auto-Selectable ● Approved to UL CUL TUV CB and CE

● Power Factor Corrected to EN61000-3-2 Class A ● 3.3/ 5/ 12/ 24/ 48V Dual Output Optional Combinations ● Providing Peak Power 600W within 500uS Duty Duration ● Low Leakage Current 500uA @ 240VAC / 300μA @ 120VAC ● U-Chassis & Enclosed with Built-in Fan Mechanical Options ● Smallest 250W with 1U Height Power Density: 10.4 Watts/cu in.

SPECIFICATIONS: PSRL0603D Series

All specifications are based on 25o

C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.

We reserve the right to change specifications based on technological advances.

INPUT SPECIFICATIONS Input Voltage 90 - 132 / 180 - 264 VAC, Auto-Selectable Input Frequency 47 to 63Hz Input Current 6 / 3A at 110 - 120 / 200 - 240 VAC. Inrush Current Max. 70A @ 230VAC and 35A @ 115VAC; cold start. Leakage Current Regular type 1.5mA @240VAC. (Optional for 500μA max. at 240VAC / 300μA max. at 120VAC input). Remote On-Off Designated as RMSW on the CN1, requires a low signal to inhibit output. Hiccough mode. OUTPUT SPECIFICATIONS Output Voltage See Table Output Power Range 250 Watts max with airflow. (See Notes 3 and 4) Output Adjustability Output user adjustable ±5% minimum. Total Regulation ±5% Output Current See Table Ripple & Noise (peak to peak) See Table Transient Response Output voltage returns to within 1% in less than 2.5ms for a 50% load change, peak does not excess 5%. Hold-Up Time 20ms min. at 80% of full load. Overshoot Turn-On & Off overshoot < 5% over nominal voltage. Turn On Delay 1 second maximum at 120VAC. PROTECTION

Over Voltage Protection Unit latching down when output exceeds 130% and recycle AC input to reset. Short Circuit Protection Trip without damage and auto-recovery. Over-Temperature Protection Unit protected of excessive operating ambient 85°C and automatic recovery. Over Power Protection Fold back mode 110-140%; Auto-recovery. Input Fusing Protection One T6A/250V fuse inserted in primary. GENERAL SPECIFICATIONS Switching Frequency 25KHz fixed frequency. Efficiency 70% minimum (Measuring at 230VAC and full load).

Withstand Voltage

1500 VAC input line to chassis (10mA DC cut off current). 3000VAC primary to secondary windings and

1500VAC primary to core. All for 3 sec.

Burn In 45 ±5°C for one hour @ 230VAC with full load. PFC Power factor corrected to EN61000-3-2 Class A.

Power Good

Designated as PG on the CN1 will go high 100-500ms after regulation and goes low 1ms before loss of

regulation.

Power Supply On Green LED designated as LED1 on the PCB. Grounding Test Apply 25A from ground pin of the three prong plug to the far most earth. Max. allowable resistance is 0.1 ohm.

U Type: (U-Chassis): 5(L) x 3.2(W) x 1.5(H) inches.

F Type: (Enclosed with top built-in fan): 5(L) x 3.2(W) x 2(H) inches.

AC/DC Switching Power Supply

SPECIFICATIONS (CONTINUED)

ENVIRONMENTAL SPECIFICATIONS Operating Temperature 0°C to +70°C ambient, de-rating at 2.5% per degree from 50°C to 70°C. Storage Temperature -20°C to +85°C

Operating Humidity 5% to 90% RH, non-condensing Storage Humidity 5% to 95% RH, non-condensing

Vibration 5 ~ 50Hz, acceleration 7.35 m/(s x s) on X, Y, and Z axis.

Cooling

U Type (U-Chassis): 250W max. with forced airflow or 135W under convection cooling. F Type (Enclosed with top built-in fan): 250W max. Fan Drive 12VDC/300mA is available to drive an external fan. MTBF

100,000 hours (according to MIL-HBK-217F) at 30°C.

PHYSICAL SPECIFICATIONS Weight U Type (U-Chassis): 450g

F Type (Enclosed with top built-in fan): 550g

Dimensions U Type (U-Chassis): 5(L) x 3.2(W) x 1.5(H) inches. (Option: Top Cover Type A or B available) F Type (Enclosed with top built-in fan): 5(L) x 3.2(W) x 2(H) inches. Warranty 2 years

SAFETY

EMC Standards CISPR 22 / EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, EN55024 CE Marked (LVD).

