Bolts Screws
Studs
Nuts
Washer
s
Set
Screws Tappin
g Screws
Pins Keys
Ret
ain ing Insert s
Rivets
等效等效参考
参考参考参考参考
ISO4014 - Hexagon head bolts
GB/T5782-2000
ISO8765 - Hexagon head bolts, with fine pitch thr GB/T5785-2000
下列表中DIN 标准和NON 标准没有填写的部分是与国标没有相应的对应关系;参考部分不能完全替代,设计者可根据设计要求进行选择。
DIN7969 - Slotted countersunk head fit bolts for structural steel bolting DIN6921 - Hexagon flange bolts GB/T5787-86DIN609 - Hexagon fit bolts
GB27-88
DIN7968 - Hexagon fit bolts for structural steel bolting
DIN580 - Lifting eyebolts
GB825-88
DIN603 - Round head square neck bolts GB/T14-98DIN444 - Eyebolts GB798-88
等效等效等效等效
等效
等效等效
等效
参考等效
等效
参考等效等效
ISO7047 - Crossed recessed raised csunk head screws
GB/T820-2000六角头螺栓,全螺纹
ISO4018 - Hexagon head screws
GB/T5781-2000
ISO7045 - Crossed recessed pan head screws GB/T818-2000ISO7046 - Crossed recessed csunk flat head screws
GB/T819.1-2000ISO8676 - Hexagon head screws, with fine pitch thread
GB/T5786- 2000
NON1241 - Hexagon head screws, with serrated flange
六角头螺栓
ISO4014 - Hexagon head screws
GB/T5782-2000
ISO4017 - Hexagon head screws
GB/T5783-2000ISO7379 - Hexagon socket head shoulder screws GB5281-85
ISO7380 - Hexagon socket button head screws GB/T70.2-2000ISO4762 - Hexagon socket head cap screws
GB/T70.1-2000
DIN7984 - Hexagon socket thin head cap screws GB6191-86ISO2009 - Slotted csunk head screws
GB/T68-2000
DIN7991 - Hexagon socket flat head screws GB2673-86ISO1580 - Slotted pan head screws GB/T67-2000
等效等效
参考
参考参考参考
参考参考参考
ISO2010 - Slotted raised csunk head screws GB/T69-2000NON1243 - Crossed recessed pan head screws
DIN464 - Knurled thumb screws GB834-88
ISO1207 - Slotted cheese head screws GB/T65-2000
DIN921 - Slotted pan head screws with large head
DIN939FO - Studs (without interference
thread)
GB897-88DIN975 - Threaded rod
GB15389-94
DIN316 - Wing screws
DIN939 - Studs (with interference thread)GB897-88NON9803 - Self-clinching standoffs, thru-hole NON9804 - Self-clinching studs for PC boards NON9801 - Self-clinching studs
NON9802 - Self-clinching standoffs, blind DIN32501SIA - Internal threaded studs for stud welding, tip ignition
GB902.3-89
DIN32500P - Threaded studs for stud welding,non-flanged
GB902.2-89DIN32501GA - Threaded studs for stud welding,
tip ignition
GB902.3-89
等效等效等效等效等效
参考参考参考参考参考参考参考等效等效
ISO4032 - Hexagon nuts GB/T6170-2000ISO8673 - Hexagon nuts with fine pitch threads
GB/T6171-2000ISO8675 - Hexagon thin nuts with fine pitch threads
GB/T6173-2000
ISO4035 - Hexagon thin nuts GB/T6172.1-2000ISO4161 - Hexagon nuts with flange GB/T6177.1-2000DIN935 - Hexagon castle nuts GB/T6178-86DIN917 - Hexagon cap nuts GB923-88NON7201 - Hexagon nuts with serrated flange DIN555 - Hexagon nuts (Nylon)DIN315 - Wing nuts GB62-88DIN562 - Flat square nuts GB39-88DIN7967 - Self-locking (PAL) nuts GB805-88DIN582 - Lifting eye nuts GB825-88ISO7042 - Prevailing torque all-metal hexagon
nuts
GB/T6185.1-2000
DIN929 - Hexagon weld nuts
GB/T13681-92
ISO7040 - Prevailing torque hexagon nuts with
non-metallic inserts
GB/T889.1-2000
等效等效
参考
参考
参考
参考
参考
ISO7719 - Prevailing torque all-metal hexagon
nuts
GB/T6184-2000
NON7203 - Hexagon lock nuts with lock washers NON7204 - Hexagon lock nuts with conical spring washers
ISO7043 - Prevailing torque hex nuts w/flange and non-metallic inserts
GB/T6183.1-2000
NON7202 - Hexagon lock nuts with attached conical spring washers
NON7207 - Self-clinching nuts for printed circuit boards
NON7208 - Self-clinching nuts NON7205 - Self-clinching nuts
NON7206 - Rivet nuts
DIN435 - Square beveled washers for I-beams (14%)
GB852-88DIN128A - Curved spring lock washers
GB7245-87DIN508 - T-nuts
DIN434 - Square beveled washers for channels
(8%)
GB853-88
DIN127 - Helical spring lock washers GB93-87DIN137 - Spring washers, wavy GB955-87
参考
参考
参考
等效
等效
参考
参考
参考
参考
参考
DIN6796 - Conical spring washers
DIN2093 - Disc springs
DIN6798A - External serrated lock washers GB861.2-87NON1301 - Internal tooth lock washers (cupped)
DIN6797A - External tooth lock washers washers
GB862.1-87DIN6797J - Internal tooth lock washers washers
GB861.1-87ISO7093 - Plain washers - large series GB/T96.1-2002GB/T96.2-2002
ISO7416 - High-strength structural washers GB/T97.2-2002NON1302 - Internal/external serrated lock washers
ISO7089 - Plain washers - normal series GB/T97.1-2002DIN463 - Tab washers with long and short tabs GB855-88DIN93 - Tab washers with long tabs GB854-88DIN7989A - Plain washers for steel construction
DIN7349 - Plain washers, thick
GB96-85DIN432 - Locking tab washers GB856-88
参考
等效
等效
等效
等效
等效
等效
等效
等效
等效
等效
DIN6319C - Spherical washers DIN6319G - Conical seats
GB849-88GB850-88
ISO4026 - Hexagon socket set screws with flat
point
GB/T77-2000
DIN5419 - Felt rings ISO4029 - Hexagon socket set screws with cup point
GB/T80-2000ISO4766 - Slotted set screws with flat point GB73-85ISO4027 - Hexagon socket set screws with cone
point
GB/T78-2000
ISO4028 - Hexagon socket set screws with dog point
GB/T79-2000ISO7050 - Crossed recessed countersunk flat head tapping screws
GB846-85ISO7051 - Crossed recessed raised csunk head tapping screws
GB847-85ISO7434 - Slotted set screws with cone point GB71-85ISO7049 - Crossed recessed pan head tapping screws
GB845-85
ISO1479 - Hexagon head tapping screws
GB5285-85
等效
等效
等效
参考
参考
参考
参考
参考
参考
参考
参考参考
ISO1482 - Slotted countersunk head tapping screws
GB5283-85ISO1483 - Slotted raised countersunk head tapping screws
GB5284-85ISO1481 - Slotted pan head tapping screws GB5282-85DIN7500M - Crossed recessed countersunk head thread rolling screws
GB6561-86NON1242 - Crossed recessed oval head thread rolling screws
DIN7500C - Crossed recessed pan head thread rolling screws
GB6560-86DIN7500D - Hexagon head thread rolling screws GB6563-86DIN7504P - Crossed recessed countersunk head self-drilling screws
GB/T15856.2-95DIN7997 - Crossed recessed countersunk head wood screws
GB951-86DIN7504N - Crossed recessed pan head self-drilling screws
GB/T5856.1-95
DIN7504K - Hexagon head self-drilling screws GB/T15856.4-95TYPE A w/o split pin hole
TYPE B w/ split pin hole
ISO2340 - Clevis pins, without head
GB880-86ISO2341 - Clevis pins, with head
GB882-86
参考
等效
等效
等效
等效
等效
等效
等效
等效
等效
ISO8748 - Spring-type straight pins coiled,heavy duty
GB/T879.3-2000
ISO8750 - Spring-type straight pins coiled,standard duty
GB/T879.4-2000DIN1434 - Clevis pins, with head
(DIN1434 has been cancelled, superseded by ISO2341)
GB882-86
TYPE A w/o split pin hole
TYPE B w/ split pin hole
ISO8744 - Grooved pins, full-length taper grooved
GB/T13829.2-92(TYPEA)ISO8745 - Grooved pins, half-length taper grooved
GB/T13829.2-92(TYPEB)ISO8740 - Grooved pins, full-length parallel grooved with chamfer
GB/T13829.1-92(TYPEB)ISO8741 - Grooved pins, half-length reverse taper grooved
GB/T13829.2-92(TYPEC) ISO2338 - Parallel pins, unhardened
GB/T119.1-2000
TYPE A
TYPE B
ISO8752 - Spring-type straight pins, slotted GB/T879-2000
NON8101 - Spring-type straight pins, with serrated slot
ISO2339 - Taper pins, unhardened
GB/T117-2000
TYPE A
等效
参考
等效
参考
参考
参考
参考
ISO8737 - Taper pins with external thread,unhardened
GB/T881-2000
DIN6325 - Parallel pins, hardened (Dowel pins)
GB119.2-2000
TYPE B
TYPE A
TYPE B
ISO1234 - Split pins GB/T91-2000
Keys
DIN6885 - Rectangular or square parallel keys GB/T1096-1979
TYPE B
DIN6887 - Taper keys with gib head GB/T1565-1979
DIN6886 - Taper keys GB/T1564-1979
TYPE A
DIN6888 - Woodruff keys GB/T1099-1979
Retaining Rings
参考参考参考参考DIN472 - Retaining rings for bores, normal duty GB893.2-86DIN6799 - Circlips GB896-86DIN471 - Retaining rings for shafts, normal
duty
GB894.2-86DIN16903 - Insert nuts for plastic moldings
DIN660 - Round head rivets
GB867-86DIN988 - Shim rings and Supporting rings
NON25101 - Helical coil inserts
C级