19寸屏规格书M190MWW1-401_402product_information__20080310
Document No. Issue date2008/3/10 Revision04 TO:
MTDis Product Information
Model Name: M190MWW1
- 401&402
Issue date: 2008/3/10
Product Development and
Customer
Customer Engineering Division
Note: 1. Please contact MTDis Corp. before designing your product based on this product.
2. The information contained herein is presented merely to indicate the characteristics and performance
of our products. No responsibility is assumed by MTDis for any intellectual property claims or other
problems that may result from application based on the module described herein.
Document No.
Issue date
2008/3/10 Revision
04
Revision Date Page
Old Description
New Description
Remark
01 200712/10 -- -- First issued. -
02
2008/1/4
28
--
Add the 23 Product Code
- 20 --
Note (1) This product is DE only mode. The
input of Hsync & Vsync signal does not have
an effect on normal operation.
(2) Internal Vcc= 3.3V.
03 2008/1/16 21
Figure13 old image Figure13 new image 24
Figure15 old image Figure15 new image 04 2008/2/18 25
Figure16 old image
Figure16 new image
Document No. Issue date2008/3/10 Revision04
Contents
1.0 General Descriptions ……………………………….… p.4
2.0 Absolute Maximum Ratings ………………………….. p.6
3.0 Pixel Format Image ……………………………….. p.7
4.0 Optical Characteristics …………………………………… p.8
Backlight
Characteristics…………………….. p.11
5.0
6.0 Electrical Characteristics ………………….………. p.13
7.0 Interface Timings…………………………………… …… p.20
8.0 Power Consumption …………………………….… …… p.22
9.0 Power ON/OFF sequence …………………………………….p.23
10.0 Mechanical Characteristic……………………………………..p.24
11.0 Package Specification ……. …………………………….. p.27
12.0 Lot Mark…. …………………………………………………… p.28
13.0 General Precaution …………………………………………… p.29
14.0 Inspection Standards for LCD Modules……………………… p.31
Document No. Issue date2008/3/10 Revision04 1.0 GENERAL DESCRIPTIONS
1.1 Introduction
The M190MWW1 is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. It is composed of a TFT LCD panel, a timing controler, voltage reference, common voltage, driver DC-DC converter, column driver, and row driver circuit. This TFT LCD has a 19-inch diagonally measured active display area with WXGA+ resolution (1440 vertical by 900 horizontal pixel array).
1.2 Features
■ 19”WXGA+ TFT LCD Panel
■ 4 CCFLs Backlight System
■ Supported WXGA+ (V:1440 lines, H:900 pixels) resolution
■ Supported to 75Hz Refresh Rate
■ Compatible with RoHS Standard
1.3 Product Summary
Items Specifications Unit
Screen Diagonal 19.05 inch Inch
Active Area 410.4(H) x 256.5(V) mm
Pixels H x V 1,440 (x3) x 900
Pixel Pitch 0.285 (per one triad) x 0.285 mm
Pixel Arrangement R.G.B. Vertical Stripe
Display Mode Normally White
White Luminance 300 typical cd/ m2(CCFL 7.0mA)
Contrast Ratio 1000 : 1 typical
Color Saturation72% NTSC
Response Time 5 typical msec
Input Voltage + 5.0 typical V
Logic Power Consumption 2.6 typical (Black pattern, 60Hz) Watt
Backlight Power Consumption 21.0 typical (CCFL current 7.0mA) Watt
Weight 2,500 maximum g
Outline Dimension 427.2 (W) x 277.4 (H) x 15.5 (T) typical mm
Electrical Interface (Logic) 6bit+Hi-FRC dual LVDS
Support Color 16.7M
Lamp Life Time 50,000(Ta=25+/-3degC and
ICCFL=7.0mA, brightness becomes
lower than 50% of initial value)
Hours
Luminance Uniformity 1.3 typical (@9 points) Optimum Viewing Direction 6 o’clock
Document No. Issue date2008/3/10 Revision04
1.4 Functional Block Diagram
.
Figure 1 shows the functional block diagram of the LCD module.
Figure 1 Block Diagram
Document No.
Issue date
2008/3/10 Revision
04
2.0 Absolute Maximum Ratings
Item
Symbol Min Max Unit
Conditions
Supply Voltage VDD -0.3 +6.0 V
Input Signal
-0.3 +2.7 V LVDS signals
Operating Temperature TOP 0 +50 Deg. C (Note) Operating Humidity HOP 10 80 %RH (Note) Storage Temperature TST -20 +60 Deg. C (Note) Storage Humidity
HST
10
90
%RH (Note)
Vibration 1.5 10-200-10
G
Hz 30min for X, Y, Z axis
Shock
50 11
G Ms Half sign wave
CCFL Current
ICCFL
-
7.5
mArms
Note (1)Storage /Operating temperature. Maximum Wet-Bulb should be 39 degree C.
No condensation.
Document No. Issue date2008/3/10 Revision 04 3.0 Pixel Format Image
Figure 2 shows the relationship of the input signals and LCD pixel format image.
Figure 2 Pixel Format
1439 1440
899
900
Document No.
Issue date
2008/3/10 Revision
04
4.0 Optical Characteristics
The optical characteristics are measured under stable conditions as following notes
Table 1 Optical characteristics
Specification
Item
Conditions
Min
Typ.
Max
Note
Horizontal 140 160 -- Viewing Angle [degrees] K=Contrast Ratio>10 Vertical 140 160 --
A, B Contrast ratio
750 1000 -- A, C Response Time [ms] Rising + Falling -- 5 10 A, D Red x 0.653 A, Red y 0.334 A, Green x 0.299 A, Green y 0.605 A, Blue x 0.142 A, Blue y 0.064 A, White x 0.313 A, Color Chromaticity (CIE1931)
White y
-0.03
0.329
+0.03
A, White Luminance [cd/m^2] ICCFL=7.0mA 250 300 -- Center A, E
Luminance Uniformity
ICCFL=7.0mA, 9points
--
1.3
1.4 A, F
Note: A. Measurement Setup:
The LCD module should be stabilized at given temperature for 20 minutes to avoid abrupt temperature change during measuring. In order to stabilize the luminance, the measurement should be executed after lighting backlight for 20 minutes in a windless room.
Figure 3 Measurement Setup
Document No.
Issue date
2008/3/10
Revision
04
B. Definition of Viewing Angle
Figure 4 Definition of Viewing Angle
Normal θ
C. Definition of Contrast Ratio (CR)
The contrast ratio can be calculated by the following expression
Contrast Ratio (CR) = L255 / L0
L255: Luminance of gray level 255, L0: Luminance of gray level 0
D. Definition of Response Time (T
R , T F )
Figure 5 Definition of Response Time
time
Optical
Response
90%
10%0%
Document No.
Issue date
2008/3/10 Revision
04
E. Definition of Luminance White Measure the luminance of gray level 255 at center point
F. Definition of Luminance Uniformity(Variation)
Measure the luminance of gray level 255 at 9 points.
)
9,2,1min()
9,2,1max(UNF(9pts)L L L L L L L L =
Figure 6 Measurement Locations of 9 Points
Document No. Issue date2008/3/10 Revision04
5.0 Backlight Characteristics
5.1 CCFL Connector
Table 2 Connector Name / Designation
Manufacturer Yeonho
Type / Part Number 35001HS-02 or equivalent
Table 3 Signal assignment
Pin # Signal Name
1 Lamp High Voltage
2 Lamp Low Voltage
5.2 Parameter Guideline for CCFL Inverter
Table 4 Parameter guideline for CCFL Inverter
SYMBOL PARAMETER MIN Design Point MAX UNITS CONDITION
=25[deg
C]
(L255) White Luminance (Center) 250 300 -- [cd/m2] Ta
C] current 3.0 7.0 7.5 [mArms] Ta=25[deg
ICCFL CCFL
(Note A)
=25[deg
C] FCCFL CCFL
Frequency 40 50 60 [kHz] Ta
(Note B)
=0[deg
C]
Ta
-- -- 1720
[Vrms]
(Note C)
VCCFLi Inverter Ignition Voltage
C]
=25[deg
-- -- 1570
Ta
(Note C)
VCCFL CCFL Voltage 650 723 796 [Vrms] @ ICCFL=7mA
Ta=25[deg C]
Note:
A. If it exceeds MIN/MAX values, then "CCFL Life", "ON/OFF Cycle", and "SAFETY" will not
be guaranteed.
B. CCFL Frequency should be carefully determined to avoid interference between inverter
and TFT LCD.
C. The voltage over specified value (VCCFLi) should be applied to the lamp more than 1
second after startup. Otherwise, the lamp may not be turned on. The used lamp current is
the lamp typical current. The inverter should be able to give out a power that has a generating
capacity of over 1720 https://www.wendangku.net/doc/c115578009.html,mp units need to over 1720voltage for ignition.
Document No. Issue date2008/3/10 Revision
04
D. The distortion tae of the waveform should be within 2±10%
The inverter output waveform should be better similar to the ideal sine wave.
Asymmetry rate = |I p-I-p| / I rms x100%
Distortion rate = I p (or I-p) / I rms
Figure 7 Recommendation of Lighting Waveform
Document No. Issue date2008/3/10 Revision04
6.0 Electrical Characteristics
6.1 Interface Connector
Table 5 Connector Name / Designation
Manufacturer JAE (or equivalent)
Type / Part Number UJU IS100-L30R-C23(A)
Mating Receptacle/Part Number JAE FI-X30H(L), JAE FI-X30C*(L), JAE FI-X30M*
Table 6 Signal pin assignment
Pin # Signal Name Description Remarks
1 RXinO0- LVDS differential data input
2 RXinO0+ LVDS differential data input
3 RXinO1- LVDS differential data input
4 RXinO1+ LVDS differential data input
5 RXinO2- LVDS differential data input
6 RXinO2+ LVDS differential data input
7 GND Ground
8 RXOC- LVDS differential data input
9 RXOC+ LVDS differential data input
10 RXinO3- LVDS differential data input
11 RXinO3+ LVDS differential data input
12 RXinE0- LVDS differential data input
13 RXinE0+ LVDS differential data input
14 GND Ground
15 RXinE1- LVDS differential data input
16 RXinE1+ LVDS differential data input
17 GND Ground
18 RXinE2- LVDS differential data input
19 RXinE2+ LVDS differential data input
20 RXEC- LVDS differential data input
21 RXEC+ LVDS differential data input
22 RXinE3- LVDS differential data input
23 RXinE3+ LVDS differential data input
24 GND Ground
25 GND Ground
26 NC Reserved for LCD manufacturer.
Document No. Issue date2008/3/10 Revision04
Supply
28 VCC Power
Supply
29 VCC Power
30 VCC Power
Supply
All input signals shall be low or Hi-Z state when VDD is off.
Document No. Issue date2008/3/10 Revision04
6.2 LVDS Receiver
6.2.1 Signal Electrical Characteristics for LVDS Receiver
The built-in LVDS receiver is compatible with ANSI/TIA/TIA-644 standard.
Table 7 LVDS Receiver Electrical Characteristics
Parameter Symbol Min Typ Max Unit Conditions Differential Input High Threshold Vth -- -- +100mV Vcm=+1.2V Differential Input Low Threshold Vtl -100-- -- mV Vcm=+1.2V Magnitude Differential Input Voltage |Vid| 100-- 600mV
Common Mode Voltage Vcm 1.0 1.2 1.4 V Vth - Vtl = 200mV Common Mode Voltage Offset ?Vcm -50-- +50mV Vth - Vtl = 200mV Note:
A. Input signals shall be low or Hi-Z state when VDD is off.
B. All electrical characteristics for LVDS signal are defined and shall be measured at
the interface connector of LCD.
Table 8 Timing Requirements
Parameter Symbol Min Typ Max Unit Conditions Note
Clock
Frequency
Fc 44.375 53.25 68.375MHz
Input Data Skew Margin Trskm -850 +850
ps Fc=44.5MHz, |Vth-Vtl| =
400mV
Vcm = 1.2V, ?Vcm = 0
(Figure 11) Note: All values are at VDD=5.0V, Ta=25 degree C.
Document No. Issue date2008/3/10 Revision04
Figure 8 Voltage Definitions
Figure 9 Measurement System
Document No. Issue date2008/3/10 Revision04
Figure 10 Data mapping
Document No. Issue date2008/3/10 Revision04
Figure 11 Timing Definition
Note: Tsu and Thd is internal data sampling window of receiver. Trskm is the system skew margin; i.e., the sum of cable skew, source clock jitter, and other inter-symbol interference, shall be less than Trskm.
Document No.
Issue date
2008/3/10 Revision
04
6.2.2 LVDS Receiver Internal Circuit
Figure 12 LVDS Receiver Internal Circuit shows the internal block diagram of the LVDS receiver. This LCD module equips termination resistors for LVDS link.
Figure 12 LVDS Receiver Internal Circuit
100
100
100
100
100
Document No. Issue date2008/3/10 Revision04
7.0 Interface Timings
7.1 Timing Characteristics
Table 9 Interface timings
Parameter Symbol Unit Min Typ Max LVDS Clock Frequency(dual) Fdck MHz44.37553.25 68.375
H Total Time Htotal clocks800 952 968
H Active Time Hac clocks720 720 720
V Total Time Vtotal lines910 934 1050
V Active Time Vac lines900 900 900
Frame Rate Vsync Hz 50.060.0 75.0
Note (1) This product is DE only mode. The input of Hsync & Vsync signal does not have an effect on normal operation.
(2) Internal Vcc= 3.3V.
规格承认书
规格承认书 SPECIFICATION FOR APPROV AL 1. 普通规格(General Specification) 项目(item) 规格/条件(Specification/Condition) 1.1 型号(Mode No.) FRDM5015S12-3M 1.2 外形尺寸(Outline) 50*50*10mm 1.3 额定电压(Rated V oltage) DC 12V 1.4 操作电压(Operating Voltage Range) 10.8~13.2V 1.5 起动电压(Starting V oltage) DC 6V MAX 额定电流(Rated Current) 0.16A ±10% 1.6 制动电流(Locked Current) 0.20A ±10% 1.7 消耗功率(Power Consumption) 1.92W ±10% a. 额定电压(Rated V oltage) b. 25℃,65% RH c. 6V 风扇起动 d. 9~13.2V 闪字正常 1.8 转速(Speed) 4000±10% R.P.M a. 25℃,65% RH b. 自由空气(Free Air) c. 额定电压(Rated V oltage) 1.9 最大风量(Max. Airflow) 4.6CFM(ft 3/min) 1.10 最大静压(Max. Static Pressure) 2.1mm-H 2O a. 额定电压(Rated V oltage) b. AMCA 标准(Standard) c. 额定电流(Rated Current) 1.11 噪音水准(Noise Level) 29.4dB(A) a. 额定电压(Rated V oltage) b. 无音室测试(Measured in a Non-Echo Chamber) c. CNS 8753标准(Standard) d. ISO 3744 测试条件(Test Condition) 1.12 寿命(Life) 25,000/hrs 25℃ MTBF(Mean Time to Failure) Conf. Level 90% 1.13 扇叶数(No. of Blade) 9叶(Blades) 1.14 磁极数(No. of Pole) 4极(Poles) 1.15 运转方向(Rotating Direction) 逆时针 1.16 热插拔(Hot Insert Pull out) 没有时间差，文字显示正常，不会产生乱码。 2. 电气规格(Electrical Specification) 项目(item) 规格/条件(Specification/Condition) 2.1 扇叶旋转锁定 (Locked Rotor Protection) 额定电压锁住24小时,回路不烧毀 (Circuit is protected after at rated voltage for 24 hours) 2.2 极性保护 (Polarity Protection) Vcc 与GND 反接时, 回路不烧毀。 (Circuit is protected when Vcc & GND are exchanged) 2.3 绝缘阻抗 (Insulation Resistance) 10M Ω/裸线与外框间测量, 600VDC/min 。 (10 M Ω/b/W unshielded wire and frame at 600VDC/min) 2.4 绝缘`耐压 (Dielectric Strength) 0.05mA MAX/ 导线与外框间测量, 500 V AC/ mim 。 (0.05 mA MAX/Measured b/w lead wire (+) and frame at 500V AC/ MIN Page 2
表面声波式触摸屏规格书(doc)
普通声波触摸屏简介 产品具有高透明度，高强度，高透光率等特点。 高密度触摸点分布:超过10000个触摸点每一平方英寸。 触摸无漂移，自动修正，可进行精密操作。 经久耐用，单点触摸可超过5千万次。 声波屏不再怕灰尘，实现免维护。 - 可用手指，软笔进行触摸。 可根据客户需要定制产品，屏体厚度范围在1.1-6mm，尺寸范围可 根据客户要求定做。如球面CRT触摸屏、平面CRT、LCD和球面CRT 等多种类型的触摸屏。 防爆屏 其材质均采用钢化玻璃，具有优良的抗冲击性能，是普通玻璃强度的3-5倍。即使破裂，碎片对人 体也不会造成伤害，可非常安全的应用于各种工业、无人值守和人流量大的公众场所。其中： 1.6mm厚度防暴屏可承受重量为1040克、直径Φ=63.5mm的钢球以1米高度自由落体于玻璃中央而 不破碎。 2.5mm厚度防暴屏可承受重量为1040克、直径Φ=6 3.5mm的钢球以1米高度自由落体于玻璃中央而 不破碎。
3.4mm厚度防暴屏可承受重量为227克、直径Φ=38.0mm的钢球以2米高度自由落体于玻璃中央而不破碎。 4.3mm厚度防暴屏可承受重量为66.9克、直径Φ=2 5.4mm的钢球以1.27米高度自由落体于玻璃中央而不破碎。 该类触摸屏除具有普通屏的性能以外，还具有以下的性能： 强化玻璃是将平板玻璃加热到接近软化点时，在玻璃表面进行均匀的急速冷却，使玻璃表面产生压应力，内部为张应力，从而提高了玻璃的强度和热稳定性。当出售的外力超过其强度破碎时，碎片似蜂窝状，具有良好的安全性能。 同等厚度的强化玻璃抗冲击强度是普通玻璃的3-5倍，抗弯强度是普通玻璃的2-5倍。 当玻璃被外力破坏时，碎片成为钝角的细小颗粒，减少对人体的伤害。 可耐温度的急速变化，耐热冲击性能好。例如：5mm强化玻璃约可耐温220℃变化。 规格：2.8-6mm（全强化） 1.8-2.5mm（热硬化） 尺寸：所有声波屏均可进行强化处理。 强化玻璃检验测试结果
诺瓦科技LED显示屏控制台C1规格书
C1 Desktop Console Specifications Xi’an NovaStar Tech Co., Ltd.
Copyright ?2018 Xi’an NovaStar Tech Co., Ltd. All Rights Reserved. No part of this document may be copied, reproduced, extracted or transmitted in any form or by any means without the prior written consent of Xi’an NovaStar Tech Co., Ltd. Trademark is a trademark of Xi’an NovaStar Tech Co., Ltd. Statement You are welcome to use the p roduct of Xi’a n NovaStar Tech Co., Ltd. (hereinafter referred to as NovaStar). This document is intended to help you understand and use the product. For accuracy and reliability, NovaStar may make improvements and/or changes to this document at any time and without notice. Any problem in use or any good suggestion, please contact us through ways provided in the document. We will do our utmost to solve the problems and adopt the suggestions after evaluation as soon as possible. Website:http://w ww.novastar.te c h
友达5.7寸液晶屏G057VTN01 V0规格书-杭州旭虹科技有限公司
G057VTN01 V0 Color TFT-LCD Module 5.7” VGA Landscape LED Backlight Wide Temperature Range Mercury-free solution RoHS and Halogen-free Compliance High Shock/Vibration Resistance Outline and Interface are fully compatible with G057VN01 serials (Preliminary) Size (inch) 5.7” Model G057VN01 V210 Resolution (pixel) 640(RGB) x 480 Active Area (mm) 115.2(H) x 86.4(V) Pixel Pitch (mm) 0.18 x 0.18 Mode TN LCD Surface Anti-Glare, Hardness 3H Number of Colors 262K View Angle (L/R/U/D) 80/80/70/70 (typ.) Brightness(nit) (25℃) 500(min.), 600 (typ.) Contrast Ratio (25℃) 800:1 (typ.) Response Time (ms) 25 (typ.) LED Life (hrs.) 50K Power Consumption (W) 3.74W Supply Voltage (V) 3.3V Storage Temp. (℃) -30 ~ 85 Operation Temp. (℃) -30 ~ 85 Outline Dimension (mm) 144.0(H) x 104.6(V) x 12.3(D) (typ.) Weight (g) 150g (typ.), 165g (max.) Interface CMOS
触摸屏规格书21.5寸
触摸屏规格承认书 Analog Touch panel Specification 品名/Product Name：电容式触摸屏模组 机种名/Product Number： HKCZ-21.5CTP-023 客户名称/ CUSTOMER NAME： 客户确认/CUSTOMER APPROVE： 日期/APPROVE DATE: 客户签核 承制方签核
目录 目录 (2) 适用范围 (3) 变更记录 (3) 1.产品规格 (5) 1.1 产品尺寸 (5) 1.2 产品结构 (5) 1.3 产品参数 (5) 1.4 产品功耗 (6) 1.5 产品使用、保存环境 (6) 2.可靠性标准规范 (6) 3.结构图纸 (7) 6.注意事项 (8)
适用范围 本规格书为明确规范本公司产品触控面板性能而订定，当本规格书与其它个别规格书内容有抵触情况发生时，仍以本规格书标准为最优先。本规格书内容如有项目不足或内容需变更时，须经由会议讨论后另订之。 This specification defines performance of input surfaces for our transparent analog touch panels. In the event of a conflict between this specification and applicable individual specification, this specification takes precedence. Items missing from this specification are to be decided subject to discussion. 变更记录
P6户外全彩LED显示屏规格书
P6户外表贴全彩LED显示屏规格书 绿色大地P6户外表贴全彩LED显示屏显著特点： ■采用高端优质芯片，屏体亮度达6500CD每平方以上绿色大地照明科技充分满足户外亮度要求；亮度100级可调。 ■采用高端电源供应商电源,100-230V宽电压输入，切实保证屏体供电稳定。 ■与IC行业巨头台湾聚积携手，装配高精度驱动芯片，显示画面展现完美的色彩一致性。■采用行业领先控制系统，真正实现逐点校正功能。 ■箱体融入最先进设计理念，结构轻巧，安装便捷，样式美观。 ■全新面罩设计，大大提升屏体对比度及平整度，同时新款面罩具有强劲的抗干扰与抗老化功能。 ■PCB板精选板材，1.5 OZ铜厚，加上独特的PCB板设计工艺，使显示屏稳定性更高、节能性更强、功耗更低。
P6户外表贴屏箱体（480*480MM）4*2个箱体效果图
P6户外表贴显示屏还有如下特点 1）、系统设计先进合理，显示效果清晰稳定，安装维护方便。 2)、全天候工作：色彩逼真、刷新频率高、防静电、散热效果好、性价比高。 3)、显示方式：左右移动、上下移动、左拉幕、右拉幕、中开合、闪烁、即显等多种方式。 4)、使用节目编辑播放软件，可通过、鼠标编辑、增加、删除和修改文字、图形、图像等信息。编排的内容存于控制卡， 信息播放按节目表自动循环显示。 5)、发光亮度强：发光强度强，并且亮度可调。 6)、视角度好：在水平和垂直均有较大的可视角度，这对水平分布广和高度落差较大的环境均适合。 7)、效果好：采用非线性逐点校正技术，文字更清晰、层次感更强； 8)、可靠性强：采用分布式扫描技术和模块化设计技术，可靠性、稳定性更高； 9)、显示模式多样化：支持多种显示模式； 10)、操作方便：电脑编辑内容发送到系统控制卡，就可显示编辑的内容，系统操作十分方便。 11)、适用范围：商场、企业、学校、舞台、银行、证券、公安、交通、工商、电力、海关、 医院、公园、机场、车站、 体育场馆等领域户外租赁显示。 P3全彩显示屏技术参数 LED 屏体波长控制在2.5nm 之内，屏体亮度≥ 6500cd/㎡
广州大彩串口屏F系列7寸电阻触摸屏产品手册
产品手册 DC80480F070_1000_0T 数据手册V1.0V1.0V10.V1.0 Product Datasheet 广州大彩光电科技有限公司 版权所有
目录 1.硬件介绍 (1) 1.1硬件配置 (1) 1.2调试工具 (1) 2.产品规格 (2) 3.可靠性测试 (4) 4.产品尺寸 (5) 5.产品定义 (6) 6.产品架构 (7) 7.开发软件 (8) 7.1什么是虚拟串口屏 (8) 7.2Keil与虚拟串口屏绑定调试 (9) 8.开发文档 (10)
1.硬件介绍 以下主要介绍产品的一些硬件配置信息和调试所需工具。 1.1硬件配置 以下为该产品硬件配置图，如图1-1所示。 图1-1硬件配置图 1.2调试工具 以下为该产品调试工具参考图，如图1-2所示。 图1-2调试工具图
2.产品规格 ◆产品参数 产品型号DC80480F070_1000_0T(电阻触摸)产品系列F系列 核心处理器*32位大彩深度定制专用处理器 操作系统嵌入式实时操作系统，上电即可运行协议类型大彩组态指令集 尺寸7.0寸 分辨率800*480 存储空间64Mbit 字库内置矢量字体，边缘抗锯齿处理，包含任何大小点阵ASCII、GBK、GB2312、UNICODE 字库，可自定义任意电脑字体显示 图片存储支持JPEG、PNG（半透/全透）压缩，支持任意大小图片存储。累加可存储约56张全屏图片(按大小130KB/张计算，不建议BMP格式)。图片压缩比不同，此值会上下浮动 颜色65K色，16位RGB 电压5-15V(误差±0.2V) 功耗背光最亮：3.1W；关背光：0.85W 通讯接口RS232/TTL(出厂默认232电平) 接口规格默认PH2.0-8P，可选配FPC1.0-10P 图片下载UART/SD卡（U盘预留） 外部键盘不支持 实时时钟(RTC)选配（支持倒计时、定时器、年月日等时间显示）屏有效显示区（AA）长×宽=155.0mm×87.0mm 产品尺寸长×宽×高=188.9mm×105.1mm×16.1mm 配套上位机软件VisualTFT? AV输入不支持 声音播放WAV、MP3音频格式(喇叭4Ω2W，单声道)，与图片共用存储空间。若mp3格式的采样率为128kbps，占用存储0.92MB/分钟 视频播放不支持 以太网不支持 WIFI不支持 ◆产品核心竞争力 学习周期30分钟熟悉开发环境，3天完成人机交互设计 程序调试上位机集成了“虚拟串口屏”，无需连接硬件，直接Keil IDE与其绑定调试启动时间上电即运行，无系统加载时间 组态控件拥有按钮、文本、下拉菜单、进度条、滑块、仪表、动画、二维码、曲线、数据记录、等各种组态控件 系统键盘内置虚拟数字、字符键盘，支持中英文输入法，可自定义键盘数据记录支持数据记录控件内容导出到SD卡 开机画面更换不支持 图层技术系统内置多个显示图层，切换速度更快
OLED2.4寸显示屏 液晶屏 规格书
、结构尺寸Structure Size 一5V 供电5V IO 电平二、接口定义Pin Assignment(P2&P3)序号（No.） 定义（SYMBOL ）说明（Description ）1 VCC3.3数字电路电源电压Power Supply for Logic Circuit 2 VCC3.3数字电路电源电压Power Supply for Logic Circuit 3 EN 模块13v OLED 供电使能信号，高有效OLE Panel Power Enable Signal active High to Enable ，默认内部弱上拉，可不接。4 GND 数字电路电源地Ground of Logic Circuit 5 CS 片选信号Chip Select 低有效，6 RES 复位信号Power Reset 低有效，需IO 引脚控制7 D/C 数据与命令控制信号Data/Command Control 高为数据，低为命令。需IO 引脚控制8 GND 数字电路电源地Ground of Logic Circuit 9 SCLK SPI 时钟信号Serial Clock of SPI 。需IO 引脚控制10SDIN SPI 输入信号Serial Data of SPI 。需IO 引脚控制 ＯＬＥＤ２．４寸１３０９＿３．３Ｖ
一、产品介绍General Specifications Diagonal Size尺寸 2.4” Color颜色Yellow、Green、Blue、White Type类型Monochrome Pixel Number分辨率128x64 Module Size(mm)模组尺寸62.1×53.3×9 Active Size(mm)显示区域55.01×27.49 Driver IC驱动IC SSD1309 Interface接口4_Wire SPI Supply Voltage供电电压 3.3V Voltage Range建议电压范围 1.65V~3.3V Max Voltage最大极限电压4V Min Voltage最小极限电压 1.65V View Angle视角>160degree全视角 Contrast对比度>10000:1 Brightness(cd/m2)亮度（绿色）120(Typ)@13V（20000Hours） Power功耗由点亮的像素决定 30%像素点亮<260mw 50%像素点亮<345mw 100%像素点亮（实际使用中用不到）<515mw Brightness(cd/m2)（黄色）80(Typ)@13V（15000Hours） Power功耗由点亮的像素决定 30%像素点亮<260mw 50%像素点亮<380mw 100%像素点亮（实际使用中用不到）<590mw Brightness(cd/m2)（白色）80(Typ)@13V（30000Hours） Power功耗由点亮的像素决定 30%像素点亮<300mw 50%像素点亮<440mw 100%像素点亮（实际使用中用不到）<690mw Brightness(cd/m2)（蓝色）80(Typ)@13V（15000Hours） Power功耗由点亮的像素决定 30%像素点亮<325mw 50%像素点亮<470mw 100%像素点亮（实际使用中用不到）<720mw Weight(g)重量8.6 Assembly连接方式10Pin1.0mm FPC Connector and2.54mm Metal pins
电容屏规格书word版
CAPACITIVE TOUCH PANEL SPECIFICATION
CONTENT:目录 1. GENERAL SPECIFICATION 产品规格 1-1. Product name 产品名称 1-2. Product No. 产品编号 1-3. Drawing No. 图纸版本 1-4. Code No. 样品编号 2. BASIC FEATURES 基本特征 2-1 Dimension 尺寸 2-2 Construction 结构 2-3 Surface Hardness 表面硬度 2-4 Scope 应用方式 2-5 Application 应用范围 3. MECHANICAL CHARACTERISTICS 机械性能 3-1 Operation distance 操作距离 3-2 Package drop 包装后跌落测试 3-3 FPC bending test FPC弯折测试 4. ELECTRICAL CHARACTERISTICS 电气特性 4-1 Insulation 绝缘性 4-2 Supply voltage for logic 电压 4-3 Supply current for logic 电流 5. OPTICS CHARACTERISTICS 光学特性 5-1 Light transmissivity 光透过率 6. RELIABILITY 可靠性 6-1 Operating temperature and humidity 操作温度和湿度6-2 Storage Temperature and humidity 存储温度和湿度6-3 Humidity resistance 湿度抗性 6-4 Heat resistance 抗热性 6-5 Cold resistance 抗低温性 6-6 Thermal shock 热冲击 6-7 Vibration resistance 抗振动 7. BLOCK DIAGRAM 原理框图 7-1 IC Pin Configuration IC 脚定义 7-2 BLOCK DIAGRAM 原理框图 8. DRAWING 图纸
诺瓦科技LED控制器MCTRL600规格书英文版
Specifications Independent Controller MCTRL600 V2.1.0 NS110100121 X i ’a n N o v a S t a r T e c h C o ., L t d .