Safety Regulations

Approved to UL60950-1, CSA C22.2 No. 60950-1, TUV EN60950-1, and CB certificate available.

OUTPUT VOLTAGE / CURRENT RATING CHART

Output Current

Model Output Voltage

Range Type L (Convection)

Type U (with forced air)

& Type F

Regulation

Ripple & Noise

V 1: +3.3 VDC 12A 24A ±5% 50mV PSRL0603Dx-0312 V 2: +12 VDC 7A 12A ±5% 1% V 1: +3.3 VDC 12A 24A ±5% 50mV PSRL0603Dx-0324 V 2: +24 VDC 4A 6A ±5% 1% V 1: +5 VDC 12A 24A ±5% 1% PSRL0603Dx-0512 V 2: +12 VDC 7A 12A ±5% 1% V 1: +5 VDC 12A 24A ±5% 1% PSRL0603Dx-0524 V 2: +24 VDC 4A 6A ±5% 1% V 1: +5 VDC 12A 24A ±5% 1% PSRL0603Dx-0548 V 2: +48 VDC 2A 3A ±5% 1% V 1: +12 VDC 7A 12A ±5% 1% PSRL0603Dx-1224

V 2: +24 VDC

4A 6A

±5%

1%

NOTES

1. PSRL0603D Series is designated as PSRL0603Dx-y where x can be U (U-chassis type), F (Enclosed with top built-in fan), or L (U-chassis with convection cooling only), y can be 0312, 0324, 0512, 1524, 0548, or 1224.

2. Two optional top covers available (Type A or B) for U-Chassis type. Please call factory for ordering details.

3. Type U (with min. 16CFM forced air) & Type F : Max. 250W total combined power of V 1 and V 2 for PSRL0603Dx-1224 and 200W for other models.

4. Type L (with convection cooling): Max. 135W total combined power of V 1 and V 2 for PSRL0603DU-1224 and 100W for other models.

5. Providing peak power to 600W within 500uS for all models, longer duty duration need contact manufacturer.

6. Ripple and noise is measured from 10KHZ to 20MHz bandwidth at output with parallel 0.1uF ceramic and 22uF electrolytic capacitors.

7. 10% minimum load is required to maintain the ripple and regulation. 8. Output is fully isolated.

AC/DC Switching Power Supply MECHANICAL DRAWINGS

PSRL0603DU Series (U-Chassis Type): 5(L) x 3.2(W) x 1.5(H) inches; Weight: 450g

PSRL0603DU Series (U-Chassis with Type A Cover): 5(L) x 3.2(W) x 1.56(H) inches; Weight: 470g.

AC/DC Switching Power Supply PSRL0603DU Series (U-Chassis with Type B Cover): 5(L) x 3.2(W) x 2(H) inches; Weight: 480g.

PSRL0603DF Series (Enclosed with Top Built-in Fan Type): 5(L) x 3.2(W) x 2(H) inches; Weight: 550g.

AC/DC Switching Power Supply I/O CONNECTOR PIN ASSIGNMENT

Input Connector (CN3): Mating Molex Part No. 09-91-0500 or equivalent (5pin, 3 used) PCB is Labeled: L = Line;

N = Neutral; G = Chassis Ground Mating Pins; Molex Engineering Series 2478, 2578, 8818 or Howder M3. 3 pin Terminal block 6.35MM Center (HD-601-3P).

Output Connector (CN2): Mating Molex Part No. 09-91-0600. Mating Pins: Molex Engineering Series 2478, 2578, 8818. Howder M3. 3 pin Terminal block 8.25MM Center (HD-819-3P).

Connector Pin Assignment:

(See table below).

Power Good, Remote On/Off mating connectors (CN1): Mating JST Part No. XHP-3 or equivalent (CHYAO SHIUNN JS-2001-03). Mating Pins: JST SXH-002T-P0.6 FOR AWG 30 to 26.

Signal Pin Assignment:

Pins 1: Power good .

Pins 2: Remote Switch.

Pins 3: RTN.

Fan Drive: Mating JST Part No. XHP-2 or equivalent (CHYAO SHIUNN JS-2001-02).

Mounting Inserts: 7 Places M3. Maximum Penetration 2.3mm sees outline drawing for location.

OUTPUT PIN CONNECTION

Howder Molex

V2: Pin 1 V2: Pin 1

RTN: Pin 2 RTN: Pins 2 – 5

Pins 6 – 8

V1: Pin 3 V1: