12-17-98SB98107
Rev. A
Form No. ACH Page 1 of 2BIF Doc #1041
Catalog Symbol:ACH Fast-Acting
Ampere Rating: 1 to 60 Amperes Voltage Rating: 208 Volts AC
125 Volts DC
Interrupting Rating: 6000A @ 120 VAC 4200A @ 208 VAC 6000A @ 125 VDC At sea level to 6000 ft.
Test specification - carry 200% rated current for 5 minutes,open at 240% within 5 minutes.
For Military Use
Qualified to MIL-F-5372C
Military Type Buss Cat.Designation Symbol MS28938-02ACH2MS28938-03ACH3MS28937-05ACH5MS28937-10ACH10MS28938-15ACH15MS28937-20
ACH20
Military Type Buss Cat.Designation Symbol MS28938-25ACH25MS28937-30ACH30MS28938-35ACH35MS28937-40ACH40MS28937-50ACH50MS28937-60
ACH60
Symbol Amperes A B C D ACH 2, 3, 5, 10, 15, 1.97∑0.06∑0.48∑ 1.33∑20, 25 or 30(50.0mm)(1.59mm)
(12.3mm)
(33.8mm)ACH
35, 40, 50 or 60
2.22∑0.09∑0.55∑ 1.45∑(56.39mm)
(2.27mm)(13.97mm)
(36.83mm)
Buss Aircraft Fuses
Mechanical Indicating - Limiter type
?ACH limiters are designed to meet the very rigorous require-ments of high speed, high performance aircraft.
?Isolate faults or grounds in aircraft electric systems of 120/208 volts 400 cycles AC or 125 volts DC.
?ACH limiters give visual indication when open by a spring-activated pin that extends from the limiter body.
?The knife blade terminals on ACH limiters are silver-plated.?Limiters are made with a silicone body that assures reliable performance under severe conditions.
?Designed to withstand exposure to moisture, fungus, salt spray, sand and dust, and mechanical vibration and shock.
Dimensional Data
All other tolerances (±0.005) in
(±0.13) mm
(4.76mm)
12-17-98SB98107
Rev. A
Form No. ACH Page 2 of 2BIF Doc #1041
The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information con-tained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
1 to 30 Amp
Catalog Dimension of Number base, inches 3887 (1-pole)0.688∑ ≈ 3.125∑3888 (2-pole) 1.188∑ ≈ 3.125∑3967(3-pole)
1.625∑ ≈ 3.125∑
35 to 60 Amp
Catalog Dimension of Number base, inches 3889(1-pole)0.844∑ ≈ 3.375∑3890(2-pole) 1.594∑ ≈ 3.375∑3968(3-pole)
2.25∑ ≈
3.375∑
Fuseblocks
?All metal parts silver-plated.?Clips are beryllium copper.
?The blocks have molded melamine base and are qualified to MIL-F-5373C.
10
100
1,000
2,000
4
100
10
1
.1
.01
T I M E I N S E C O N D S
AMPERE RATING
10
20
40305060
CURRENT IN AMPERES
Time-Current Characteristic Curves–Average Melt