Overview MCTRL600 is an advanced model of Nova controllers, which supports extra-large resolution. With HDMI/DVI video input and four Ethernet port outputs, a single unit is able to load 2560×960. Multiple units can be cascaded for uniform control. Feature 1) HDMI/DVI input; 2) HDMI/external audio input; 3) 12bit/10bit/8bit HD video source; 4) Resolution supported: 2048×1152，1920×1200，2560×960; 5) Resolution supported: 1440×900 (12bit/10bit); 6) 1 light sensor interface; 7) Cascading supported; 8) 18bit gray scale processing and presentation; 9) Video format: RGB, YCrCb4:2:2, YCrCb4:4:4; 10) Standard 1U housing and independent power supply. X i ’a n N o v a S t a r T e c h C o ., L t d .
液晶屏ZJ070NA-01P规格书
CHIMEI INNO L U X DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: ZJ070NA-01P Date: 2012/01/11 Version: 01 ■Preliminary Specification □Final Specification For Customer ’s Acceptance Approved by Comment Approved by Reviewed by Prepared by Charlie Chou 2012/02/01 Wenyi Wang 2012/02/01 David Lee 2012/01/31 深显实业有限公司 https://www.wendangku.net/doc/c115578009.html,
CHIMEI InnoLux copyright 2004 All rights reserved, Copying forbidden. Record of Revision Version Revise Date Page Content Pre-Spec.01 2012/01/11 Initial Release.
CHIMEI INNO L U X Contents 1. General Specifications (1) 2. Pin Assignment (2) 3. Operation Specifications (5) 3.1. Absolute Maximum Ratings (5) 3.1.1. Typical Operation Conditions (6) 3.1.2. Current Consumption (7) 3.1.3. Backlight Driving Conditions (7) 3.2. Power Sequence (8) 3.3. Timing Characteristics (9) 3.3.1. AC Electrical Characteristics (9) 3.3.2. Input Clock and Data Timing Diagram (9) 3.3.3. DC Electrical Characteristics (10) 3.3.4. Timing (11) 3.3.5. Data Input Format (12) 4. Optical Specifications (13) 5. Reliability Test Items (17) 6. General Precautions (18) 6.1. Safety (18) 6.2. Handling (18) 6.3. Static Electricity (18) 6.4. Storage (18) 6.5. Cleaning (18) 7. Mechanical Drawing (19) 8. Package Drawing (20) 8.1. Packaging Material Table (20) 8.2. Packaging Quantity (20) 8.3. Packaging Drawing (21)
触摸屏技术参数
智能交互系统参数 液晶面板 对角线尺寸65" 面板品牌SAMSUNG、LG、AU （原装进口A 规) 类型TFT-LCD S-PVA 分辨率1920 × 1080 (FHD) 点距（H×V） 0.744 × 0.744mm 亮度(典型值) 360cd/m2 对比度(典型值) 5000:1 动态对比度10000:1 可视角度(水平/垂直) 178°/178° 响应时间(灰阶) 8ms 可视区域(mm) 1440.6 × 814.6 mm 色素1670万色24Bit 色域(NTSC) 72% 背光WLED 显示比例16：9 响应时间>8ms 寿命>100000H 红外触摸特性 物体感应数（IR） 10点触控（前维护，可自由拆卸） 红外感应线数（W×D） 32767 × 32767 支持系统支持双系统触控（windwos 8 、Android 4.2） 点位精度2mm 接口定义USB 2.0(Full speed) 触摸力度零压力触摸 感应次数寿命600万次 响应时间>8ms 环境温度工作温度：0°C - 60°C ，保存温度：-25°C-70°C 环境湿度工作湿度：10% to 90% RH，保存湿度：10% to 90% RH 供电方式全双工USB 供电DC +5V 最大500mA 双核引擎性能 操作系统支持windows 2000/2003，XP/Vista，Windows 7 ，Windows 8(标配）CPU Intel? Core? i3 双核(2.5GHz) ，支持睿频加速≥3.1GHz 硬盘(HDD) 500GB 内存(DDR3) 1333MHz/4GB 网卡10M/100M 网络 USB 接口USB × 5（前面板3个，后面板2个）
液晶屏规格书系列-AUO
37.0”WXGA TFT LCD Title MODEL General BUYER *When you obtain standard approval, please use the above model name without suffix LC320WX1*MODEL SLA1 SUFFIX LG.Philips LCD Co., Ltd.SUPPLIER ))( (Final Specification Preliminary Specification ●FOR APPROVAL TV Product Development Dept. LG. Philips LCD Co., Ltd B.J. Choi / Engineer PREPARED BY H.S. Song / Manager REVIEWED BY J.H Yoon / Senior Manager SIGNATURE DATE APPROVED BY Please return 1 copy for your confirmation with your signature and comments. / / / SIGNATURE DATE APPROVED BY SPECIFICATION
Contents 26PRECAUTIONS 926MOUNTING PRECAUTIONS 9-126OPERATING PRECAUTIONS 9-227ELECTROSTATIC DISCHARGE CONTROL 9-327PRECAUTIONS FOR STRONG LIGHT EXPOSURE 9-427STORAGE 9-527HANDLING PRECAUTIONS FOR PROTECTION FILM 9-6138INTERFACE CONNECTIONS 3-2COLOR INPUT DATA REFERENCE 3-525DESIGNATION OF LOT MARK 8-125PACKING FORM 8-225PACKING 824EMC 7-21COVER 2CONTENTS 3RECORD OF REVISIONS 4GENERAL DESCRIPTION 15ABSOLUTE MAXIMUM RATINGS 26ELECTRICAL SPECIFICATIONS 36ELECTRICAL CHARACTERISTICS 3-110SIGNAL TIMING SPECIFICATIONS 3-312SIGNAL TIMING WAVEFORMS 3-414POWER SEQUENCE 3-616OPTICAL SPECIFICATIONS 420MECHANICAL CHARACTERISTICS 523RELIABILITY 624INTERNATIONAL STANDARDS 724SAFETY 7-1Page ITEM Number
32寸触摸一体机参数
二代32寸触摸一体机参数 第二代触摸一体机的用户说明书发展越来越迅速，市场空间越来越大。教育行业需求一日比一日多，商业连锁店也大量上此产品 ，企业会议再也不用投影，而是转型到触摸一体机，政务部门都在争先恐后的上触摸一体机互动广告机。 那么今天我们从第二代触摸一体机构建的触摸屏说起。 第二代触摸一体机核心组成部分是触摸屏。 那么在说触摸一体机组成的触摸屏之前，我重点在解说下四种触摸屏。 触摸屏分四种性质的，是根据它们的物理原理而得的。 红外触摸屏技术特点不做过多的解释。主要谈它的应用。 红外触摸屏不受环境影响。不怕污渍，不怕水，不怕长时间点击，不怕风。而且4四种触摸屏种，只要红外触摸屏才能做大尺寸的。什么叫大尺寸，这里我定义为32寸以上的。只有红外触摸屏才能做32寸
以上的，现在市面上红外触摸屏能做到200寸甚至以上。 英文全译； Thegreatandgooddonotdie.feel.HereIwastwelveyearsold,butwhen thecompletecomes.Bobstarredtostandupandjostledthetable,andh einthem.talklow,agesago.eveninthisworld,Hewasalwaysthere.Iw illreadsomethingthatrequireseffort.butnottoolong,Hisjobwast orollangleironontoaconveyorsothattheweldersfartheruptheprod https://www.wendangku.net/doc/c115578009.html,workvertically,T hegreatandgooddonotdie.Iwillsavemyselffromtwopests,agesago. Heworkedhardandwouldstayoutuntilhecaughtenoughtofeedhefamil y.especiallyhisfamily,Trisha,theirspiritswalkabroad. 而且它还有一个特点，然后物体都可以触摸，他是靠红外灯光发色红外线技术产生触摸的。只要是物体在上面触摸，就是将亮变暗。只要里面灯管不坏，就一直能精准触摸。寿命至少在6000万次点击。 如果说当需要此品的时候，因为市场太混乱，而大众盲目的接收各种信息，何从辨别呢？ 那么又是否有在触摸一体机里面的三星和苹果这样的公司呢? 也许触派电子可以算是！但后面更强大的也再慢慢崛起。
P1.5小间距led显示屏规格书
金钱豹P1.5户内超高全彩屏产品规格书 产品参数： 箱体图片展示 产品特点： ◆ 箱体针对指挥控制,安防监控屏幕特点规划成16:9,轻松替代4:3或16:9的传统显示器件； ◆ 压铸铝箱体，精度高，确保屏体平整无缝； ◆ 箱体内部上下左右都有调节螺杆，可根据情况调节亮暗线问题；真正做到无亮暗线; ◆ 磁吸式模组设计，模组、系统卡以及电源都支持前维护，且所有的卡跟电源都双备份； ◆ 画面均匀一致，采用非线性逐点校正技术,图像更清晰，层次感更强； ◆ 上下左右140度视角，广播级色域，色温及亮度智能可调，更适合长时间观看； ◆ 业内领先6H 技术，实现低亮高灰、高抗静电、高刷新； ◆ 模块化设计，安装及维护成本低、速度快；专利散热技术，无风扇、无噪音、节能环保； ◆ 应用领域：礼堂、会议室、宴会、前厅、展览演示、交通、演播厅、指挥监控； 模组图片
模组参数 名称规格参数 模组点间距、分辨率、尺寸 1.583mm、96*108、152*171*2mm 像素结构、 LED封装方式1R1G1B、SMD1010 工作电压、模组功率DC4.5V、13.5W 驱动IC、扫描方式6690、1/32 HUB QP-HUB(KLTi6-SL-P1.58)-V1.1 箱体参数 箱体材质、箱体净重(kg/箱体) 铸铝、9.5kg/箱体 箱体分辨率、尺寸、模组排列384*216、608*342*73mm、4X2 像素点密度400689 Dots/㎡白平衡亮度、白平衡色温500 CD/㎡、6000K-8000K 视角、屏面平整度、模组间隙H/V:160°/160°、＜0.1mm、＜0.1mm 最大功率、平均功耗550W/㎡、185W/㎡换帧频率、刷新频率、灰度/颜色60Hz、1920-3840HZ、14bit 控制系统、系统支持CHIPSHOW、Windows XP,WIN 7 工作温度、防护等级-10~40℃、前/后：IP31/IP31 *根据配置不同，参数略有变化。 备注：仅供参考，欢迎来电咨询，最终解释权归属深圳市齐普光电子股份有限公司。
触摸屏工位终端配置规格书
KIO-TX21/5 “科奥”牌触摸屏工位终端 产品特点: ●科奥标准机型。外观简洁流畅。 ●设计符合人体工程学，查询方便自然。 ●整机结构一体化设计，机身主体采用1.5mm厚 冷轧钢板。整个机柜全部采用数控工艺精制而成。 ●按照国家产品标准生产，符合产业标准。 技术性能： 设备配置技术参数 显示器显示类型TFT-LED 屏幕尺寸21.5.0”（16：9） 分辨率1920 * 1080/1366 *768/1024 *768 亮度 / 对比度250 cd /20000：1 计算机（标配）CPU Intel I3 3220 双核 2.9G处理器 标准内存KST 2G DDRIII 1333内存 主板Intel GA-H61级主板 硬盘32G全固态SSD硬盘SATAII/500G/ST硬盘主机电源ATX300W主机电源 声卡 / 图形卡集成图形显示卡 / 声卡 网卡集成10 / 100MB自适应网卡 附件接口音频接口 2 串行口 / 并行口COM1 COM2 LPT1，USB2.0 键盘 / 鼠标PS/2 * 2 外接网络口RJ- 45*1 环境条件工作温度 5 ~ 45oC 相对湿度20 ~ 80% 触摸屏分辩率4096*4096 触摸屏类型红外/电容屏 线性误差 1.5mm 响应速度8ms 触摸介质任何不透明之物体 最小触摸物体3mm 接口方式USB/RS232 外型尺寸高*宽*深（mm）1515 * 650 *350 产品重量台/KG TX215：52KG 输入电源/ 220VAC、50HZ、2.0A 材质/ 冷轧钢板/表面金属喷漆 颜色可定制标准：钻石银色 / 背面亚光磨砂黑色
标准触摸屏尺寸表(3.5-52寸)
标准触摸屏尺寸表(3.5-52寸) 型号屏尺 寸 外形尺寸可视尺寸操作尺寸 引出线 间距 引出线 长度 屏比出线位: DUER-0350-W4R-A 3.5寸76.5X63.4 71.4X55.3 71X54.9 1.0 63 4:3 上左DUER-0350-W4R-B 3.5寸87.8X53 78.2X44.3 77.8X43.9 1.0 63 16:9 上左DUER-0350-W4R-C 3.5寸81.3X54.8 75.1X47.6 75.1X47.6 1.0 63 16:9 上中DUER-0370-W4R 3.7寸82.51x63.27 78.03X57.17 78.03X57.17 1.0 63 4:3 上左DUER-0380-W4R 3.8寸83.5X67 79.4X59.4 79.4X59.4 1.0 63 4:3 上中DUER-0380-W4R-A 3.8寸83.1X66.4 74.1X55.7 72.1X53.7 1.0 63 4:3 上中DUER-0385-W4R 3.85寸91.3X72 81X60 79X58 1.0 63 4:3 上左DUER-0430-W4R-A 4.3寸105X64 97.8X56.7 97.8X56.7 1.0 63 16:9 上中DUER-0430-W4R-B 4.3寸105.5X67.2 96.2X56.1 96.2X56.1 1.0 63 16:9 上左DUER-0440-W4R 4.4寸102.8X64.2 94.1X60.2 94.1X60.2 1.0 63 16:9 右下DUER-0450-W4R 4.5寸104.7X65.9 98.7X57.5 95.44X54.26 1.0 63 4:3 上中DUER-0470-W4R 4.7寸111X93.3 103.4X84.5 103.4X84.5 1.0 63 4:3 上中DUER-0480-W4R 4.8寸131X78 114X64 108X58 2.54 63 16:9 上右DUER-0500-W4R 5.0寸119.2X90.8 108.1X79.9 108.1X79.9 1.0 63 4:3 上右DUER-0570-W4R 5.7寸132.5X104.8 124.6X95.9 116X88.3 1.0 63 4:3 右中DUER-0580-W4R 5.8寸144.5X88.7 127．9X72.9 127．9X72.9 1.0 63 16:9 上左DUER-0580-W4R-A 5.8寸138X108 118X89 116X87 2.54 63 4:3 上右DUER-0580-W4R-B 5.8寸135.5X103 122X92 119X89 2.54 63 4:3 上中DUER-5880-W4R 5.88寸140X104 122.1X93.3 119.2X90.3 2.54 63 4:3 右中DUER-0630-W4R 6.3寸149.7X89.4 142.6X81.3 142.2X80.96 1.0 63 16:9 上中DUER-0650-W4R 6.5寸157X90 141.1X78.1 140.7X77.7 1.0 63 16:9 上右DUER-0650-W4R-A 6.5寸155X89.2 145.4X80.93 142.4X77.93 1.0 63 16:9 上中DUER-0700-W4R-A 7.0寸165.5X99.8 158.9X89.7 158.5X89.3 1.0 63 16:9 上左DUER-0700-W4R-B 7.0寸164.5X103 160X94.5 158X92.5 2.54 63 16:9 上左DUER-0700-W4R-C 7.0寸155X105 146X93 144X91 1.2 83 16:10 上左DUER-0700-W4R-D 7.0寸165X100 155.6X87.6 155.2X87.2 1.0 63 16:9 上中DUER-0700-W4R-E 7.0寸165X104 155X94 155X94 1.0 63 16:10 上左DUER-0700-W4R-F 7.0寸164.8X99.8 153X86 152.4X84.4 1.0 63 16:9 下中DUER-0700-W4R-G 7.0寸165X100 155.6X87.6 155.2X87.2 1.0 63 16:9 上中DUER-0700-W4R-H 7.0寸164.8X103.8 153.5X93 151.5X91 1.0 63 16:10 右下DUER-0700-W4R-J 7.0寸164X103 155X94 155X94 1.0 63 16:10 下中(左) DUER-0740-W4R 7.4寸171.9X127.4 148.9X112.4 145.9X109.4 2.54 63 4:3 右下DUER-0800-W4R 8.0寸183X141 167X126 165X127 2.54 63 4:3 右下DUER-0800-W4R-A 8.0寸192.8X116.9 180.1X103.4 176.64X99.36 2.54 63 16:9 下右DUER-0840-W4R 8.4寸208X152 182X139 180X137 2.54 63 4:3 右下DUER-0840-W4R-A 8.4寸183.4X139.5 181.7X174.4 181.7X174.4 2.54 63 4:3 右下DUER-0840-W4R-B 8.4寸185X149.3 174.5X132 169X126 2.54 63 4:3 下中DUER-0848-W4R 8.48寸188.9X141.7 174X131.5 172X129.5 2.54 63 4:3 左中DUER-0890-W4R 8.9寸207X126 201.5X120 201.5X120 1.0 63 16:10 上左DUER-0890-W4R-A 8.9寸207X126 197X116 195x114 1.0 63 16:9 上左(配奇美屏)